The Squid Team are pleased to announce the release of Squid-3.3.14.
This new release is available for download from http://www.squid-cache.org/Versions/v3/3.3/ or the mirrors.
A large number of the design flaws in SSL-Bump feature have been fixed along with general improvements all around. While this release is not fully bug-free we believe it is ready for use in production on many systems.
We welcome feedback and bug reports. If you find a bug, please see http://wiki.squid-cache.org/SquidFaq/BugReporting for how to submit a report with a stack trace.
Although this release is deemed good enough for use in many setups, please note the existence of open bugs against Squid-3.3.
The 3.3 change history can be viewed here.
Squid 3.3 represents a new feature release above 3.2.
The most important of these new features are:
Most user-facing changes are reflected in squid.conf (see below).
log_db_daemon - Database logging daemon for Squid
This program writes Squid access.log entries to an SQL database. Written in Perl it can utilize any database supported by the Perl database abstraction layer.
NOTE: Presently it only accepts the Squid native log format.
ext_time_quota_acl - Time quota external ACL helper.
Allows an administrator to define time budgets (quota) for the users of Squid to limit the time using Squid.
This is useful for corporate lunch time allocations, wifi portal pay-per-minute installations or for parental control of children.
The administrator can define a time budget (e.g. 1 hour per day) which is enforced through this helper using session estimations of their browsing time. A 'pause' threshold is given in seconds and defines the period between two requests to be treated as part of the same session. Pauses shorter than this value will be counted against the quota, longer ones ignored.
Details at http://wiki.squid-cache.org/Features/BumpSslServerFirst.
When an intercepted connection is received, Squid first connects to the server using SSL and receives the server certificate. Squid then uses the host name inside the true server certificate to generate a fake one and impersonates the server while still using the already established secure connection to the server.
Bumping server first is essentially required for handling intercepted HTTPS connections but the same scheme should be used for most HTTP CONNECT requests because it offers a few advantages compared to the old bump-client-first approach:
Details at http://wiki.squid-cache.org/Features/MimicSslServerCert.
One of the SslBump features serious drawbacks is the loss of information embedded in SSL server certificate. This certificate mimic feature passes original SSL server certificate information to the user. Allowing the user to make an informed decision on whether to trust the server certificate.
The request_header_add option is added to insert HTTP header fields to outgoing HTTP requests (i.e., request headers sent by Squid to the next HTTP hop such as a cache peer or an origin server). The option has no effect on cache hit traffic or requests serviced by Squid and ICAP.
WARNING: If a standard HTTP header name is used, Squid does not check whether the new header conflicts with any existing headers or violates HTTP rules. If the request to be modified already contains a field with the same name, the old field is preserved but the header field values are not merged.
Field-value set can be either a token or a quoted string. If quoted string format is used, then the surrounding quotes are removed while escape sequences and %macros are processed.
In theory, all of the logformat codes can be used as %macros. However, unlike logging (which happens at the very end of transaction lifetime), the transaction may not yet have enough information to expand a macro when the new header value is needed. And some information may already be available to Squid but not yet committed where the macro expansion code can access it (please report such instances!). The macro will be expanded into a single dash ('-') in such cases. Not all macros have been tested.
One or more Squid ACLs may be specified to restrict header injection to matching requests. As always in squid.conf, all ACLs in an option ACL list must be satisfied for the insertion to happen. The request_header_add option supports fast ACLs only.
There have been changes to Squid's configuration file since Squid-3.2.
This section gives a thorough account of those changes in three categories:
Whether Squid is to pass-through If-Modified-Since and If-None-Match headers on cache MISS. Revalidation requests can prevent cache gathering objects to HIT on.
Based on the Squid-2.7 ignore_ims_on_miss feature.
IMPORTANT: the meaning for on/off values has changed along with the name since 2.7.
New directive to add custom headers on HTTP traffic sent to upstream servers.
New option to determine how the client certificate sent to upstream servers is signed.
New option to adapt certain properties of outgoing SSL certificates generated for use when bumping SSL to an upstream server.
myport and myipACL types replaced with localport and localip respectively. To reflect that it matches the TCP connection details and not the squid.conf port. This matters when dealing with intercepted traffic, where the Squid receiving port differs from the TCP connection IP:port. Always use myportname type to match the squid.conf port details.
New default built-in ACLs for testing SSL certificate properties.
ssl::certHasExpired, ssl::certNotYetValid, ssl::certDomainMismatch, ssl::certUntrusted, ssl::certSelfSigned.
IP address 127.0.0.1 (localhost IPv4) is no longer masked.
%ACL format tag ported from 2.6. Sends the name of ACL being tested to the external helper.
%DATA format tag ported from 2.6. Inserts the ACL arguments into a particular location of the helper input instead of at the end of the line.
New token %ssl::bump_mode to log the SSL-bump mode type performed on a request. Logs values of: -, none, client-first, or server-first.
New token of %ssl::>cert_subject to log the Subject field of a SSL certificate received from the client.
New token of %ssl::>cert_issuer to log the Issuer field of a SSL certificate received from the client.
New action types none, client-first, server-first. The default is none.
Use of allow/deny is now deprecated and they should be removed as soon as possible. To retain the exact same behaviour between 3.3 and older releases replace deny with none, and allow with client-first. However an upgrade to server-first is the recommended.
NOTE: Mixing of allow/deny with the new action types is prohibited and will cause Squid to exit with a FATAL error.
This option has been replaced by the cache_miss_revalidate feature.
There have been some changes to Squid's build configuration since Squid-3.2.
This section gives an account of those changes in three categories:
There are no new ./configure options in Squid-3.3.
kqueue network I/O module is now built by default when it is available. This option is no longer required to enable kqueue support, but if used will abort build when kqueue dependencies are missing or broken.
kqueue network I/O module is now built by default when it is available. This configure option is now needed to disable it. Previously it did nothing.
This has not been supported by Squid for several versions.
Some squid.conf and ./configure options which were available in Squid-2.7 are not yet available in Squid-3.3
If you need something to do then porting one of these from Squid-2 to Squid-3 is most welcome.
Not yet ported from 2.6
COSS storage type is lacking stability fixes from 2.6
COSS overwrite-percent= option not yet ported from 2.6
COSS max-stripe-waste= option not yet ported from 2.6
COSS membufs= option not yet ported from 2.6
COSS maxfullbufs= option not yet ported from 2.6
idle= not yet ported from 2.7
monitorinterval= not yet ported from 2.6
monitorsize= not yet ported from 2.6
monitortimeout= not yet ported from 2.6
monitorurl= not yet ported from 2.6
Not yet ported from 2.6
Not yet ported from 2.6
Not yet ported from 2.6
Not yet ported from 2.7
Not yet ported from 2.6
Not yet ported from 2.6
Not yet ported from 2.6
Not yet ported from 2.6
stale-while-revalidate= not yet ported from 2.7
ignore-stale-while-revalidate= not yet ported from 2.7
negative-ttl= not yet ported from 2.7
Not yet ported from 2.7
Not yet ported from 2.7
Not yet ported from 2.7
Not yet ported from 2.7
Not yet ported from 2.7