Table of contents 1.0 Document id 1.1 General 1.2 What is Procmail? 1.3 Abbreviations and thanks 1.4 Version information 1.5 Document layout and maintenance 1.6 About presented recipes 1.7 Variables used in recipes 1.8 About "useless use of cat award" 2.0 UBE in Internet 2.1 Terms used and foreword 2.2 UBE strategies 2.3 UBE and bouncing message back 2.4 UBE and "I don't mind" attitude 2.5 We need a law against UBE 3.0 Anti-UBE pointers 3.1 NoCEM, CAUCE and others 3.2 General Filtering pages (more than procmail) 3.3 Junk email and spam 3.4 Comprehensive list of spammers 3.5 Misc pointers 3.6 Questionable UBE stop services 3.7 UBE related newsgroups or mailing lists 3.8 Software: adcomplain -- Perl junk email rport 3.9 Software: Ricochet -- Perl junk email rport 3.10 Software: yell -- perl 3.11 Software: RBL lookup tool -- C 3.12 Software: mapSoN 3.13 Software: spamgard 3.14 Software: Spam Be Gone 3.15 Software: ifile - Perl 3.16 Software: ClearMail 4.0 Procmail pointers 4.1 Where to get procmail binary 4.2 Where is procmail developed 4.3 About procmail's Y2K compliance 4.4 Procmail mailing lists 4.5 Procmail recipe modules and faqs 4.6 Procmail mode for Emacs 4.7 Procmail module list 4.8 Where to get Procmail code and modules 4.9 Procmail code to filter UBE 5.0 Dry run testing 5.1 What is dry run testing 5.2 Why the From field is not okay after dry run 5.3 Getting default value of a procmail variable 6.0 Things to remember 6.1 Get the newest procmail 6.2 Csh's tilde is not supported 6.3 Be sure to write the recipe start right 6.4 Always set SHELL 6.5 Check and set PATH 6.6 Keep the log on all the time 6.7 Never add a trailing slash for directories 6.8 Remember what term DELIVERED means 6.9 Beware putting comment in wrong place 6.10 Brace placement 6.11 Local lockfile usage 6.12 Global lockfile 6.13 Gee, where do I put all those ! * $ ?? 6.14 Sending automatic reply, use X-loop header 6.15 Avoid extra shell layer (check command for SHELLMETAS) 6.16 Think what shell commands you use 6.17 Using absolute path when calling a shell program 6.18 Disabling recipe temporarily 6.19 Keep message backup, no matter what 6.20 Order of the procmail recipes 7.0 Procmail flags 7.1 The order of the flags 7.2 Flag w and recipe with | 7.3 Flag w, lockfile and recipe with | 7.4 Flag f and w together 7.5 Flags h and b 7.6 Flag h and sinking to /dev/null 7.7 Flag i and pipe flag f 7.8 Flag r 7.9 Flag c's background 7.10 Flag c before nested block forks a child 7.11 Flag c and understanding possible forking penalty 7.12 Flags before nested block 7.13 Flags aAeE tutorial 8.0 Matching and regexps 8.1 Philosophy of abstraction in regexps 8.2 Matches are not case sensitive 8.3 Procmail uses multiline matches 8.4 Headers are folded before matching 8.5 Improving Space-Tab syndrome 8.6 Handling exclamation character 8.7 Rules for generating a character class 8.8 Matching space at the end of condition 8.9 Beware leading backslash 8.10 Correct use of TO Macro 8.11 Procmail's regexp engine 8.12 Procmail and egrep differences 8.13 Undesrtanding procmail's minimal matching (stingy vs. greedy) 8.14 Explaining \/ and ()\/ 8.15 Explaning ^^ and ^ 8.16 ANDing traditionally 8.17 ORing traditionally 8.18 ORing and score recipe 8.19 ORing by using De Morgan rules 9.0 Variables 9.1 Setting and unsetting variables 9.2 Variable initialisation and sh syntax 9.3 Testing variables 9.4 What does $\VAR mean? 9.5 Common pitfalls when using variables 9.6 Quoting: Using single or double quotes 9.7 Quoting: Passing values to an external program 9.8 Passing values from an external program 9.9 Incrementing a variable by a value N 9.10 Comparing values 9.11 Strings: How many characters are there in a given string? 9.12 Strings: How to strip trailing newline. 9.13 Strings: deriving the last N characters of a string. 9.14 Strings: Getting partial matches from a string. 9.15 Strings: Procmail string manipulation example 9.16 How to raise a flag if the message was filed 9.17 Dollar sign in condition lines. 9.18 Finding mysterious foo variable 9.19 Storing code to variable 9.20 Getting headers into a variable. 9.21 Converting value to lowercase 10.0 Suggestions and miscellaneous 10.1 Speeding up procmail 10.2 See the procmail installation's examples 10.3 Printing statistics of your incoming mail 10.4 Storing UBE mailboxes outside of quota 10.5 Using first 5-30 lines from the message 10.6 Using cat or echo in scripts? 10.7 How to run an extra shell command as a side effect? 10.8 Forcing "ok" return status from shell script 10.9 Make your own .procmailrc available to others 10.10 Using dates efficiently 10.11 Keep simple header log 10.12 Gzipping messages 10.13 Emergency stop for your .procmailrc 11.0 Scoring 11.1 Using scores by an example 11.2 Brief Score tutorial 11.3 Score's scope 11.4 Counting length of a string 11.5 Counting lines in a message (Adding Lines: header) 11.6 Determining if body is longer than header 11.7 Matching last Received header 11.8 How to add Content-Length header 11.9 Testing message size or number of lines 11.10 Counting commas with recursive includerc 12.0 Formail usage 12.1 Fetching fields with formail -x 12.2 Always use formail's -rt switch 12.3 Using -rt and rewriting the From address 12.4 Formail -rt and Resent-From header 12.5 Quoting the message 12.6 Without quoting the message 12.7 How to include headers and body to the reply message 12.8 Adding text to the beginning of message 12.9 Adding text to the end of message 12.10 How to truncate headers (save filing space) 12.11 Adding extra headers from file 12.12 Splitting digest 12.13 Mailbox: Splitting to individual files 12.14 Mailbox: Extracting all From addresses from mailbox 12.15 Mailbox: Applying procmail recipe on whole mailbox 12.16 Mailbox: run series of commands for each mail (split mailbox) 12.17 Option -D and cache 12.18 Option -D and message-id in the body 12.19 Reducing formail calls (conditionally adding fields) 12.20 Formail -A -a options 12.21 Formail -e -s options 13.0 Saving mailing list messages 13.1 Using subroutine pm-jalist.rc to detect mailing lists 13.2 Using plus addressing foo+bar@address.com 13.3 Using RFC comment trick for additional information 13.4 Simple mailing list handling 13.5 Archiving according to TO 13.6 Using Return-Path to detect mailing lists 14.0 Procmail, MIME and HTML 14.1 Mime Bibliography 14.2 Mime notes 14.3 Software to deal with mime or html 14.4 Mime content type application/ms-tnef 14.5 Trapping html mime messages 14.6 Complaining about html messages 14.7 Converting HTML body to plain text 14.8 Getting rid of unwanted mime attachments (html, vcard) 14.9 Sending contents of a html page in plain text to someone 15.0 Simple recipe examples 15.1 Saving: MH folders -- numbered messages 15.2 Saving: to monthly folders 15.3 Modifying: Filtering basics 15.4 Modifying: Squeezing empty lines around message body 15.5 Modifying: shuffling headers always to same order 15.6 Service: Auto answerer to empty messages 15.7 Service: File server -- send fileas as attachments upon request 15.8 Service: Ping responder 15.9 Service: simple vacation with procmail 15.10 Service: vacation code example 15.11 Service: Auto-forwarding 15.12 Service: forward only specific messages 15.13 Service: Making digests 15.14 Kill: killing advertisement headers and footers 15.15 Kill: simple killfile recipe with procmail 15.16 Kill: duplicate messages 15.17 Kill: spam filter with simple recipes 15.18 Kill: (un)subscribe messages 15.19 Time: Once a day cron-like job 15.20 Time: Running a recipe at a given time 15.21 Time: Triggering email and using cron 15.22 Decoding: Uudecode 15.23 Decoding: MIME 15.24 How to send commands in the message's body 15.25 Matching two words on a line, but not one 15.26 How to define personal XX macros? 15.27 How to change subject by body match 15.28 How to change Subject according to some other header 15.29 How to call program with parameters 16.0 Miscellaneous recipes 16.1 Matching valid Message-Id header 16.2 Sending two files in a message 16.3 Excessive quoting of message 16.4 Sending message to pager in chunks 16.5 Playing particular sound when message arrives 16.6 Combining multiple Original-Cc and Original-To headers 16.7 Forwarding sensitive messages in encrypted format 17.0 Procmail and PGP 17.1 Decrypt pgp messages automatically 17.2 Getkeys from keyserver 17.3 Auto grab incoming pgp keys 18.0 Includerc usage 18.1 Using: multiple rc files 18.2 Using: You can call rc file conditionally 18.3 Autoloading an rc file 18.4 Making: naming of the rc file 18.5 Making: Using namespace when saving procmail variables 18.6 Making: Public and private variables in rc file 18.7 The rules of thumb for constructing general purpose rc file 18.8 An includerc skeleton 19.0 Mailing list server 19.1 Mailing list server pointers 19.2 Simple Mailing list server 20.0 Common troubles 20.1 Procmail modes: normal, delivery, and mailfilter. 20.2 Procmail as sendmail Mlocal mail filtering device 20.3 Procmail doesn't pass 8bit characters 20.4 My ISP isn't very interested in installing procmail 20.5 My ISP has systemwide procmailrc; is this a good idea? 20.6 Procmail changes mailbox and directory permissions 20.7 Changing mbox permission during compilation to 660 20.8 The .forward file must be real file 20.9 Using .forward if procmail already is LDA 20.10 Mail should be put in the mailqueue if write fails 20.11 Qmail: how to make it work with procmail 20.12 Qmail: Procmail looks file from /var/spool/mail only 20.13 Qmail: patch to procmail 3.11pre7 to work with Maildirs 20.14 AFS: How to use Procmail when HOME is in AFS cell 20.15 Help, some idiot sent my address to 30 mailing lists 20.16 Help, Procmail beeps and prints to my console 20.17 Help, procmail dumps mail to console 20.18 Help, corrupted From_ line in mailbox 20.19 Directing user's mail to HOME instead of /var/spool/ 20.20 NFS mounting /var/mail is a good way to get bad performance 20.21 I can't see the sendmail's response in LOGFILE 20.22 Compiling procmail and choosing locking scheme 20.23 Forwarding lot of mail causes heavy load 20.24 What happens to mail if MDA Procmail fails 20.25 Procmail reads entire 90Mb message into memory 20.26 Help, procmail uses occasionally huge chunk of memory 20.27 Procmail signalled out of memory in my verbose log 20.28 Variables DEFAULT and ORGMAIL 20.29 When DEFAULT cannot be mailed to 20.30 Variable DROPPRIVS 20.31 Variable HOME 20.32 Variable HOST 20.33 Variable LINEBUF 20.34 Variable LOG and LOGFILE 20.35 Variable TRAP 20.36 Variable UMASK 20.37 UMSAK and permissions 20.38 Performance difference between backtick and "|" recipe 20.39 Procmail's temporary file names while writing file out 20.40 Parameter $@ 20.41 Procmail variables are null terminated (detecting null string) 20.42 FROM_DAEMON TO and TO_ and case-sensitiveness 20.43 TO_ macro deciphered 20.44 TO_ macro and RFC 822 20.45 FROM_DAEMON deciphered 21.0 Technical matters 21.1 List of exit codes 21.2 List of precedence codes 21.3 Sendmail and -t 21.4 RFC822 Reply-To and formail problem with multiple recipients 21.5 Procmail and IMAP server 21.6 Machine which processes mail 21.7 Compiling procmail and MAILSPOOLHOME 22.0 Smartlist 22.1 MLM RFC 22.2 Other mailing list software 22.3 SmartList code (mailing list implementation with procmail) 22.4 Installation trouble: getparams 22.5 Accepting mail only from users in whitelist(s) 23.0 Additional procmail or MUA software 23.1 Comstat to handle multiple mailboxes 23.2 Elm and pgp support (Mutt) 23.3 MH sites 24.0 Additional procmail software for Emacs 24.1 What is Emacs 24.2 Emacs and procmail mode and Lint 24.3 Emacs and lining up backslashes 24.4 Emacs and browsing mailbox files 24.5 Emacs and live-mode.el 24.6 Emacs and font-lock.el 25.0 Procmail, Emacs and Gnus 25.1 Gnus pointers 25.2 Why use procmail with Gnus 25.3 Setting up gnus for procmail - Basics 25.4 Gnus for procmail - More gnus 25.5 Emacs and Gnus -- Fiddling with spool files 25.6 Gnus and article snippets 25.7 Emacs GNUS - POP - Procmail 26.0 RFC, Request for comments 26.1 RFCs and their jurisdiction (munged Addresses) 26.2 Comments about addresses munging 26.3 RFC and valid email address characters 26.4 RFC and login-name@fdqn 26.5 RFCs and message's signature 26.6 RFC and using MIME in usenet newsgroups 26.7 Some RFC Pointers 27.0 Introduction to E-mail Headers 27.1 To find out more about email (Resources) 27.2 Lecture by Alan Stebbens 27.3 Applied to received messages 27.4 Bcc lecture by Alan Stebbens 27.5 Bcc lecture by Philip Guenther 28.0 Message's headers 28.1 What is correct From address syntax 28.2 What's that X-UIDL header? 28.3 What is that first From_ header? 28.4 Message-Id header 28.5 Received header 28.6 Return-Path 28.7 Errors-To 28.8 X-Subscription-Info 28.9 Reply-To header 28.10 Mail-Copies-To header 28.11 Mail-Followup-To and Reply-To-Personal headers 28.12 Content-Length header and From_ specification 28.13 Moral about CC copies in usenet 29.0 Other interesting code 29.1 Misc email related pointers 29.2 Expire mail pointers 29.3 Usenet News related pointers 29.4 Code: Perl Extract procmail man pages from 3.11pre7.tar.gz 29.5 Code: Sh remove matching lines from file 1.0 Document id 1.1 General .@(#) $Id: pm-tips.txt,v 2.1 1999/12/27 15:13:10 Jari Aalto Exp $ .$Keywords: procmail sendmail formail mail UBE UCE spam filter $ .$URL: http://www.procmail.org/jari/ $ .$Contactid: $ .$FileServer: send mail to Contactid with subject "send help" $ .$UrlLinksLastChecked: 1999-04-30 $ .@(#) This is a procmail tips page: a collection of procmail recipes, .@(#) instructions, howtos. The document also contains URL pointers to .@(#) the procmail mailing list and sites that fight against Internet .@(#) UBE. You will also find many other interesting subjects that .@(#) discuss about internet email: headers, mime and RFCs. There is .@(#) also lot of room dedicated to Emacs and Gnus, simply because .@(#) those are the best tools you find from Unix to deal with your .@(#) mail and news reading. And I happen to know Emacs quite well. .@(#) The tips are compiled from the procmail discussion list, .@(#) from comp.mail.misc and from the author's own experiences with .@(#) procmail. This document does not intend to teach you the basics of procmail; instead you have to be familiar with the procmail man pages already. You may want to read *Nancy's* and *Era's* procmail faq pages before this page. Especially Era's link page contains an excellent collection of useful procmail links and pointers to unix programs that deal with email (eg. Perl *MHonArc* Email hyperarchiver at http://www.oac.uci.edu/indiv/ehood/mhonarc.html). If you find errors or things to improve in this document, please go ahead and send mail to [jari]. Author's homepage is behind these redirections links. Please keep these in your bookmark list, not the absolute addresses, because the sutes may move. These link should point always to the correct location: http://poboxes.com/jari.aalto/ eg. homepage.html http://home.eu.org/~jari/ If you want to have automatic notification whenever this page changes, please visit the link below. To get nicely formatted netmind messages, see procmail module `pm-janetmind.rc'. http://minder.netmind.com/ If a mentioned URL is not alive, you may still be able to successfully find it using the ftp search located at http://ftpsearch.ntnu.no/ 1.2 What is Procmail? [faq] Procmail is a mail processing utility, which can help you filter your mail, sort incoming mail according to sender, Subject line, length of message, keywords in the message, etc, implement an ftp-by-mail server, and much more. Procmail is also a complete drop-in replacement for your MDA. (If this doesn't mean anything to you, you may not want to know.) Procmail runs under Unix. See Infinite Ink's Mail Filtering and Robots page for information about related utilities for various other platforms, and competing Unix programs, too (there aren't that many of either). 1.3 Abbreviations and thanks People and documents, abbreviations referred to, tokens used, are in no particular order. [stephen] Stephen R. van den Berg, Author of Procmail Last heard from stephen 1997-08 in procmail mailing list by using address . Later 1998 due to his regular work activities and lack of time he nominated Philip Guenther to the head of Procmail development. .[aaron] Aaron Schrab .[alan] Alan K. Stebbens .[dan] Daniel Smith .[david] David W. Tamkin .[ed] Edward J. Sabol .[elijah] Eli the Bearded .[hal] Hal Wine .[jari] Jari Aalto .[philip] Philip Guenther .[richard] Richard Kabel .[sean] Sean B. Straw .[timothy] Timothy J Luoma .[walter] Walter Dnes .[faq] Procmail FAQ j1era+pr@iki.fi .[manual] Quote from some procmail manual page .#broken-link Link does not exist any more. A replacement is needed o PM-L, Procmail mailing list o FAQ-L, Faq Maintainers mailing list http://www.landfield.com/faq-maintainers/faq-server/ http://lists.consensus.com/scripts/lyris.pl?visit=faq-maintainers http://www.qucis.queensu.ca/FAQs/FAQaid/ o DING-L, Emacs Gnus mail/newsreader mailing list (ding). http://www.gnus.org/ o <> Text has been rephrased or something was added which does not exist in original message. I also thank following people o Era Eriksson proof read the v1.12 and sent corrections. o Karl E. Vogel sent numerous new anti-spam links to be added to the document. o John Gianni send some nice recipes: one is now in the procmail module list and the other ideas I have added to this tips file. o Tim Potter had a spare moment with v1.27 and sent lot of spelling corrections. Thank you. o took 1.48 and sent a huge 55k patch to correct many English language typos. Thank you very much Guido. o 1998-10-28 Richard Kabel sent massive patch to correct language and provided excellent improvement comments. o 1999-01-08 Steven Alexander thought that a small perl script would help me to fix spelling mistakes more easily. The script has been much better correction program that simple patches. Thank you. o 1999-06-16 Mark Seiden Did a enermous work to proofread the v1.74. He sent a massive 105k with many editorial corrections. My wholeheart thanks to you Mark. 1.4 Version information Here is version and file size log of the text file, which gives you some estimate how often you should update your copy. v1.01 1997-09-13 46 (k) v1.05 1997-09-14 53 v1.5 1997-09-16 76 v1.6 1997-09-18 94 v1.8 1997-10-01 127 v1.9 1997-10-11 142 v1.10 1997-10-13 181 archive file 1995-10's tips included v1.13 1997-11-08 218 Era's correction suggestions. v1.14 1997-11-25 260 v1.17 1997-12-09 343 up till archive 1996-07 now included v1.24 1997-12-30 415 up till 1996-12 is now included v1.29 1998-01-30 429 "regexp" section rewrite. v1.31 1998-03-10 469 Better ordering: ORing rules discussed v1.32 1998-03-23 471 All recipes checked (by eye) v1.34 1998-04-02 488 ORing and supreme scoring added v1.36 1998-04-03 493 Includerc rewritten, plus addressing v1.41 1998-06-17 510 How to disable recipe quickly with v1.44 1998-06-19 516 Detecting mailing lists with pm-jalist.rc v1.45 1998-06-23 521 All recipes checked by eye. Many fixes. v1.46 1998-06-24 526 Added live urls to procmail archive v1.49 1998-08-10 529 Guido.Van.Hoeck's 55k patch applied v1.51 1998-08-18 541 Small changes. MIME notes v1.52 1998-08-24 553 Flag c forking study, procmail wish list v1.53 1998-08-24 554 Procmail doesn't pass 8bit characters v1.55 1998-08-29 565 Fetching fields with formail -x v1.57 1998-10-06 575 PLUS addr. Convert HTML body to text v1.58 1998-10-12 583 SmartList and other MLM software discussed v1.60 1998-10-21 591 UMASK, .forward if procmail already is LDA v1.63 1998-10-30 595 Richard's english correction patch v1.64 1998-11-26 602 More Richard's comments integrated v1.66 1998-12-14 578 Philip took care of bugs/patches listing v1.67 1998-01-07 579 Eli's procmail recipes in module section v1.68 1998-01-29 587 Added "Lua" language pointer v1.69 1999-02-23 590 RFC and using MIME in usenet postings v1.70 1999-02-26 592 procmail's Y2K compliance v1.71 1999-03-29 597 Ricochet -- Perl script to fight UBE v1.72 1999-04-21 597 Links corrected v1.74 1999-04-26 599 document moved to www.procmail.org v1.76 1999-10-01 602 Mark Seiden's patch applied. Now under CVS. v2.1 1999-12-27 603 Netscape spam filters added 1.5 Document layout and maintenance This document is maintained in plain text format with Emacs and my text formatting package *tinytf.el* (automatic TOC and indentation control). Funny marks or indentation are in the text version so that the Perl text-to-html filter `t2html.pl' can be used. See more about this at: http://poboxes.com/jari.aalto/t2html.html Text version of this file was converted into HTML with command: % perl5.004_04 t2html.pl \ --html-frame \ --title "Procmail tips page" \ --author "Jari Aalto" \ --email jari.aalto@poboxes.com \ --meta-keywords "procmail, sendmail, mail, filter, faq, ube" \ --meta-description "Procmail tips page" \ --base http://www.procmail.org/jari \ --document http://www.procmail.org/jari \ --url http://www.procmail.org/jari \ --html-body LANG=en \ --Out \ pm-tips.txt Please also familiarise yourself with unix what(1) and GNU RCS ident(1), if you have those commands in your system. It is important that you mark interesting text to these tools so that someone can get an overview of your supplied files % what FILES - Print @( # ) tags % ident FILES - Print $ $ keywords Sending improvements Because I'm not English speaking, I regret the bad language I may have used in this document. If you have any time, 5-10 minutes to find some spelling mistake or misuse of the English verbs, please go ahead and send me a patch to correct the wording. The preferred way to send corrections to this document is as diff(1) output. Here's how to make corrections send them to me: The diff option -u is only available in GNU diff, please try to send the -u diff if possible. If you don't have -u option, use -c switch. % cp pm-tips.txt pm-tips.txt.orig ... load the pm-tips.txt to your text editor ... edit the file and save ... Print the version number first % what pm-tips.txt > pm-tips.txt.diff # see man what(1) % diff -u -bw pm-tips.txt.orig pm-tips.txt >> pm-tips.txt.diff ...Send content of pm-tips.txt.diff to document maintainer. 1.6 About presented recipes The recipes presented here are collected from the net and procmail archives. I have tried my best to keep the recipes as original as possible, but I have generalised the examples when necessary. If some recipe doesn't work as announced, please a) send note to [jari] b) send email to procmail mailing list and ask how to correct it. I will watch the procmail list and I'll replace any faulty recipe with correct one. Sometimes I have taken the liberty to use a simple dot(.) in regular expressions, where the right, pedantic way would have been to use an escaped dot. If you want to be very strict, you should use the escaped dot where applicable. [free hand version] [pedantic version] :0 :0 * match.this.site * match\.this\.site Procmail also accepts assignments without quotes, like this: var = value num = 1 dir = /var/mail But I have adopted a style, where literal strings are assigned with double quotes: var = "value" because the procmail code checker then won't warn you about missing dollar-sign, which you might have very well forgotten. Emacs fon-lock, a syntax highlighting package also displays double quoted string in color. # If you do this... var = value # then it is in fact not clear what was intended: var = "value" # Did you mean: literal assignment? var = $value # Did you mean: variable assignment? Recipe flags are also _not_ stuck together, because for me the visual distinction of `:0' and `flags' is a valuable one. [Erm, all stuck] [I like this better] :0ABDc: :0 A BDc: 1.7 Variables used in recipes These are part of the procmail module *pm-javar.rc* and are used in recipes. # Pure newline; typical usage: LOG = "$NL message $NL" NL = " " Refer to "improving Space-Tab syndrome" section for more details WSPC = " " # whitespace: space + tab SPC = "[$WSPC]" # Regexp: space + tab SPCL = "($SPC|$)" # whitespace + linefeed: spc/tab/nl NSPC = "[^$WSPC]" # negation s = $SPC # shortname: like perl -- \s d = "[0-9]" # A digit -- Perl \d w = "[0-9a-z_A-Z]" # A word -- Perl \w W = "[^0-9a-z_A-Z]" # A word -- Perl \W a = "[a-zA-Z]" # A word, only alphabetic chars Writing recipes is now a little easier and may look more clear. *$ Header:$s+$d+$s+$d # Matches "Header: 11 12" _SUPREME_ = 9876543210, is the highest score value that causes procmail to bail out. [david] Actually the maximum is 2147483647, but 9876543210 is easier to remember/type and will function just as well. _PMSRC_ = Procmail includerc code directory, where *rc files reside. Anywhere you want it to be: usually $HOME/pm or $HOME/.procmail. Here you keep the procmail files, logfiles and includerc scripts. You can also use the synonym _PMDIR_. _SPOOL_ = Directory where your procmail delivers the categorized messages. Like mailing lists: list.procmail, list.lyx-users, list.emacs, list.elm and work mail: work.announcements, work.lab, work.doc, work.customer and your private message: mail.usenet, mail.private, mail.default, mail.perl and unimportant messages junk.daemon, junk.cron, junk.ube If you read the procmail-delivered files directly, this directory is usually $HOME/Mail or $HOME/mail. If you use some other software that reads these files as mail spool files (like Emacs Gnus), then this directory is typically ~/Mail/spool/ or similar. _MY_XLOOP_ = Used to prevent resending messages that have already been handled. Typically `$LOGNAME@$HOST', but this can be any user chosen string. Make it it unique to your address. In this document the definition is: MY_XLOOP = "X-Loop: $LOGNAME@$HOST" _SENDMAIL_ = Program to deliver composed mail. Usually standard Unix `sendmail', but it must have some switches with it. See man page for more. We use following definition in scripts: SENDMAIL = "sendmail -oi -t" _NICE_ = In a Unix environment you can lower the scheduling priority wth nice(1). If you are conscious of how many external processes you launch for each piece of mail it would be nice to lower the priority of such processes. You may see in this tips file that external processes are called with `NICE' enabled: :0 w # same as nice -10 script.pls | $NICE script.pl _IS_ functions; eg. IS_EXIST is defined as "test -e" and so on. The definition of _IS_ functions are system-dependent. E.g. On Irix the "-e" option is not recognized and the nearest equivalent is "test -r". All _IS_ functions are defined in the `pm-javar.rc' module. 1.8 About "useless use of cat award" Randal Schwartz, a well-known Perl programmer and Perl book writer, started giving emmy rewards for the "useless use of cat command" whenever someone wrote examples without token "<". Like this: % cat file.name.this | wc -l Instead he insisted that the call should have been written like this, which saves the pipe. (Never mind that `wc' can read the file directly; this is an example.) % wc -l < file.name.this I stick my opinion in this soup and you're free to disagree. When you see the shell commands used in this document, they are written so that they can be read from left to right: The "<" is in my opinion difficult to understand. As an example, I think that: % cmd1 < file1 | cmd2 > file2 is less clear than my preferred way of writing such commands: % cat file1 | cmd1 | cmd2 > file2 And now to the purist side: Is saving one pipe process so important? Let me see, I use a 2Meg file in this test: % time sh -c "cat some-file-name-is-here | time wc -l" 0.29u 0.11s 0:00.47 85.1% % time sh -c "wc -l < some-file-name-is-here" 0.27u 0.05s 0:00.39 82.0% There is not much difference, and this 2Meg file is not typical at all. The files typically used are many times smaller. The nitpicking is therefore pointless. Another reason why I use "left to right pipe writing": when you recall the command in csh, you can edit the last command's arguments easily. If you used the "<" token, tapping keyboard is _much_ more tedious (try changing wc command's option above). Oh yeah, you can write like this to get the command to the right, but that's even more obscure. % < some-file-name-is-here wc -l Dallman Ross also mentioned that csh users can replace any word in the previous command by use of caret(^) editing commands, like this: % cat some-file-name-is-here | time wc -l % ^some-file-name-is-here^new-file^ --> cat new-file | time wc -l Ahem, so there, I got it off my chest... 2.0 UBE in Internet 2.1 Terms used and foreword [Part of this has been excerpted from the Email Abuse Faq] ._UBE_ = Unsolicited Bulk Email ._UCE_ = (subset of UBE) Unsolicited Commercial Email _Spam_ = Spam describes a particular kind of Usenet posting (and canned spiced ham), but is now often used to describe many kinds of inappropriate activities, including some email-related events. It is technically incorrect to use "spam" to describe email abuse, although attempting to correct the practice would amount to tilting at windmills. _Spam_ = definition by Erik Beckjord. "Some people decide that Spam is anything you decide you want to ban if you can't handle the intellectual load on a list." Remember, not to be confused with real spam, which is unwanted bulk mail. People are nowadays seeking a cure which will stop or handle UBE. That can be easily done with procmail (under your control) and with sendmail (by your sysadm). In order to select the right strategy against UBE messages, you should read this section and then decide how you will be using your procmail to deal with it. 2.2 UBE strategies [Excerpted from the Email Abuse Faq] 4g. I asked to be "removed" - guess what? I got another U*E Not surprisingly, many UBE outfits treat a "remove" request as evidence that the address is "live"; a "remove" request to some bulk emailers will actually guarantee that they will send more to you. For many others, the remove procedure does not work, either by chance or design. At this point perhaps you're starting to get a feel for the type of people with whom you are dealing. Also, getting removed doesn't keep you from being added the next time they mine for addresses, nor will it get you off other copies of the list that have been sold or traded to others. In summary, there is no evidence of "remove" requests being an effective way to stop UBE. 4h. I asked to be "removed" - guess what? The message bounced Probably the remove procedure was false. Any remove procedure that tells you to send remove requests to AOL, CompuServe, Prodigy, Hotmail, or Juno is certainly false. The bulk emailers are an unpopular lot; they forge headers, inject messages into open SMTP ports, use temporary accounts, and pull other stunts to avoid the tirade of complaints that follow every mailing. 2.3 UBE and bouncing message back Has anyone found that bouncing spam does any good at all? _Note:_ There are several program packages out there that can with a high degree of success (but not 100%) trace back a spam even if some headers are faked. This will not help you against spam houses (which don't care) but will speed you telling the sysadmins of an open relay. Such tools need human interaction for proper working. See pointers to them in this document later. Examine the messages by hand first and feed them to automatic complain script. See pointers in this document later. [sean] I had a whole policy message written up that would be sent out to spammers. Nothing but a waste of my resources. Most return paths are either completely bogus, or end up bouncing pretty damn soon after the spam, which just brings you more junk to deal with. Instead, I choose to send messages occasionally to administrators and upline providers of domains which spew. "Agreement by action" is one of the legal standards I like to use (for "should you continue to send mail to me, that constitutes acceptance of the terms herein"). InterNIC recently 1997-07 removed the root files for .com, .org, and .net (I think) from access at their ftp server. Too many spammers were using them for the purpose of generating mailing lists. Access to the files now requires an assigned FTP account from InterNIC. When I get a domain-style spam, I immediately do a whois to get DNS info on the domain, then grep the root files to obtain a list of domains serviced by the same DNS. If they appear spammy (as spam domains tend to), I add these to a list of domains to filter (egrep) in my primary domain-based ruleset. Works for me, though the list is getting big. [Kimmo Jaskari ] Another good reason is that all those bounces, which get ignored by the spammer/recipient anyway, still take up needless bandwith on the net. The spam is bad enough for that, bouncing it back with some more stuff added is just plain silly. You become part of the problem rather than the solution. If the bounce even gets to the spammer, the spammer drops it on the floor unseen. [1998-11-03 PM-L Mark Shaw ] Jari: "Autoresponder is bad idea. You need more better heuristics than what procmail can do. The UBE messages really need human inspection before you send them out, otherwise you may have to apologise from lot of people eg if the complaint was mistakenly sent off to some mailing list or wrong address." Mark: Having originally set up my anti-spam recipes to be autoresponders, I absolutely agree with this. I recall one morning when my strongly- worded no-spam message went out to *everyone* who sent me email for several hours..... *** shudder *** 2.4 UBE and "I don't mind" attitude ...whenever you see a spam you don't want, hit the delete key and move on. Grow up and get a life, folks. The spams just don't bother me. Why the hell does everyone have to go up in arms everytime someone sends a spam? Spams are harmless! Spams even sometime are interesting and/or useful! [Responses from thread in procmail mailing list 1995-10 to "FREE 1 yr. Magazine" spam.] [Soren Dayton ] The simplest reason against UBE is that it is rude. It costs some people money to get email on some commercial services. This is fundamentally different than junk snail mail for this reason and too much spam can prevent people from getting mail (mailboxes can fill up). So it is both an intrusion into my life _and_ it can conceivably end in me either loosing money or loosing mail (which is far more important). It is a burden on the receiver _far_ beyond just hitting the delete key. [Mark Seiden ] people who are able to monitor the incoming machines of one of the larger online services (like me) can see a sizeable increase in system load average and volume directly resulting from spams. this competition for fixed resources inevitably translates to reduced service for "first class" mail. It is impossible to engineer a mail system that can cope with an unlimited amount of abuse. this is in addition to the difficulties of doing so on a fixed price economic model, and the difficulties of keeping up with the successful rapid expansion of the population to be served. Even if you, an individual, aren't charged anything per piece of mail, there are costs borne by your service provider per piece of mail, and these are *somehow* passed on to you. (They've calculated an average across their entire user population to come up with a "monthly cost of Internet mail".) Spamsters and bulk mailers are not at all concerned about efficiency. as proof of that, many of them are not even courteous enough to supply a proper return address, so they can prune their lists of undeliverable mail. all they care about is getting their message across without their paying anything whatsoever for that service. Watch how this will inevitably translate into increased costs for you, the consumer, unless we change the mechanisms by which bulk mail is delivered as well as putting an appropriate economic model in place. [Steve Simmons ] If you tolerate spamming, it will only get worse. Spamming has been stopped again and again. Almost without exception, the spammers have been tracked down and, via one means or another, have been convinced to stop spamming. Spams are harmless? I've already seen the 'Magazine Sub' message 10 or 12 times. I have a low bandwidth line. If I continue to tolerate spamming, I will pay a very real penalty in performance as tens, then thousands of spammers do it. Not to mention the personal time involved in taking care of the crap. Don't think that the time involved is significant? Just wait. My wife and I are fairly generous with our time and money. As a result, we were getting an average of five telephone calls *per night* asking for money for various causes. A year ago, I adopted a new policy -- I will not under any circumstances give money to a caller, and will only consider it upon written solicitation. I ask them to put me on their `do not call list'. If they do *anything else* to continue the conversation, I hang up on them. My wife opposed this, and we agreed to disagree -- if they ask for her, they get her. If they ask for me, they get my speech. After a year, she is getting 2-3 calls per night and I'm getting one or two a week. My point here is that individual action *does* get re-action from the mailers. For them, I copy their internet providers on my complaints and call their Better Business Bureau. It works. If one does this politely and consistently, 98% of the spammers will stop. The remaining 2% will discover that they're in a different world from direct mail or telephone solicitation. Their mailboxes will be overloaded with complaints (when it takes a single keystroke to invoke your complain macro, you're very likely to complain). Then their suppliers mailboxes will be overloaded with complaints. The free magazine folks, who've been hiding behind false ids and forging mail, will find that they're on the wrong side of the law. I'm considering contacting their local legal officials and urging them to investigate, because it sure looks like fraud to me (read `Consumer Reports' for a similar case by surface mail). Should a few more like this come in, I *will* contact their legal authorities. We have their fax number; it's all we need to find them. [Carl Payne ] Um, I don't know about you or anyone else here, but this cutesy, "it's-okay-by-me" spam has been circulated under half a dozen different user names and "domains" on as many mailing lists. It's obvious to me the sender is trying to make people pissed off--how can he possibly think someone will buy that crap, and why does he think it's okay to send 19 and 20K files over a billion groups? AFAIC, it has to stop. Now. I'm tired of the spam, I'm tired of the "Who cares" attitude about spam, I'm tired of ISPs letting people spam, I'm tired of the jetwash of spam, and I'm tired of the bleedinghearts that say, "Golly, just ignore it, and it'll go away." I've got news for you all: when this method of spamming becomes the preferred method of "marketing" on the internet, and people like us are the bad guys because we're not allowing such litter to fly across the fiber, you will care. You will say something, most probably, "Why didn't we do something about this sooner?" The guy in the next cube from you, who's paying a per-message charge through his ISP, is probably going, "Dammit, over three dollars this month on mail I've itemized as being spam." While that doesn't seem like a lot, I revert to my earlier statement: if this becomes the preferred method, his bill (and yours) will go up, and everyone will wonder why it's too out of control to do anything about. Spam has the letters *m-a-s* in it, which en Espanol, means "more." I say no. Not only no, but hell no. And, I refuse to be told that my thinking is out of line just because I don't want my mailbox flooded. Do something now. Do anything now. But, don't be quiet and listen to anything that sounds like an endorsement of litter [Wolfgang Weisselberg ] Worse is that it costs a spammer very little to spam, say, 2 million addresses with 5KB: o 5 hours unattended time online o phone costs o a 'free x hours'-CD or a provider looking the othher way i.e. something between $0 and $500 (an expensive provider) It costs all recipients: o on an average of 5 seconds per UCE to decide that, indeed, it is one: 115.7 *DAYS* (2777.8 hours) of mailchecking (at $7.5/h that is just $20833 --- excluding all taxes and so on!) o 379.5 hours (15.8 days) download time (multiply with your local phone costs and remember that in most places even in-city calls cost by the minute) o the same time as online time (multiply by your provider costs) o indirect costs (more HDs for the provider (9.5 GB), faster connections for all the spams, more transmission costs (9.5 GB), faster machines, ... I can send you the complete calculation if you like :-) Now, if UCE becomes more common ... how many businesses are connected to the Internet? Say that every business spamms once every 10 years, and that they are well distributed over the time. Number_of_businesses / 3650 = UCE's iniciated per day UCE's iniciated per day * 2_000_000 (or more) / number of email addresses = UCEs in your mailbox Guess we are going to need T1's to just get all our mail. And a few 100 secretaries as well. Wave good-bye to usable email. 2.5 We need a law against UBE Ray Everett-Church , Attorney/Online Consultant Co-Founder & Congressional Liaison Coalition Against Unsolicited Commercial Email; article 1997-12 in remailer politics mailing list In developing what eventually became the Smith Bill, CAUCE discussed this rather extensively among our drafting committee. The bill gives a cause of action against the advertiser, not any of the pathways taken between you and them. This is consistent with the interpretation of the fax law (and many other laws for that matter) wherein the advertiser -- not the advertiser's agent -- is responsible for the act committed. As for the single UCE versus bulk issue, the general consensus has been that while a single piece of spam does not do much damage, it is fundamentally no less a cost shift than 10 identical messages, or 100, or 1000, or a million. The only difference is that the costs being shifted are greater and greater. We discussed many cut off points... would 50 spams be acceptable? 25? 10? One really well crafted, hand written, heartfelt and personalized spam be permissible? And in the end we felt like we were discussion angels on the heads of pins. While virtually nobody's system will crash because of one piece of spam (although George Nemeyer had trouble with three or four pieces as I recall), what is the ultimate difference if you only get one piece from each of 15 different advertisers a day? If one spam is ok, but two are bad, what is the interval... a day, a week? Enforcement depends on knowing when the threshold is crossed. So here's a scenario: you receive three spams from what is, unbeknownst to you, the same person (one advertising weightloss pills from WeightLoss Associates at PO Box 1, one for an MLM from MLM Company at PO Box 2, and Bee Pollen from Pollen Partnership at PO Box 3). Each were individually crafted and appeared to be mailed only to you. Under the scenario above, if the law permits one spam, will you sue? Would you risk suing one or all of them, gambling that they sent the spam to anyone other than you (or whatever the threshold is... 10, 25, 50)? Would you risk suing one or all of them on the chance that they were somehow related? What if there was a chance that you'd find out that the three companies were really different? What if you did sue and found that they were owned by the same person, but were legally organized separate entities and were therefore each entitled to one spam a piece? In short... if one spam is permitted, it could make enforcement incredibly cumbersome, difficult and unlikely, and would present spammers with many reasons to violate the law knowing the odds of a suit and successful enforcement are greatly reduced. While bulk spam is really bad on many levels, whether it's parsed out in very small volumes makes little or no difference to the ultimate recipients as far as the diminished utility, cost, and annoyance. We need a clear, bright line. And the Smith Bill is that. 3.0 Anti-UBE pointers 3.1 NoCEM, CAUCE and others "NoCEM" http://www.cm.org/ "Dougal's NoCeM-E" http://advicom.net/~dougal/antispam/ ... Dougal is sysadm for an ISP. His page has wealth of information about Anti-SPAM Tools. You also find his mailing list for NoCeM-E. "The Coalition Against Unsolicited Commercial Email (CAUCE)" http://www.cauce.org/faq.html ...The Problem: Unsolicited commercial email, more commonly known as "spam", is a growing problem on the Internet. If you've used the Internet for any length of time, you've probably received solicitations via email to purchase products or services. A Solution: A group of Internet users who are fed up with spam have formed a coalition whose purpose is to amend 47 USC 227, the section of U.S. law that bans "junk faxing", so that it will cover electronic mail as well. "Teergrubing against Spam" http://www.iks-jena.de/mitarb/lutz/usenet/teergrube.en.html ...`Teergrubing' It's German and means Tar-Pit. Once you have been stuck you can't get out. ...slow down internet connections in order to stop UBE abuse. Several hundred teergrubes are able to block spamming worldwide without blocking any e-mail. How do I start: If you are the admin of a MX host, install a teergrube. "Obtuse smtpd for UNIX" http://www.obtuse.com/smtpd.html Main (configurable) features: o deny unauthorized relay (no more relay rape!) o permit selective relay exceptions (eg. UUCP downstream) o regex() filtering [block those spamming dialins!] o deny access for no MX, no PTR, etc. o defeat % hack o support MAPS, ORBS, DUL, IMRSS, etc RBLs plus your local RBL o support exception list for domains for which you will accept mail o support selective tarpit'ing on refused connections o individually configurable rejection messages o precedence and override ordering o informative log summary scripts "Lot of good articles about spam" http://www.sun.com/sunworldonline/swol-12-1997/swol-12-spam.html "(anti-spam Law) US Representative Chris Smith's statement on junk e-mail" http://www.sun.com/sunworldonline/swol-08-1997/swol-08-junkemail.html ...considerable variation in the approaches at the federal level, and state legislation varies widely as well. Professor David Sorkin of John Marshall Law School, who summarized and provided links to the major spam-related lawsuits noted above, also provides status summaries and links to state and federal legislation "Select email court cases -- Lots of them" http://www.jmls.edu/cyber/cases/spam.html America Online, Inc. v. Cyber Promotions, Inc., Compuserve Inc. v. Cyber Promotions, Inc., etc. "Anti-Spam Directory of Information and Resources" http://www.ao.net/waytosuccess/nospam.html "FREE - The Forum for Responsible and Ethical E-mail" http://www.spamfree.org/ "Ethical Marketing Using FREE Resources" http://www.ao.net/waytosuccess/index.html 3.2 General Filtering pages (more than procmail) "Nancy McGough - Mail Filtering FAQ" http://ssil.uoregon.edu/~trenton/autopage/page7547.html http://www.ii.com/internet/faqs/launchers/mail/filtering-faq/ "Information Filtering Resources" http://www.ee.umd.edu/medlab/filter/ Doug Oard ...This page lists all known internet-accessible information filtering resources. 3.3 Junk email and spam "Spam FAQ" ftp://rtfm.mit.edu/pub/usenet/alt.spam/ http://www.cs.ruu.nl/wais/html/na-dir/net-abuse-faq/spam-faq.html "The email abuse FAQ" http://members.aol.com/emailfaq/emailfaq.html What is UBE, UCE, EMP, MMF, MLM, Spam, it is all explained here. "Get that spammer -- A VERY GOOD LINK" http://kryten.eng.monash.edu.au/gspam.html ...All about Spam; traceroute, netabuse etc. Full of links and docs "Whois" http://www.networksolutions.com/cgi-bin/whois/whois/ "Advertising on Usenet: How To Do It, How Not To Do It" ftp://rtfm.mit.edu/pub/usenet/advertising/ "Dealing with Junk Email" http://www.mcs.com/~jcr/junkemaildeal.html ...What you should do (and not do) when you have been victimized by a junk emailer. This document teaches you how to read headers in order to trace the origin of junk email, and includes detailed examples to show you how it is done. Headers are designed for computers to read, not people, so they can be a little hard to follow. Therefore, I hereby grant permission to print or electronically save a copy of this page on your local machine for your personal use while tracing junk email. Please check back for updates and corrections, though. o What Not To Do: Stuff that doesn't work o What to do: effective techniques, including how to trace junk email back to its source o Stay Calm (take a deep breath...) o Stay Mad (don't get discouraged) o How to identify the sender and who gives them Internet access o Who to complain to, abuse addresses, online services o What to say and how to say it, effective complaining "How to fight back." http://www.oeonline.com/~edog/spamstop.html o Look at the header of the advertising message. Find the "Message-ID" line. (You might have to tell your e-mail program to display this.) o The words after the @ sign are the sender's real--not faked--Internet Service Provider, or ISP. (Spammers often try to disguise their address, but the Message-ID is a good clue.) o Write a complaint to the postmaster of that ISP, similar to the one below. (If the ISP is junkmail.com, then let postmaster@junkmail.com hear from you.) "Practical Tools to Boycott Spam" http://spam.abuse.net/spam/ ...We have been actively engaged in fighting spam for years. Recent events, including pending court battles, prompt us to present this page to the public. Fight spam to keep the Internet useful for everyone. o Filtering mail to your personal account o Blocking spam email for an entire site o Blocking Usenet spam for an entire site o Blocking IP connectivity from spam sites o Other tools and techniques for limiting spam o Sample Acceptable Use Policy statements for ISPs "Spam -- stop that!" http://com.primenet.com/spamking/buyerbeware.html "The Campaign to stop junk email web site" http://www.mcs.com/~jcr/junkmail.html ...we will attempt to teach victims and potential victims (that's everyone with an email address) the most effective methods of prevention and retribution. "news.admin.net-abuse.* Homepage" Timothy M. Skirvin http://www.ews.uiuc.edu/~tskirvin/home/nana/ "The automated spamhandler beta information heap." http://www.halcyon.com/natew/ "Preventing relaying in Sendmail" ...This package adds two independent features to sendmail, access control and relay control. They will be described here simultaneously, but you can elect to include support for only one of them (either one) on your mail server. Access control lets you deny access to the server based on the senders envelope address or his IP address. Relay control lets you decide who gets to relay email through your server. ftp://ftp.xyzzy.no/sendmail/access.tar.Z "Anti-Spam Provisions in Sendmail 8.8" http://www.sendmail.org/antispam.html http://mail-abuse.org/ http://www.informatik.uni-kiel.de/%7Eca/email/check.html#check_rcpt o Preventing relaying through your SMTP port o Refuse mail from selected hosts o Restrict mail acceptance from certain users to avoid mailbombing [1998-06-15 PM-L walter] Somebody's starting to exploit a hole in sendmail 8.8, where giving a HELO longer than 1024 bytes causes buffer overflow, and all following "Received:" headers are lost. If it's done off a relay, we have no clue who sent it. There may be a more elegant solution, but here's a quick-n-dirty procmail filter for this stunt... "Blocking Email" http://www.nepean.uws.edu.au/users/david/pe/blockmail.html o Do you or your users, receive "junk email" (aka., "spam") o Do you have Sendmail R8.8.5 running at your site? o Would you like to block known "junk email" senders' addresses? Now you can - and there's no need to patch any source code, either. Take advantage of Sendmail's check_mail rule, to see if the sender's address is a member of a nominated "class" - drawn from the contents of the named file. Additional information and links: o Prospective Addresses/Domains to Block o Limiting Unsolicited Commercial Email o EFF "Net Abuse and Spamming" Archive o [U.S.] Court Lets AOL Block Email o Anti-Spam HOWTO o Net Abuse FAQ o Figuring out Fake Email & Posts o Fight Unwanted Email o Unsolicited Junk Email - Bad for Business o Fight Unsolicited Email and Mailing o Yahoo's Junk Email Resources o jmfilter o Complaints Addresses at U.S. ISPs o news.admin.net-abuse.* Homepage o Processing Mail With ProcMail o Panix's rc.shared ProcMail Configuration o ProcMail Workshop o Email Self Defence o The SPAM-L mailing list "Preventing relaying in Netscape Messaging Server" http://www.tsc.com/~bobp/nms-no-relay.html ...discusses anti-spam configurations for Netscape Messaging Server (NMS). These include proper anti-relay config, spam filters, and using blacklists such as MAPS from NMS. I was compelled to compile this page because of the extremely poor Netscape documentation which includes anti-relay configurations that are easily defeated. --Bob Poortinga "US Federal Trade Commission" http://www.ftc.gov/ ...staff publicized the Commission's UCE mailbox, "uce@ftc.gov," and invited consumers to forward their UCE to it. spam complaints "Spam Spade Web based tracking tool" http://www.blighty.com/ ...Figuring out forged headers and verifying IP addresses and whois information. "Misc" http://www.junkbusters.com/ http://www.well.com/~jbremson/spam http://www.wolfenet.com/~jhardin/procmail-security.html 3.4 Comprehensive list of spammers "Against Spam -- The garbage collecting." http://www.spam-archive.org/ To support this archive please forward email spam to . Everybody is invited to bounce Mail-Spam he/she has got to this list. This is a mailing list to distribute actual spam-eMail. All incoming mail will be checked by subject and from/sender-address wether it has already been distributed or not. No discussions in this list. To discuss about this list please subscribe to . To subscribe to _blacklist-update_ mailing list TO: BODY: subscribe blacklist-update you@somewhere.com Mail to discuss about blacklist if your name is on it. (maintained by Axel Zinser ) Get the updated blacklist from ftp://ftp.spam-archive.org/spam/blacklist/ 3.5 Misc pointers Is there a way to block local users from spamming other sites? Maybe somehow force sentmail to read a rc file that would maybe then grab the from field and see if the user exists on the system or not. Or run it through some sort of filters. [philip] You can and should do this purely in sendmail. I ended up crafting a check_from ruleset that verifies that the envelope sender address is either a) not local; b) a local user; or c) a local alias. At the time I did this mainly to force people to configure their Eudora clients so they didn't say "Return Address: yourname@gac.edu" but it also covers the outgoing bogus source address spam case. For those interested in this kinda thing I've (just) put it up for FTP: ftp://ftp.gac.edu/pub/guenther/ "IBM's Secure Mailer -- open source" http://www.postfix.org/ [1998-12-15 PM-L Matthew McGehrin ] The official project is known as 'IBM's Secure Mailer'. The unofficial codename was Vmailer, but they had to rename that, to Postfix to agree with the lawyers. I should know, I have been alpha testing this mailer for the past year, and it so blazing fast, its amazing. It's faster and simplier to use than sendmail, and also faster and more secure than qmail. It works fine with procmail. (look in my headers). set "mailbox_command=/usr/bin/procmail" in /etc/postfix/main.cf [1998-12-15 PM-L Liviu Daia ] it has explicit hooks for both procmail and RBL. In fact it's incredibly easy to setup, I got it compiled and configured (with an actually usable configuration) in about 15 minutes after downloading it. Adding masquerading and a virtual domain took another 2 minutes. :-) You should really give it a try, it's faster than QMail and _much_ faster than sendmail. So far, I'm quite impressed. "Qmail" http://pobox.com/~djb/qmail.html http://www.qmail.org/ "Sendmail" http://www.sendmail.org/ "Fetchmail -- old pop3 replacement" ftp://ftp.ccil.org/pub/esr/ http://www.ccil.org/~esr/ http://www.tuxedo.org/~esr/fetchmail/ "Maildrop filter utility" http://www.geocities.com/SiliconValley/Peaks/5799/maildrop.README.html ...Alternative to procmail "Lua" http://www.tecgraf.puc-rio.br/lua/ [possible replacement for procmail language] ... *Lua* is a programming language originally designed for extending applications, but also frequently used as a general-purpose, stand-alone language. Lua combines simple procedural syntax (similar to Pascal) with powerful data description constructs based on associative arrays and extensible semantics. Lua is dynamically typed, interpreted from bytecodes, and has automatic memory management with garbage collection, making it ideal for configuration, scripting, and rapid prototyping. 3.6 Questionable UBE stop services "IEMMC: Internet E-Mail Marketing Council Formed 1997-03" The IEMMC was formed to provide an industry wide trade association for the purpose of promoting responsible e-mail marketing, and to establish an industry standard code of procedures and ethics which will internally regulate and govern the commercial e-mail marketing industry....Under this system, all e-mail of a commercial, unsolicited nature must pass through a universal filtration system which will block the sending of any and all commercial e-mail to the address on the list. Bulk e-mailers will be required to join the organization Others have commented that: ...IEMMC is a joke. you are probably not doing yourself any favors ...Don't take that IEMMC seriously! Many people registered with them and got as many or even more spam as before. After all, Cyberpromo (the operator of IEMMC) knows that the registered addresses will be valid for some time, so they can use and sell this valuable list to other junk mailers. "Spammer blacklist" http://www.netchem.com ... Dear Sir/Madam, Your email address may be on many spammers' lists. We are compiling a *remove* list. Forward the original junk to "No Junk E-Mail database" http://pages.ripco.com:8080/~glr/nojunk.html ...We will help stop unwanted email to you..the list is submitted to us, and those addresses that appear in the "do not mail" list are removed and the "cleaned" list is returned 3.7 UBE related newsgroups or mailing lists alt.kill.spammers alt.hackers.malicous alt.2600 [1997-08-13 alt.privacy.anon-server by anonymous poster] Proper etiquette demands you contact their ISP. However, if the ISP are not interested in helping you, you should consider a posting in alt.kill.spammers (or even alt.hackers.malicous or alt.2600) - give as many details as you can about the spammer. A certain spam-provider targeted the alt.hackers.malicious newsgroup. Not the most sensible thing to do. The ISPs IPs were found, their MX host was hacked. All their DNS entries was published on alt.2600 (so that everyone could add filters to ignore all mail from this company). Oh yeah, their password file also made it to the group! The ISP then posted a complaint to alt.2600, much to the enjoyment of everyone who took part. That host basically died a horrible death. I'm pretty sure that not many people are going to lose any sleep over this! I might as well mention that the ISP's complaint mentioned that their "freedom" was being abused. hehehe. Most of these postings can be seen in dejanews or altavista archives of usenet. "SPAM-L mailing list and Doug Muth's Page" http://www.claws-and-paws.com/spam-l/ ... "The SPAM-L FAQ" - A FAQ for SPAM-L, an anti-spam mailing list. This FAQ discusses how to join the list and what to post there, AND it also delves into the technical aspects of spam. For instance, the various kinds of forgeries seen in spams are discussed here, along with information on how to recognise them. If you hate spam, this is something worth checking out... "TheGoodsites List" - I maintain this list, which is part of the Spam Boycott, to show which Internet providers out there act responsibly when dealing with spam. If you're looking for an ISP and want to know where they stand on spam, this is the list for you. Send an email message to with the words "subscribe SPAM-L " in the body of the message (no quotes). f you would like to contact the owner, the convention is the same as with all listserv lists. Just send e-mail to 3.8 Software: the net abuse page Scott Hazen Mueller http://spam.abuse.net/spam/tools/ 3.9 Software: adcomplain -- Perl junk email rport http://www.rdrop.com/users/billmc/adcomplain.html Adcomplain runs under Unix, Windows-NT, and Windows-95. Adcomplain is a tool for reporting inappropriate commercial e-mail and usenet postings, as well as chain letters and "make money fast" postings. It automatically analyzes the message, composes an abuse report, and mails the report to the offender's internet service provider. The report is displayed for your approval prior to mailing. Adcomplain can be invoked from the command line or automatically from many news and mail readers. #todo: url missing [a user happy user reports] ...About 95% of all cases can be traced correctly --- unless they come from a known spamhouse; where complaining to them would not do much good anyway. Mailing lists with strange Received-Headers also can present problems in tracing 3.10 Software: Ricochet -- Perl junk email rport http://www.vipul.net/ricochet/ Vipul Ved Prakash MailingList: with subject "subscribe" A lot of unsolicited email goes unreported because tracing the origins of a possibly forged mail and finding the right people to report to is complicated and time-consuming. Ricochet, a smart net agent, automates this process. It traces the names and add resses of the systems where the spam originated from along with the servers that provide domain name resolution services to these systems (in most cases their ISPs). Then it collects/generates a list of email addresses of tech/billing/admin/abuse contacts of these system and mails them a complaint and a copy of the spam. Detailed description of its workings can be found in the README file that comes with the package. 3.11 Software: yell -- perl ftp://ftp.netcom.com/pub/bo/bobmacd/yell (57k) Bob MacDowell yell - auto-responds to "spam" e-mail. Scans for site names, e-mail addresses and Web site names and sends appropriate messages to users, postmasters and Webmasters. 3.12 Software: ifile - Perl http://www.cs.cmu.edu/~jr6b/ifile/ Jason Daniel Rennie ...ifile is different from other mail filtering programs in three major ways: 1) ifile does not require you to generate a set of rules in order to successfully filter mail 2) ifile uses the entire content of messages for filtering purposes 3) ifile learns as you move incorrectly filtered messages to new mailboxes ifile is not dependent upon any specific mail system and should be adaptable to any mail system which allows an outside program to perform mail filtering. Currently, ifile has been adapted to the MH and EXMH mail systems. 3.13 Software: RBL lookup tool -- C [1997-12-04 PM-L Edward S. Marshall ] ...rblcheck is a lightweight C program for doing checks against Paul Vixie's Blackhole List. It works well in conjunction with Procmail for filtering unwanted bulk email (under QMail, for example, you can invoke it with the value of the environment variable TCPREMOTEIP). rblcheck is extremely simple: % rblcheck 1.2.3.4 where 1.2.3.4 is the IP address you want to check. This is a quick note to announce the availability of a new tool for using Paul Vixie's RBL blacklist (see http://mail-abuse.org/ for more information about the blacklist itself, if you don't already know). Most tools which use the blacklist block email on a site-wide basis. For many networks, this treads on both the ideals of the administration, and on the perceived freedoms of the end user. Personally, I don't care either way. :-) This tool was to fill the need I personally had to reject mail, since one of the systems I receive mail through cannot, for various political reasons, implement the available RBL filters on a site-wide basis. rblcheck is a simple tool meant to be used from procmail and other personal filtering systems under UNIX in the absence of a site-wide filter, as an alternative to imposing site-wide restrictions, or as a means of imposing restrictions on systems that cannot support the existing RBL filter patches. Simply put: you hand it an IP address, and it determines if the IP is in the RBL filter, providing the caller with a positive or negative response. With the package, a sample procmail recipe is provided, and examples of using it under QMail and Sendmail are given. .http://mail-abuse.org/ .http://www.isc.org/bind.html The official home page .http://www.xnet.com/~emarshal/rblcheck/ It has only been tested under Linux 2.x and Solaris 2.5.1. Success stories, patches, questions, suggestions, and flames can be directed to me at . [PM-L Aaron Schrab ] Here is my rbl setup, but, this depends both upon the format of the Received: lines, and the way that mail passes through your mail system. I currently grab the IP address from the first Received: header inserted by my ISP (I'm a sysadmin at the ISP, so I have a good knowledge of how mail gets passed around internally). Here's the recipe that I use. # if there's a Received: header from one of these servers, it's # (probably) the right one BACKUPSERVER = "([yz]\.mx\.execpc\.com)" VIRTSERVER = "(vm[0-9]+\.mx\.execpc\.com)" LOCALSERVER = "([abc]\.mx\.execpc\.com)" # Match a header containing: # Received: []) by :0 * $ $SUPREME^0 ^Received:.*\[\/[0-9.]+\]\)$s+by$s+${BACKUPSERVER} * $ $SUPREME^0 ^Received:.*\[\/[0-9.]+\]\)$s+by$s+${VIRTSERVER} * $ $SUPREME^0 ^Received:.*\[\/[0-9.]+\]\)$s+by$s+${LOCALSERVER} { IP = $MATCH # trim it down to just the IP address :0 * IP ?? ^^\/[0-9.]+ { IP = $MATCH :0 W * ! ? /home/aarons/bin/rblcheck -q $IP { SPAM = "$SPAM $IP is rbl'd$NL" } } } It seems to be a procmail issue with letting the IP info from sendmail pass through to the rblcheck program. I have not been able to find anyone using rblcheck successfully with procmail as a delivery agent... [1998-03-26 PM-L Edward S. Marshall ] This is a standard problem; you should be able to change the invocation of procmail the same way as the example (run env, which in turn runs procmail). Make sure that there is a '-p' argument passed to procmail; this preserves the environment you're constructing with env (newer sendmail revisions sanitize the environment for you, so that's not really an issue). If you're still having troubles, make sure you're using the latest incarnation of rblcheck, with the latest supplied procmail recipe; earlier revisions had rather insidious bugs. [1998-03-26 PM-L Xavier Beaudouin (kiwi) ] Also it seems that sendmail 8.9.0Beta3 has builtin rules. I use it with sendmail 8.8.8 and tcpwrapper every day and there is about 80% spam rejected. Sounds very good. In your /etc/hosts.allow just add the following lines : sendmail: ALL: spawn /usr/local/bin/rblcheck -q %a && \ exec /usr/sbin/sendmail -bs || /bin/echo \\ "469 Connection refused. You are in my Black List !!!\r\b\r\n" && \ (safe_finger -l @%h 2>&1 | /bin/mail -s "%d-%h %u" root) In your /etc/inetd.conf just add this line : smtp stream tcp nowait root /usr/sbin/tcpd \ /usr/sbin/sendmail -bs And check that your sendmail is _not_ working as a daemon. That's all. Also if you have huge queue you can add a /usr/sbin/sendmail -q in the root crontab... This should help to send some waiting messages. I think we can use this to wait for official 8.9.0 sendmail since there is some cf/feature/rbl.m4 there. [timothy] ...I think there's a much more efficient way to do this: you can compile sendmail -DTCPWRAPPERS and let it run as a daemon 3.14 Software: mapSoN Note: You can do exactly the same as below with procmail with one of the listed procmail modules: pm-jacookie.rc. See the code. "mapSoN (NoSpam backwards) -- The no spam utility" http://mapson.gmd.de/ ftp://ftp.gmd.de/gmd/mapson/ Most spam filtering tools I've seen so far are based on procmail, or a similar tool, and use a list of keywords or addresses to drop unwanted junk mail. While this might be nice to filter mail from known spam domains like "cyberpromo.com", it won't catch faked headers. mapSoN must be installed as filter program for your incoming mail, usually by adding an appropriate entry to your $HOME/.forward file. This means that mapSoN will get all your incoming mail and it will decide whether or not to actually deliver it to your mailbox. o First of all, an user defined ruleset is checked against the mail. If any keywords or patterns match, the mail will be dealt with according to your wishes. This is useful to drop some sender's mail completely, or to sort mail into different mail folders. o If no rule matches the mail, mapSoN will check whether the mail is a reply to an e-mail you sent, or whether it is a reply to a USENET posting of yours. If it is, the mail will always be delivered. o If no signs of a reply-mail can be found, mapSoN will check whether the sender stated in the From: header has sent you mail before. If he has, the mail will pass. If this is the first time you receive an e-mail from this address, though, mapSoN will delay the delivery of the mail and spool it in your home directory. Then it will send a short notice to the address the mail comes from, which may look like this: From: Peter Simons To: never_mailed@me.before Subject: [mapSoN] Request for Confirmation mapSoN-Confirm-Cookie: The person who tried to contact you will then reply to this "request for confirmation", citing the cookie stated in the mail. When your mapSoN receives this confirmation mail, it will deliver the spooled mail into your folder. Furthermore, the address will be added to the database, so that mail from this person will pass directly in future. If no confirmation mail arrives within a certain time, mapSoN can either delete the spooled mails, or send them to a special folder, or whatever you prefer. 3.15 Software: spamgard [similar to MapSon] ftp://ftp.netcom.com/pub/wj/wje/release/sg-howto ...sppamgard(tm) screens from your e-mail unsolicited bulk mail. It does this in a way that you only have to change things if you have a new person from whom you _do_ want to receive mail; you don't have to change things every time a spamster thinks of a new trick to pull, or a new spamster comes along. And spamgard(tm) is designed so that those who aren't in your "Good Guys" list can get mail to you anyway until you put them there. The instructions for them to get mail to you are simple and newbie-tested, but will still keep out bulk mail. If you're on a mailing list you _want_ to be on, there are provisions for accepting all mail from a set of mailing lists that you specify. 3.16 Software: Spam Be Gone "Spam Be Gone" http://www.internz.com/SpamBeGone/ ...uses machine learning and artificial intelligence technologies to examine incoming mail messages and determine their priority... is more than just a Spam filter, it's a general purpose mail message prioritiser. You train the system, telling it which are good, and which are bad messages. As Spam Be Gone! learns it becomes customised for each individual user. PM-L W. Wesley Groleau comments: .> They only distribute binaries, and I'm paranoid. Anyone able to .> convince me it's not really a Trojan Horse to collect addresses of .> spam-haters or something even worse? I did some sleuthing. I am 95% convinced that SpamBeGone is not a front or cover for any spammer(s). To protect the author's privacy, I won't say why I'm convinced or how I got the info. Sorry. If you're paranoid like me, you'll have to do your own sleuthing before you use it. I'm also convinced SpamBeGone's theory is sound. I won't judge the implementation until I've used it for a while. PM-L R Lindberg & E Winnie comments: I have to agree with the recent comments about Spam Be Gone, I found it tends to be inaccurate. I first set it up about a week ago, followed the directions and trained it on several (15 to 20) messages. One from each list we get, and the remainder from my logs of SPAM messages. The first day it missed about half the SPAM, and nailed about 1/3 of the real messages. So I tuned the key-words a bit, trained it on about 100 more SPAMs and trained it on all the good messages it nailed. Since then it has nailed every SPAM received, however the second day it nailed about 20% of the good messages, which I then trained it to like. Since then it has been nailing about 10% of the good messages, despite continual training. I also added every list to the address book, and it still nails posts from this list, and my wife's lace list. I even went through my entire log of SPAM and trained it on every one that didn't come out a 5 (bad). Being the kind of person I am, I also checked after I trained it, and found four SPAMs, the despite my training it that they were bad (5) came out as not so bad (4). I don't dare kill 4's as far too much of my mail (like this list) ends up as 4's. For me, this program is not ready for prime time. If the comments are correct that it only learns on Subject and From headers, it's not even worth trying. Since lists use the TO and CC headers to be identified, and there are several excellent other headers (X-Advertisement comes to mind) that would be assests for killing SPAM. 3.17 Software: ClearMail http://www.clearmail.com/ 1998-08-27 Scott R Carter ClearMail offers individuals some very strong control over spam through a quite unique concept. The software includes Procmail, Perl and C code. System Requirements include: ClearMail helps to control spam by allowing a user to classify e-mail as high or low priority based on an Address Book or "White List" of known senders. Unknown senders can also send high priority mail by including a special Mail Key (token) in their message (initial message from unknown sender without valid Key results in a bounceback message with instructions). What makes ClearMail different from similar concepts is that spammers are not able to easily obtain the Mail Key to bypass the ` system because it is conveyed as an image. o Unix operating system o Shell accounts for users o Individual .forward, .procmailrc files o Sendmail o Procmail o Perl o Public Web server 3.18 Software: TinyGnus - Emacs Gnus plug-in http://poboxes.com/jari.aalto/ema-tiny.html Platform: win32 and Unix Emacs versions. *TinyGnus* Is Emacs lisp extension package that integrated directly to Gnus mail/newsreaders. It includes simple but efective UBE fighting hotkeys that make it possible to complain bunch of UBE messages a once. Features: o USER MUST DECIDE WHICH IS *ube* MAIL. o User selects messages that are ube with Gnus select commands. o Hotkey C-c ' u examines messages' headers and runs `nslookup' for each Received header to determine *abuse* *spam* and *postmaster* addresses where to send the complaint. 4.0 Procmail pointers 4.1 Where to get procmail binary ftp://ftp.informatik.rwth-aachen.de/pub/packages/procmail/ On-Line manual: http://www.voicenet.com/~dfma/intro.html 4.2 Where is procmail developed Philip Guenther is currently taking care of and coordinating procmail bug fixes. Please send any procmail bugs to the mailing list or to . The development mailing list is running SmarList at . Further patch and bug info can be found at: http://www.gac.edu/~guenther/procmail/todo.html http://www.gac.edu/~guenther/procmail/warts.html Newest Procmail code: http://www.procmail.org/ ftp://ftp.procmail.org/ 4.3 About procmail's Y2K compliance Please consult Philip Guenther for more up to date details. Philip is the Procmail maintainer currently. [1998-09-23 Bennett Todd in Message-Id: <19980923164230.C30594@fcmc.com>] Well, from a simple ogle of the grep over the sources, it looks like there may be a Y2038 problem in the autoconf test code: unsigned otimet = time(). And another, possibly less likely to express itself, in formail.c: unsigned long h1 = time(). Those could express themselves when 32-bit signed time_t wraps; long before then the time_t define should have been changed to something that is bigger, even if it's "long long". The above type-mixes may fail to profit from a suitably redefined time_t, and so may overflow on 2038. I don't see any Y2K problems, though. And email headers use four-digit years pretty consistently, so that should all be cool. This estimation doesn't constitute an in-depth Y2k audit of procmail, but the source code to procmail is ... kinda dense for in-depth auditing. [1998-09-25 Bennett Todd Message-Id: <19980925093902.B12428@fcmc.com>] As I see it there are at least three measures that a whole email system, taken in aggregate, could use for Y2K checking. First, capture a vast cross-section of traffic and make sure no email software is using 2-digit years. I don't recall having seen any, but it's still worth checking. Second, generate a load of traffic with 2000 and 2001 dates and shove it through all the channels. And third, run all the systems end-to-end with their system clocks rolling over the millenium. 4.4 Procmail mailing lists Traffic in this list is about 5-20 messages per day. Do not join if you can't handle that much traffic. The list is run by SmartList, which is a procmail-based list management and distribution package. ._MailingList_: questions/answers .subscription requests .digest request To get off the procmail mailing list To get off the list: send a message to *procmail-request* with: unsubscribe user@domain in the subject line unsubscribe first line in the body If that fails, try email to (purportedly that should go to a person). See also the original subscriptions message that you will received http://www.iki.fi/~era/procmail/welcome.txt 4.5 Procmail recipe modules and faqs Procmail is discussed in usenet newsgroup *comp.mail.misc*. "Procmail archive" ftp://ftp.informatik.rwth-aachen.de:/pub/packages/procmail/ Articles from procmail mailing list: covers from 1994-08 to 1995-05 (A .gz file: ~2Meg when uncompressed) And latest articles can be found here, hosted by Achim Bohnet Covers from 1995-10 to the present day. . The www page has nice search capabilities. http://www.rosat.mpe-garching.mpg.de/mailing-lists/procmail/ http://www.rosat.mpe-garching.mpg.de/~ach/exmh/archive/procmail/ "Era's Procmail faq" http://www.iki.fi/~era/procmail/mini-faq.html http://www.dcs.ed.ac.uk/~procmail/faq/ [mirror] Also available by email, the ITEM can be: links.html, mini-faq.html, procmail-faq To: Subject: send ITEM "Era's Procmail Link collections" http://www.iki.fi/~era/procmail/links.html ...A page full of good links to the world of procmail "Catherine's Getting Started With Procmail" http://shell3.ba.best.com/~ariel/nospam/proctut.shtml This is a quick tutorial intended to get a procmail neophyte started using procmail with as little trouble and fuss as possible. "Joe Gross's short Procmail tutorial" http://www.procmail.net/ ...Using procmail and a feature of ph you can set up your own mailing list without needing root on your own machine. "Unix manpages" http://www.xs4all.nl/~pater/manpages/ ...If you don't have procmail manpages at hand, check this site. It contains a wealth of Unix related manpages online. Jeroen Paternostre 4.6 Procmail mode for Emacs If you use Emacs, please download the Procmail programming mode, `tinypm.el'. Lint is included in there and it can auto-correct mistakes on the fly. You can get it from the mentioned _uta_ ftp site. Here is an example of its output: *** 1997-11-24 22:13 (pm.lint) 3.11pre7 tinypm.el 1.80 cd /users/jaalto/junk/ pm.lint:010: Warning, no right hand variable found. ([$`'] pm.lint:055: Pedantic, flag orer style is not standard `hW:' pm.lint:060: Warning, message dropped to folder, you need lock. pm.lint:062: Warning, recipe with "|" may need `w' flag. pm.lint:073: Warning, Formail used but no `f' flag found. 4.7 Procmail module list Where to get the modules The UBE stop procmail modules are not listed here. See pointers in "procmail code" section later. o All pm-ja*.rc modules are in Jari's procmail kit. The Procmail code library page is at http://www.procmail.org/jari/pm-code.html o Other modules are by Alan Stebbens http: //reality.sgi.com/aks/ o 1998-12-08 Eli the Bearded <*@qz.to> announced in comp.mail.misc that he had made his procmail modules available at [1999-12-27 #broken-link] http: //www.qz.to/eli/src/procmail/. You may find interesting procmail code there but the modules themselves are not general purpose *plug-in* modules that you could use right away. Some functionality included: Inline decoding of MIME text attachments (rc.mime-decode) Cleansing of obscure "Re:" formats in subject (rc.pre-list) Nifty autoresponder (rc.qz-2) Sophisticated dupicate email catching (rc.dupes) Example of using my mail bouncer (rc.lists-out) Detection of some classes of autoreplies (rc.daemon) Various junk mail filtering (rc.filter) Daily log files (rc.vars) Terminology *subroutine* = A piece of code that gets something in `INPUT' and responds with `OUTPUT'. Subroutine is not message specific. *recipe* = A piece of code that is somewhat self contained: It reads something from the message or does something according to matches in message. Recipe may be message-specific. Foreword to using modules In the module listing, some of the modules are recipes and some can be considered subroutines. Let's take the address exploder module that was discussed a while ago. First, visualise following familiar programming language pseudo code: (ret-val1, ret-val2 ...) = Function( arg1, arg2, arg3 ...) *Function* may return multiple arguments and multiple arguments can be passed to it. Clear so far. Let's show how this applies to procmail modules: RC_FUNCTION = $PMSRC/pm-xxx.rc # name the subroutine/module RC_FUNCTION2 = ... INPUT = "value" # Set the arg1 for module INCLUDERC = $RC_FUNCTION # Call Function( $arg1 ) :0 # Examine function ret val * ERROR ?? yes ... This should be pretty clear too. You just have to look into the subroutine/module which you intend to use, to find out what arguments it wants which you _need_ _to_ set (INPUT) before calling it. The documentation also tells you what values are returned, e.g. one of them was ERROR. If it were recipe/module, the call would be almost the same, but instead of returning values, the recipe/module most likely does something to your message or writes something to the data files etc. A *Recipe/module* is much higher level, because it may call multiple subroutine/modules. The distinction between subroutine and recipe module type is not crystal clear, but I hope the above will clarify a bit the Procmail module/subroutine/recipe concept. Header file modules These are like #include .h files in C, they define common variables, but do not contain actual code. o pm-javar.rc -- Defines standard variables: SPC WSPC NSPC SPCL and perl styled \s \d \D \w \W and \a \A (alphabetic characters only) o headers.rc -- From Alan's procmail-lib. Define standard regexp and macros: address, from, to, cc, list_precedence General modules o *pm-jafrom.rc* -- Derive FROM field without calling `formail' unnecessarily. If all else fails, use formail. o *get-from.rc* -- From Alan's procmail-lib. get the "best" From address. Sets FROM and FRIENDLY, the latter being the "friendly" user name sans address. o *pm-jaaddr.rc* -- Subroutine to extract various email components from INPUT. Like address=foo@some.com, net=com, account=foo... o *pm-jastore.rc* -- Subroutine for general mailbox delivery. Define MBOX as the folder where to drop message and this subroutine will store it appropriately. Supports single mboxes, ".gz" mbox files, directory files and MH folders with rcvstore. Low-level Date and time handling For these, you get the date string from somewhere, then feed it to some of these subroutines: o *pm-jatime.rc* -- a low-level subroutine. Parse time "hh:mm:ss" from variable INPUT o *pm-jadate1.rc* -- a low-level subroutine. Parse date "Tue, 31 Dec 1997 19:32:57" from variable INPUT o *pm-jadate2.rc* -- a low-level subroutine. Parse ISO standard date "1997-11-01 19:32:57" from variable INPUT o *pm-jadate3.rc* -- a low-level subroutine. Parse date Tue Nov 25 19:32:57 from variable INPUT o *pm-jadate4.rc* -- Call shell command "date" once to construct RFC "Tue, 31 Dec 1997 19:32:57" and parse the YY MM HH and other values. You usually use this subroutine if you can't get the date anywhere else. Higher-level Date and time handling You use these recipes to get the date directly from the message: o *pm-jadate.rc* -- higher-level recipe. Read date from message's headers: From_ Received, or call shell `date' if none succeeds. o *date.rc* -- higher-level recipe. From Alan's procmail-lib: parse date or from headers Resent-Date:, Date, and From Forwarding and account modules o *pm-japop3.rc* -- Pop3 movemail implemented with procmail. You can send a "pop3" request to move your messages from account X to account Y. Each message is send separately. This recipe listens to "pop3" requests. o *pm-jafwd.rc* -- control forwarding remotely. You can change the forward address with a "control message" or turn forwarding on/off with a "control message" o *pm-japing.rc* -- Send short reply when subject contains the word "ping" to show that the account is up and email address is valid. o *correct-addr.rc* -- From alan's procmail lib. To help forward mail from an OLD address to a NEW address, and do some mailing list mail management. This recipe file is intended to make it easy for users to forward their mail from their old address to a new address, and, at the same time, educate their correspondents about it by CC'ing them with the mail. Vacation modules o *pm-javac.rc* -- A framework for your vacation replies. This recipe will handle the vacation cache and compose an initial reply; which you only need to fill in. (Like putting vacation message to the body) o *ackmail.rc* -- From Alan's procmail lib. procmail rc to acknowledge mail (with either a vacation message, or an acknowledgement) Message-id based modules o *pm-jadup.rc* -- Handle duplicate messages by Message-Id. Store duplicate message in separate folder. o *dupcheck.rc* -- From Alan's procmail-lib. If the current mail has a "Message-Id:" header, run the mail through "formail -D", causing duplicate messages to be dropped. Can use MD5 hash in cache. Cron modules o *pm-jacron.rc* -- A framework for your daily cron tasks. This recipe contains all the needed checks to ensure that your includerc is called whenever a day changes. (Day change is subject to messages you receive). Your own cron includerc is run once a day. Backup modules o *pm-jabup.rc* -- Save messages to backup directory and keep only N messages per day. Idea by John Gianni, packaged by Jari. Note: The implementation will always call shell for each message you receive; so using this module is not recommended if you get many messages per day. Instead, use the cron module to clean the messages' backup directory only once a day, and not everytime a message arrives. Confirmation modules o *pm-jacookie.rc* -- Handle cookie (unique id) confirmations. Also known as Procmail authentication service (PAS). This simple procmail module will accept messages only from users who have returned a "cookie" key. You can use this to to protect your mailing list from false "subscribe" messages or from getting mail from unknown people, typically spammers who won't send the cookie back to you to "validate" themselves. Uses subroutine pm-jacookie1.rc, which generates the unique cookie; CRC 32 by default. o See also Michelle's confirmation module for SmartList File Servers o *pm-jasrv.rc* -- A Mime Procmail file server (MPFS) It contains all the instructions and supports several MIME encoding types: text/plain and gzip. The keyword SEND is configurable. You can set up as many file servers as you need to different directories by changing the SEND keyword. MPFS supports password for file access. o *commands.rc* -- From Alan's procmail-lib, check for commands in the subject line. Handles commands (send|get) [help|info|procmail info|procmail lib|procmailrc] and a few others. o *send-file.rc* is a very simplistic piece of procmail code to send file (non-MIME support) requested in subject line. http://www.universe.digex.net/~mbr/unix/send-file.html Mime modules o *pm-jamime.rc* -- Subroutine to read MIME headers and put the mime version, boundary string, content-type information to variables. o *pm-jamime-decode.rc* -- recipe to decode quoted-printable or base64 encoding in the body. o *pm-jamime-kill.rc* -- Recipe for attachment killing: wipes out the extra mime cruft leaving only the plain text. Applications for killing: ms-tnef attachment (MS Explorer 7k), html attachments (netscape, MS Express) vcard (Netscape), PCX attachment (Lotus Notes). o *pm-jamime-save.rc* -- Recipe for saving simple file attachment. When you receive _ONE_ file attachment in a message, this recipe can save it in a separate directory. The content is also decoded (base64,qp) while saving. Filtering message body or headers o *pm-jadaemon.rc* -- Handle DAEMON messages by changing subject to reflect a) the error reason b) to whom the message was originally sent c) original subject sent and what was the subject. Store the DAEMON messages to separate folder. o *pm-jasubject.rc* -- Standardize Subject "Re[32]: FW: Sv: message" or any other derivate to de facto "Re: message" o *pm-janetmind.rc* -- Reformat http://minder.netmind.com/ messages, The default 4k message is shortened to a few important lines. Miscellaneus modules o *pm-jaempty.rc* -- check if message body is empty (nothing relevant). Define variable BODY_EMPTY to "yes" or "no" if message is empty. o *pm-janslookup.rc* -- Run nslookup on given address. If you compose return address with "formail -rt -x To:" you can verify if domain is registered before sending reply. Uses cache for already looked up domains. o *guess-mua.rc* -- Guess the Mail User Agent and set MUA: MH,PINE,MAIL Mailing list modules o *Microlist* a small mailing list module by david hunt ...This version contains vars set for my environment and needs, and requires resetting of those vars before use. Its exact function and use will remain a mystery until I get a readme file written for it. If anyone wants to use it, I suggest you write to me first. If anyone has any suggestions or criticisms (no matter how harsh) please write http://www.west.net/~dh/homedir/microlist/microlist4.3 o *pm-jalist.rc* -- Subroutine to extract mailing list name from message. Do you need to add a new recipe to your .procmailrc every time you subscribe to new mailing list? If you do, take a look at this module, which examines the message and defines variable `LIST' to hold the mailing list name. You can use it directly to save the messages adaptively to correct folders. No more hand work and manual storing of mailing list messages. 4.8 Where to get Procmail code and modules "Alan's procmail modules" Send subject "send procmail library" to Alan Stebbens http://reality.sgi.com/aks/ "pm-code, Jari's Procmail modules" http://www.procmail.org/jari/ --> See pm-code.zip or similar. "Concordia scripts" http://alcor.concordia.ca/topics/email/auto/procmail/ ...We provide sample sets of recipes to get you started. The great thing about the concordia scripts is the fact that they are designed to run from a central location and be called from a .procmailrc installed in the user's ~/home directory. "David's" David Hunt ...My .procmailrc and .forward files can be viewed at http://www.west.net/~dh/homedir/pmdir/ 4.9 Procmail code to filter UBE _Sysadms_ _remember_ : Spam filtering is much more efficiently done in the MTA, especially if you are just looking at From and To lines. For example, you can setup in Exim a rule that blocks \d.*@aol\.com (that is any aol.com local part that begins with a digit). AOL guarantees that _none_ of their addresses begin with a digit. Exim rejects such bogus addresses at the SMTP level before the message is received. "Daniel's spam filter" 1997-09-13 Daniel Smith sent excellent spam filter called `spamc.rc'. It used some nice heuristics and filters from various people, including [david] and [philip]. Later Dan made substantial changes to it and the new version is available from ftp://ftp.bristol.nl/pub/users/DanS/spamcheck "pm-jaube.rc Jari's ube filter (compiled from others)" After Daniel Smith posted his spam recipes to procmail mailing list, Jari investigated them and compiled other recipes to a general purpose UBE module that needs no special setup and can be installed via simple INCLUDERC. No additional ube-list files are used, all UBE detection happens using procmail rules. The module is included in kit `pm-code.zip'. "Catherine A. Hampton's Spambouncer" http://www.best.com/~ariel/nospam/ ...The attached set of procmail recipes/filters, which I call The Spam Bouncer, are for users who are sick of spam (unsolicited junk email) and want to filter it out of their mail as easily as possible. These recipes can be used as shared recipes for a whole system, or by an individual for their own mailbox only. "Protect yourself from spam: A practical guide to procmail" http://www.sun.com/sunworldonline/swol-12-1997/swol-12-spam.html ...take you, step by step, through everything you need to know in order to enlist the aid of a Unix host in filtering unwanted e-mail traffic. This page is excellent to get you started with procmail and filtering with simple recipes and how to store messages to folders. Recommended for newcomers to Procmail. "Junkfilter" by Gregory Sutter http://www.pobox.com/~gsutter/junkfilter/ ...Junkfilter is a user-configurable procmail-based filter system for electronic mail. Recipes include checks for forged headers, key words, common spam domains, relay servers and many others. "Download procmail spam filters" http://www.telebyte.com/stopspamr This is excellent site and contains many other spam stop pointers. "SpamDunk" http://www.interlog.com/~waltdnes http://www.interlog.com/~waltdnes/beta/techie.htm ...This webpage shows a commented example of a working .procmailrc file that works for me. I have tried to make things as generic as possible, but there are no guarantees that it will work for anyone else. 5.0 Dry run testing 5.1 What is dry run testing It means that you call your procmail test script directly with sample test mail % procmail $HOME/pm/pm-test.rc < $HOME/tmp/test-mail.txt The script pm-test.rc has the procmail recipe you're testing or improving. The test-mail.txt is any valid email message containing the headers and body. You can make one with any text editor, e.g. `vi', `pico' or `emacs' in your Unix system. Here's a simple test mail skeleton: From: me@here.com To: me@here.com (self test) X-info: I'm just testing BODY OF MESSAGE SEPARATED BY EMPTY LINE txt txt txt txt txt txt txt txt txt txt Remember that you can define environment variables as well in the dry run call. Here's an example where procmail just executes the script and does nothing fancy. % procmail VERBOSE=on DEFAULT=/dev/null \ ~/pm/pm-test.rc < ~/txt/test-mail.txt Suppose the script prints something to logfiles, but you'd instead like to get it all dumped to screen. No problem, first find out your tty value by calling `tty' at shell prompt and pass that on the command line. Here the default LOGFILE is directed to take care of redirecting "LOG=" commands and statement "MYTEST_LOG=${MYTEST_LOG:-$HOME/pm/pm-test.log}" # `tty' tells what to fill in /dev/.. % procmail VERBOSE=on DEFAULT=/dev/null \ LOGFILE=/dev/pts/0 MYTEST_LOG=/dev/pts/0 \ ~/pm/pm-test.rc < ~/txt/test-mail.txt 5.2 Why the From field is not okay after dry run It now says "From foo@bar Mon Sep 8 14:38:06 1997" [philip] Don't worry about this. It's a side-effect of running the message through formail after having generated any auto-reply -- the auto-reply generated by "formail -rt" doesn't have a "From " header (it's pointless for outgoing messages), so the second formail adds one, not knowing that it'll just be ignored by sendmail later (well, sendmail will extract the date from it, but that's ignorable). You only see it because you're saving to a folder instead of the mailing it. 5.3 Getting default value of a procmail variable [david] There's always this way to learn a variable's initial value (note the strong quotes), which Stephen uses to get procmail's value for $SENDMAIL in the scripts that build SmartList: procmail LOG='$PATH' DEFAULT=/dev/null /dev/null < /dev/null Since LOGFILE hasn't been defined, $PATH will be printed to the screen. One caution: if there are any variables in the definition of $PATH (such as $HOME), they'll be expanded in the output. 6.0 Things to remember 6.1 Get the newest procmail Lot of troubles surface only because you have an old procmail version. Be sure to have the latest. Knock your sysadm or ISP until he installs this version and don't give up, if you're serious about using procmail. Here is a command to check your procmail version number: % procmail -v 6.2 Csh's tilde is not supported Real csh or Emacs freaks have grown accustomed to using tilde (~) everywhere, but must drop that habit now. Procmail doesn't support it; just use `$HOME'. When you write procmail recipes, think *sh* not *csh*. This mindset will automatically get your brain tuned to the right programming habits. 6.3 Be sure to write the recipe starting right The recipe starts with `:0' or just with `:' but the latter one is somewhat dangerous and easy to miss. Beware writing it `0:' as it happens easily. The Procmail code checker, Lint, also requires that you use the `:0' recipe start convention. [philip] Always put a zero after the colon that begins the recipe. In the first versions of procmail, you would put the number of conditions, with a default of 1. That was annoying, and the computer can do the counting easier, so Stephen made it so that a count of 0 indicates that the conditions are all the lines beginning with a `*'. The default is one, unless the `a', `A' , `e', or `E' flags is given, in which case the default is zero. *ALWAYS* *START* a *RECIPE* *WITH* `:0'. 6.4 Always set SHELL [faq] If your login shell is a C shell (csh or tcsh), avoid havoc: as a precaution, always put following at the top of your .procmailrc. SHELL = /bin/sh If system has no /bin/sh and you're forced to use csh/tcsh [] Csh and tcsh execute the .cshrc first, THEN if, and only if it is the login shell (not a sub shell) it executes the .login, which should contain basic important system setting like `stty' commands. Likewise, bash and ksh users are taught to define and export PATH in .profile, so our per-shell startup files would not have clobbered the PATH set in .procmailrc the way your .cshrc did. [philip] ...I have been told by other sysadmins that there are systems on which csh was hacked to source the .login before the .cshrc. For various reasons I suspect these to be systems based on older versions of BSD (say, 2.3 BSD). As for tcsh, the order in which the .login and .cshrc is sourced is a compile-time option which defaults to the .cshrc (or .tcshrc) before the .login. There may be some wackos out there who change the default in memory of the system(s) that they were raised on. I suggest electroshock as the proper treatment. ...done sys admin on Crays, Convexes, Suns, SGIs, Decs, PC running BSDI, Linux and Free BSD, and I have never run into a system where the .cshrc is sourced AFTER the .login. If someone goes to the trouble to change the order, I would love to know a valid reason for it. Procmail won't work well with SHELL set to csh derivate [1998-08-17 PM-L Volker Kuhlmann] ...The blame lies with procmail and its documentation. Obviously, procmail is programmed with the assumption that the login shell is a sh derivative. This assumption is a) not very nice, and b) not stated in the otherwise very good documentation. Of course a user can set SHELL to tcsh. If then procmail is too stupid to hack it, it ought to say so clearly, and the above-mentioned questions of people using tcsh will disappear from this list. One could also be nice and point out pitfall (3) mentioned above in the procmail docs. It is customary to have terminal configuration in .login. If it is shifted to .cshrc it should be properly surrounded by if .. endif. Perhaps it is not customary to configure the terminal in .bashrc (where else then? - only a rhetorical question), but that is no reason to blame it on tcsh. My .cshrc only setenvs the environment when it is a login shell (shell level 1). Obviously procmail runs a login shell. As I said earlier, there are good reasons for setting a full PATH independently whether the shell is interactive or not. So, when procmail executes programs with SHELL=tcsh, PATH is set to the tcsh defaults. That may or may not be desirable, depending on the individual case. No problem with that and avoidable (run tcsh with -f). Nice if it was in the procmail docs. But then, the PATH getting clobbered is not the point here (just a side-effect I didn't realise until 2 people pointed it out). 6.5 Check and set PATH [jari] It is very likely that the default PATH environment variable that your .procmailrc sees it not enough. To play safe, so that all the needed binaries can be found when escaping to shell in .procmailrc, set the `PATH' variable as a very first statement. Here is one example that I use for HP-9 HP-10 and in SUN-OS. You can add paths that don't exist, that way you can use the same .procmail on multiple servers (On HP and SUN as I do) PATH = $HOME/bin:\ /usr/contrib/bin:\ /bin:/usr/bin:/usr/lib:/usr/ucb:/usr/sbin:\ /usr/local/bin:/opt/local/bin:\ /vol/bin:/vol/lib:/vol/local/bin:${PATH} [Richard] It is dangerous to have many directories in the PATH, especially if you do not control the content of any of them. A sysadmin could put a newer, incompatible version of a program you rely upon in one of them and you cause difficult-to-diagnose problems. It may make more sense to link the binaries you need into your own ~/bin directory and include just that in your PATH. [jari] In principle I agree with Richard's advice, but in practice the newer version of the program seldom breaks the procmail code you have written. It depends on your "threat level": be more cautious and use Rik's advice; alternatively trust the system and adapt to (rare) changes. Your call. 6.6 Keep the log on all the time It's best that you put these variables at the very start of your .procmailrc. When you start using procmail, you also want to know all the time what's happening there and why your recipes didn't work as expected. The answer to almost all your questions can be found in the log file. As the log file will grow to be quite big, remember to set up a cron job to keep it moderate size. LOGFILE = $PMSRC/pm.log LOGABSTRACT = "all" VERBOSE = "on" 6.7 Never add a trailing slash for directories [philip] Drop the trailing slash: it'll choke if you ever end up on Apollo's DomainOS where double slashes are network references. If the directory has a trailing slash, it will choke on most OSes (they treat it like "/."). DIR = /full/path/to/www/directory/ # Wait... FILE = $ARCHIVEDIR/file # Ouch ! 6.8 Remember what term DELIVERED means [alan] When procmail delivers a piece of mail, whether to a file or a pipe-command, if the write succeeds, then the mail is considered to have been delivered, and processing stops with that recipe file. Here is the relevant text from man page: ...There are two kinds of recipes: delivering and non-delivering recipes. If a delivering recipe is found to match, procmail considers the mail (you guessed it) delivered and will cease processing the rcfile after having successfully executed the action line of the recipe. If a non-delivering recipe is found to match, processing of the rcfile will continue after the action line of this recipe has been executed. 6.9 Beware putting comment in wrong place You like commenting a lot, sticking them everywhere possible? Yes, I do that too, and got into trouble because one is not that free to comment code in procmail. Pay attention to the following example :0 # comment, nice tune... * condition # OUCH, Ouch, ouch. This comment must not be here!! # Hm, Old procmail versions don't understand this # Are you sure you want to put comments inside # Condition line? * condition { # comment ok # comment ok :0 # comment ok /dev/null # comment ok } # comment ok So, the place to watch is the *condition* line. Some later procmail versions promised to correct this misfeature, but it never came true. No procmail exists yet that allows putting comments on the same line with a condition clause. 6.10 Brace placement Be careful with your braces and remember that old procmail versions aren't as forgiving as newest version. Below you see classical "Test OK condition first, and if that fails then do something else". See the side comments. :0 * condition # No space allowed here! {} # Wrong, at least _one_ empty space :0 E {do_something } # Again mistake, must have surrounding spaces 6.11 Local lockfile usage Lockfiles are only needed when procmail is doing something that should be serialized, i.e., when only one process at a time should be doing it. This generally means that any time you write to a file, you should have a locallock, preferably based on the name of the file being written to. Forwarding actions ('!'), and 99% of all filters don't need lockfiles. However, if a filter action writes to a file while filtering, then you may need a lock. Procmail always does kernel locking when it writes mail to files via simple file actions. So even if you forgot the lock colon, procmail tries to play safe if kernel locking has been compiled in. Beware misplacing the lock colon(:) :0: a # Ouch! Wrong unless you want a lockfile named a :0 a: # Okay. Note that in delivering recipes where you manually write the content, you must use local lockfile with `>' token, because procmail can't determine lock by itself. It can only determine the lockfile from the `>>' token. [stephen] However, putting a lockfile on a recipe like this is, of course, utterly useless. So you might as well omit the locking entirely. # Save last body of message to file mail.body :0 b: mail.body$LOCKEXT | cat > mail.body o If the command line in the procmail rcfile contains ">>", a name for the local lockfile will be implicit, and the second colon alone is enough. o If the command doesn't write to a file, or doesn't write to the same file as anything else (including a matching letter that makes procmail run the same command) that might run at the same time, the local lockfile is unnecessary. [philip] Watch this too. A nesting block that does not launch a clone cannot take a local lockfile on the recipe that starts the braces. A nesting block that does launch a clone can. (see the error) :0: file$LOCKEXT { # error: "procmail: Extraneous locallockfile ignored" # - This lock file will be ignored # - If the recipes inside the braces try to use file.lck # as a lockfile, then you'll have a deadlock situation. :0 : /tmp/tmp.mbx } Let me also explain why the `w' is so important. Notice, that the two here are equivalent. The `W' here is implicit. _NOTE_: this is only true on the recipe that opens a nested block. On a recipe with a program, forward, or delivery action, `W'' is different from `w' is different from missing both. :0 c: file$LOCKEXT :0 Wc: file$LOCKEXT { ... } { ... } To quote the comment in source code, "try and protect the user from his blissful ignorance". The parent will always wait for the cloned child to exit when a lockfile is involved. The only question is whether or not it should be logged. If you want failure of the cloned child to be logged, then you should use the `w' flag, ala: :0 wc: file$LOCKEXT { ... } A local lockfile can be used to lock a clone; the parent procmail will remove it when the clone exits (thus it serves as a global lockfile for the clone). If the braced block does not launch a clone, asking for a local lockfile generates an error. 6.12 Global lockfile [david] If you want to block everything while the recipe runs, even during the _conditions_, use global lock. For example in this construct the `formail' which updates the message-id cache file must be protected with a global lockfile. MID_CACHE_LEN = 8192 MID_CACHE_FILE = $PMSRC/msgid.cache MID_CACHE_LOCK = $PMSRC/msgid.cache$LOCKEXT LOCKFILE = $MID_CACHE_LOCK :0 * ^Message-ID: * ? $FORMAIL -D $MID_CACHE_LEN $MID_CACHE_FILE { LOG = "dupecheck: discarded $MESSAGEID from $FROM $NL" :0 # no lockfile ! $DUPLICATE_MBOX } LOCKFILE # kill variable You cannot use local lockfile as below: :0 : $MID_CACHE_FILE$LOCKEXT * ^Message-ID: * ? $FORMAIL -D $MID_CACHE_LEN $MID_CACHE_FILE because the local lockfile named on the flag line will be created only if the conditions have matched and the action is attempted. One more note: watch carefully, that there is _no_ `:' lock when delivering to `DUPLICATE_MBOX' because the outer global lockfile already prevents all other procmail instances from executing this part of the recipe. 6.13 Gee, where do I put all those ! * $ ?? Ahem. I can't tell you exactly what to do or how to write your own procmail recipes, but I can tell how I'm writing them. Here is my condition line token order: * $ ! ? BH VAR ?? test That won't say much unless I give you something to compare with. Here is one perfectly valid rule, but not my style :0 *$ ^Subject:.*$VAR *! ^From:.*some *B ! ?? match-the-string-in-body *$? $IS_EXIST $FILE *VARIABLE ?? set I prefer lining up things in the condition lines. The first column is reserved for dollar sign, the second for *not* operator and so on. The important thing is that I can see at a glance if I have set the variable expansion dollar in the line (leftmost). :0 *$ ^Subject:.*$VAR * ! ^From:.*some * ! B ?? match-the-string-in-body *$ ? $IS_EXIST $FILE * VARIABLE ?? set 6.14 Sending automatic reply, use X-loop header Do not send automatic reply without checking "! ^FROM_DAEMON" condition and always include `X-Loop' header and check its existence to prevent mail loops :0 * conditions-for-auto-reply *$ ! ^$MY_XLOOP * ! ^FROM_DAEMON | $FORMAIL -A "$MY-XLOOP" ...other-headers... 6.15 Avoid extra shell layer (check command for SHELLMETAS) [dan] It is very important to study your shell command calls and try to save the overload of the extra layer of shell. It may be extra work once when you write your rcfile but it saves effort on each piece of arriving email. When procmail sees a character from `SHELLMETAS', it runs # Default SHELLMETAS: &|<>~;?*[ # Default $SHELLFLAGS: -c % $SHELL $SHELLFLAGS "command -opts args" instead of % command -opts args That is because procmail's ability to invoke other programs does not include filename globbing ([, *, ?), backgrounding (&), piping (|), succession (;), nor conditional succession (&&, ||). If it sees any of those characters (before expanding variables), it hands the job over to a shell. Sometimes those characters appear in arguments to a command without having their shell meta meaning and procmail really could invoke the command directly without the shell. You can see the distinction in a verbose logfile: if procmail runs the command itself, it logs Executing "command,-opts,args" with a comma between each positional parameter, but if it calls a shell, the original spacing from the rcfile appears unchanged in the logfile: Executing "command -opts args" So, if you know you won't be needing shell expansion, wrap your shell calls with this: savedMetas = $SHELLMETAS SHELLMETAS # Kill variable ..command that does not need shell expansion features.. SHELLMETAS = $savedMetas 6.16 Think what shell commands you use For every message, procmail launches the processes you have put into your .procmailrc. If you haven't paid attention to optimization before, now it's serious time to take a magnifying glass and check every recipe and the processes in them. When you write you private shell scripts, the performance hit is not so important, but for mail delivery, the matter is totally different. First, let's see some programs and sizes: The following is from HP-UX 10, where the binaries seem to include debug and symbol table code. 131072 Aug 21 1996 /usr/bin/awk 196608 Oct 1 1996 /usr/bin/sort 245760 Jun 10 1996 /usr/bin/grep 262144 Jun 10 1996 /usr/bin/sed 303552 Dec 7 1995 /usr/local/bin/gawk 544768 Jun 10 1996 /usr/contrib/bin/perl [perl 4.36] 822232 Aug 25 13:58 /opt/local/bin/perl5.00401 text data bss awk: 72727 + 51316 + 15317 = 139360 sort: 173225 + 18496 + 183076 = 374797 sed: 237248 + 16992 + 56252 = 310492 grep: 221591 + 16176 + 53816 = 291583 perl4: 502220 + 36044 + 65632 = 603896 perl5: 633812 + 69612 + 2385 = 705809 gawk: 160018 + 5264 + 7168 = 172450 The binary siszes above are not the typical cases: these are from another system 4 Sep 28 14:25 /usr/local/bin/awk -> gawk 32768 Nov 16 1996 /usr/bin/grep 49152 Nov 16 1996 /usr/bin/sed 114688 Oct 20 1996 /usr/local/contrib/gnu/bin/grep 155648 Nov 16 1996 /usr/bin/awk 155648 Nov 16 1996 /usr/bin/nawk 221184 Nov 16 1996 /usr/bin/gawk 311296 Jan 27 1997 /usr/local/bin/gawk 958464 Nov 2 16:34 /usr/local/contrib/bin/perl 1196032 Sep 14 1996 /usr/local/bin/perl Stan Ryckman wants you to know that: Comparing byte sizes on disk means nothing here... these things may or may not have been stripped. Any symbol tables included in the byte counts you see above won't affect process start-up time. The `size' command will give a better handle on what will be needed in starting a process. The three segments may each have their own overhead, though, and the relative contributions of those segments to startup time may well be system-dependent. Hm. Can we draw some conclusion? Not anything definitive, but at least something: o While sed and grep may be bigger than awk in some systems, this is an exception. They are usually much smaller and fast to use. o But complex commands that would require many processes to be chained together, like `grep -v | grep | sed' combination could be usually accomplished with one awk call. Ask somewhere how to do it with awk if you don't know the language, it's quite alike perl o Don't use anything else but standard awk, _gawk_ and _nawk_ are bigger and may not be found on all systems. o Avoid perl at all costs; it's many times (6) bigger than awk. Perl is slow-to start up, due to intermediate compilation process at startup. o Remember that if procmail is running in a dedicated mail host, it probably doesn't even have any goodies installed, just the boring standard versions; which may not be even the same as what you see on current host. e.g. My mail host is running HPUX-9, while my login is on HPUX-10. They have very different installations. Here are some more programs. Don't even think of extracting fields with `grep' or `awk', like "grep Subject", because `formail' is much smaller and more optimized for tasks like that. 37007 Sep 5 15:53 /usr/local/bin/formail # 3.11pre7 28672 Jun 10 1996 /usr/bin/tr 20480 Jun 10 1996 /usr/bin/tail 20480 Jun 10 1996 /usr/bin/cat 20480 Sep 26 1996 /usr/bin/expr 16384 Jun 10 1996 /usr/bin/head 16384 Jun 10 1996 /usr/bin/cut 16384 Jun 10 1996 /usr/bin/date 16384 Jun 10 1996 /usr/bin/uniq 16384 Jun 10 1996 /usr/bin/wc 12288 Jun 10 1996 /usr/bin/echo 6.17 Using absolute paths when calling a shell program Shell programmers know that if you use absolute path when you call the executable, shell doesn't have to search through long list of directories in $PATH. This may speed up shell scripts remarkably. The correct way to use such an optimization is to define variables to those programs. Hm, should you use such optimization in your procmail code? That's two folded question and I....would say yes and no. How many shell calls do you have? Do you use grep or formail a lot? Then you could optimize these calls. To be portable, define variables for executables: # perhaps defined in separate INCLUDERC # # INCLUDERC = $PMSRC/pm-mydefaults.rc FORMAIL = /usr/local/bin/formail GREP = /bin/grep DATE = /bin/date :0 fhw | $FORMAIL -rt And when you port your .procmailrc to different environment that has different paths, you could use this recipe in addition to one just mentioned above: FORMAIL = ...as above :0 * HOST ?? second-host { # In this host the paths are different. Reset. $FORMAIL = "formail" $GREP = "grep" $DATE = "date" } 6.18 Disabling a recipe temporarily If you have a recipe that you would like to disable for a while, there is an easy way. Just add the "false" condition line before any other conditions. The "!" also nicely visually flags that "this recipe is NOT used". # This recipe stops at "!" and doesn't get past it. :0 * ! * condition * condition { ... } 6.19 Keep message backup, no matter what It's good to have a safety measure in your .procmailrc. Although you are an expert and have checked your recipes 10 times, there is still a chance that something breaks. One morning, when you browse your *BIFF* reminder log; you notice "Hm, there is that interesting message but it was not filed, where is it?". And when you go to study the procmail logs (you do keep the log going all the time) and it hits you: "Gosh; a mistake in my script! Message was fed to malicious pipe and I had that `i' flag there... *sniff*". And you greatly regret you didn't back up the message in the first place. So, before your procmail does anything to your message, put the message into some folder which is regularly expired. For example I use Emacs Gnus to handle the expiring. One could also use a cron job instead. Then you can relax knowing your email is safe. SPOOL = $HOME/Mail/spool # Backup storage # - This could be directory too. In that case you could use # cron job to expire old messages at regular intervals # - For once a day expiration, see procmail module list # and pm-jacron.rc BUP_SPOOL = $SPOOL/junk.bup.spool :0 c: $BUP_SPOOL Naturally you can filter out mailing list messages from the backup, because losing one or two (hundred) of them may not be that serious. Maybe you could use two backup spools, one for mailing lists and the other for your non-list messages. :0 c: * ! mailing-list1|mailing-list2 $BUP_SPOOL If you have the date variables set up as described below, you could also create a backup folder per day: $BUP_SPOOL = $SPOOL/$YYYY$MM$DD This makes it very easy to delete backups that are older than a given number of days, either manually or through a cron job. 6.20 Order of the procmail recipes When you start writing a lot of procmail recipes, you soon find out that it matters a great deal in which order your put your recipes. When each group of recipes starts growing too big, it's good practice to move each group to a separate rc file. Here is one recommended order: - backup important messages - cron-subroutine - handle duplicate messages - handle DAEMON MESSAGES - handle plus addressed message (RFC plus or sendmail plus addresses) - handle server requests (file server, ping responder...) - drop MAILING LIST messages - send possible vacation replies only after all above - apply kill file - detect mime and format or modify the message body - save private messages - and last: FILTER UBE. The backup, cron and duplicate handling go naturally to the beginning of your .procmailrc. Next comes a grey area where Daemon, plus handling (#REF #using_rfc_comment_trick_for; Note plus;); and server messages can be put. Mailing lists should be handled as early as possible, but after the server messages, because you want your services handled first. Do not send vacation replies before you have handled mailing lists to prevent annoying vacation replies to lists. After that you are left with "known" private messages and those of unknown origin. A kill file (to block based on sender) for rapid spammers, who send you message or several per day need to be checked before checking other messages. Last but not least: Put your UBE checkers to the end to avoid mishits of valid mail. DO NOT SEND AUTOMATIC COMPLAINT BACK. Drop the UBE to a folder, manually select the messages that need actions and send message to postmasters in the Received chain explaining that their mail relay has been hijacked. 7.0 Procmail flags 7.1 The order of the flags Order does not matter of course, but here is one stylistic suggestion. The idea here is that the most important flags are put to the left, like giving priority 1 for `aAeE', which affect the recipe immediately. Priority 2 has been given to flag `f', which tells if a recipe filters something. Also (h)eader and (b)ody should immediately follow `f', this is considered priority 3. In the middle there are other flags, and last flag is `c', which ends the recipe, or allows it to continue. In addition according to [david]: "...I'm quite sure that putting anything other than the opening colon and the number to the left of `AaEe' will cause an error." :0 aAeE HBD fhb wWir c: LOCKFILE | | | | | | | | | (c)ontinue or (c)lone flag last. | | | (w)ait and other flags | | (f)ilter flag and to filter what: (h)ead or (b)ody | (H)eader and (B)ody match, possibly case sensitive (D) The `process' flags first. (A)nd or (E)lse recipe You can write the flags side by side :0Afhw:$MYLOCK$LOCKEXT Or, as I prefer, leave flags in their own slot for more distinctive separation. Note that $LOCKEXT must be next to $MYLOCK, because it contains string ".lock". :0 A HB fhw: $MYLOCK$LOCKEXT 7.2 Flag w and recipe with | [alan] If the filter program exits with a 0 status (0 == okay), then procmail will replace the original input body with the output of the filter program. If the filter program exits with anything but zero, procmail will report an "error" to the log, and "recover" the input (not filter it) [david] I am very sure that that's the case _only_ if you have the `w' or `W' flag on the filtering recipe. Without `w' or `W', procmail won't care about a bad exit status from the filter and will replace the filtered portion with whatever standard output the filter produced. It may still report an error to the log but it won't recover the previous text. This, for example, will destroy the body of a message, even without `i': :0 fb | false With this, however, procmail will recover the original body: :0 fbW # same results even if we add `i' | false [stephen] No, not on all occasions. Procmail will not care about the exitcode here. However, if procmail detects a write error, it *will* recover (because of the missing `i' flag). Procmail will only detect a write error in such a case if the mail is long enough and does not fit in the pipe buffer that's in the kernel (typically 10KB). 7.3 Flag w, lockfile and recipe with | [manual] In order to make sure the lockfile is not removed until the pipe has finished, you have to specify option `w' otherwise the lockfile would be removed as soon as the pipe has accepted the mail. So if you see anything that looks like ">" or ">>" in your recipe, then that should immediately ring your bells. immediately check that you have included the `w' flag _and_ the lockfile `:'. :0 hwc: headc$LOCKEXT * !^FROM_MAILER | uncompress headc.Z; cat >> headc; compress headc 7.4 Flag f and w together The w tells Procmail to hang around and wait for the script to finish. [Wouldn't you think this ought to be implied by the f already?] [david] Of course the `f' flag is enough to make procmail wait for the filter to finish, but the `w' means something more: to wait to learn the exit code of the filtering command. If sed fails with a syntax error and gives no output, without `W' or `w' procmail would happily accept the null output as the results of the filter and go on reading recipes for the now body-less message. On the other hand, with `W' or `w' sed will respond to a non-zero exit code by recovering the unfiltered text. 7.5 Flags h and b [david] `hb' is the default; you need to use `h' only when you don't want `b' or vice versa. You can think of it this way: `h' means "lose the body" and `b' means "lose the header," but the two together cancel each other out. [philip] `hb' (feeding whole message) is the default for actions. You need to specify `h' without `b' if you want the action applied only to the head. `H' is the default for conditions. You need to specify `HB' or `BH' if you want to test a condition against the entire message. 7.6 Flag h and sinking to /dev/null When you drop something to /dev/null, use the h flag so that procmail does not unnecessarily try to feed whole message there. :0 h * condition /dev/null [philip] Procmail knows that it shouldn't create a locallock on /dev/null and that it shouldn't kernel lock /dev/null, and it knows to write it "raw" (no "From " escaping or appended newline). This means that procmail simply opens /dev/null, does its write with one system call, and closes it. I'm not sure if adding the `h' flag makes a real difference on modern UNIX kernels. I suppose it depends on how optimized the write() data is and in particular, whether a user-space to kernel-space copy is _required_, or whether it's delayed. If it's delayed then the code for handling /dev/null would presumably not do it, and the size of the write wouldn't actually matter. 7.7 Flag i and pipe flag f Flag `i' is useless in mailbox deliveries. [faq] The following will work some of the time, when the message is short enough, but that's a coincidence. With a longer message, though, Unix starts paying attention to what is happening, because it will have to buffer some of the data, and then when the buffered data is never read, an error occurs. The error is passed back to Procmail, and Procmail tries to be nice and give you back your original message as it was before this malicious program truncated it. Never mind that in this case you wanted to truncate the data. Anyway, the fix is easy: Just add an `:i' flag to the recipe ( `:0fbwi' instead of `:0fbw') to make Procmail ignore the error. :0 fbw * condition | malicious-pipe [dan] here's why the `i' flag is needed (courtesy of Stephan): You told procmail to filter the entire mail (header and body), so it does and it attempts to write out header and body to the filter. Then procmail notices that not the entire body is being consumed. Procmail, being rather paranoid when it comes to delivery of mail assumes something went wrong and considers this a failure of the filter. :0 fbwi | head -2 7.8 Flag r [philip] Procmail automatically turns on the `r' (raw mode) flag for deliveries to /dev/null, so there's no need to do it yourself. :0 r # you can leave out the `r' * condition /dev/null [david] You can use the `r' flag (for raw mode) on every recipe where you do not want a From_ line added. I'm assuming that there isn't one already there; the `r' flag keeps procmail from making sure that there are a From_ line at the top and a blank line at the bottom, but it will not make procmail remove them if they are already present. Also, be careful to use the `-f' option on all calls to formail so that formail won't add a From_ line. Someone who didn't need From_ lines -- I forget who -- found it annoying to put `r' onto every recipe and altered the source to prevent procmail from adding From_ lines at all, ever. I think a better idea would be a procmailrc Boolean to enable or disable them for all recipes without affecting other users. (Then perhaps we'd need a reverse `r' flag to undo raw mode for one recipe at a time?) 7.9 Flag c's background ...Interesting. My vision of `c' is to think of CONTINUE with message processing afterwards even if conditions matched. [david] Precisely: when you have braces, thinking "continue" instead of "copy" or "clone" can get you into trouble. Early versions of procmail, before braces and before cloning, called the `c' flag "continue" in their documentation; I think it is still called that in the source. When Stephen introduced braces (but not cloning at this point), it was of course implicit that an action line of "{" was non-delivering, and a `c' was extraneous. People put c's there because they wanted procmail to continue to the recipes inside the braces on a match, and procmail brushed it off with an "extraneous c-flag" warning. No harm done. When Stephen introduced cloning, though, I was rather upset that he was giving double duty to `c' instead of introducing something new like `C' for it, especially because people who absolutely wanted no clone but intended the recipes inside the braces to run in the same invocation of procmail as everything else were mistakenly putting c's on their braces to make sure procmail would "continue". People would (and did) get double deliveries. Roman Czyborra, though, said that if you consider `c' to stand for "copy", that covers both uses of `c': provide a copy to a simple recipe or, if there are braces, to a clone procmail that will handle the recipes inside the braces. Stephen agreed and changed the documentation accordingly. Longtime users of procmail and people who read old docs may still think of it as "continue", but since the introduction of clones, that is not a good way to look at it. "Copy" is much safer. 7.10 Flag c before nested block forks a child [alan] The combination of a nested block and the `c' flag causes procmail to fork a child process for the nested block, while the parent skips over it and continues on. The child process doesn't necessarily stop unless a *delivering* recipe (without the `c' flag) action succeeds. 7.11 Flag c and understanding possible forking penalty ... I run shell commands that need not to be serialized, so instead of doing the standard way: :0 hic # nbr.1 / standard way | command I assume I can avoid the extra fork caused by (c)lone flag altogether by using these. Any difference between these two? :0 # nbr.2 / alternative * ? command { } # ...No-op, Procmail syntax requires this dummy = `command` # nbr.3 / alternative [philip] There is a misunderstanding here. Let me clarify: Procmail only forks a full-blown clone on a recipe with the 'c' flag whose action is a nested block. If it's a simple mailbox deliver, pipe, or forward action then procmail does not fork a 'clone' (for pipe and forward actions procmail does have to fork, but only so it can execute the action). `nbr.1' and `nbr.2' take the same number of forks to execute. They also take the same effective number of writes (in case you're concerned about that). The latter also requires that procmail wait for the command to finish. `nbr.3' is worse than the above two, as procmail has to not only wait for the command to complete but also save the output into the named variable. 7.12 Flags before nested block Given the following recipe, let's examine the flag part :0 $FLAGS { do-something } [david] `HB' `AaEe' and `D' affect the conditions and thus are meaningful when the action is to open a brace. `HB' and `D' would be meaningless, of course, on any unconditional recipe, but they should not cause error messages. Generally, flags that affect actions are invalid there, and `bhfi' and `r' always are, but the others are partial exceptions: if you are using `c' to launch a clone, then `w' `W' and a local lockfile can be meaningful. If there is no `c', then `w' `W' and a local lockfile are invalid at the opening of a braced block. 7.13 Flags aAeE tutorial [david] `AaEe' are mutually exclusive and no more than one should ever appear on a single recipe. [philip] Actually, this is not true. e does not work with `E' or `a' (and procmail gives a warning if you try), and `A' is redundant if a is given, but at least some of the other combination make sense and work. o *A* = try this recipe if the conditions succeeded on the most recent recipe at that nesting level that did not itself have an A nor an a o *a* = same as `A', but moreover the action must have succeeded on the most recently tried recipe at that nesting level o *e* = Almost like `A', try this recipe if the conditions matched but the action failed on the most recently tried (not skipped) recipe at this nesting level. universe, `e' is the opposite of `a'. `e' only looks backwards past `E' recipes that were skipped because of their `E'. It doesn't care whether a previous recipe had an `A' or `a' flag. o *E* = try this recipe if the conditions have failed on the most recent recipe at that nesting level that did not have an `E' and on since then every recipe at that level that did have an `E'; essentially opposite of `A' These mnemonics might help: o *A:* if you did the recipe at the start of the chain, try this one (A)lso o *a:* if the last action at that nesting level was (a)ccomplished) o *e:* if the last action at that nesting level (e)rred o *E:* (E)lse because the conditions down the chain so far have not matched. Or "try this recipe unless the last tried recipe matched". # [philip] demonstrates `e' :0 : # match, but action fails /etc/hosts/foo :0 A # no match * -1^0 /dev/null :0 e # this is skipped because the last tried recipe didn't match { ...whatever } How they interact with one another when used consecutively has not been fully tested to my knowledge. Consider this: :0 * conditions non-delivering-action1 :0 a action2 :0 e action3 Is action3 done if action2 failed or if action1 failed (or perhaps in both situations)? [philip] Action 3 is only done if action2 failed. If the answer is action2, does this work to get action3 done if action1 failed? I think it does, but does it also run action3 if the conditions didn't match on the first recipe? [philip] Yes, and yes. :0 # [david] * conditions non-delivering action1 :0a action2 :0E action3 [philip] If that's not what you want, combine some flags: :0 * conditions non-delivering action1 :0 Ae action3 :0 a action2 If the conditions match, action1 will be executed. action3 will then execute if action1 failed, otherwise action2 will be executed [if action1 succeeded]. [david] I know what this structure does because I use it: :0 * conditions non-delivering action1 :0A action2 :0E non-delivering action3 :0A action 4 If the conditions match, action1 and action2 are performed and action4 is not (of course action3 is not either), even if action2 is non-delivering; if they fail, action3 and action4 are performed. The `A' on the fourth recipe refers back to the third and no farther. But I don't know about this: :0 * conditions non-delivering action1 :0A * more conditions action2 :0E non-delivering action3 :0A action 4 Now, suppose the conditions on the first recipe match but those on the second recipe do not match. Would the third recipe (and thus the fourth one) be attempted? I would expect so. [philip] Yes. The last tried recipe didn't match, therefore the `E' flag will be triggered. If that isn't what you want, you can prevent it this way: :0 * conditions { :0 non-delivering-action1 :0 * more-conditions action2 } :0 E # ignores mismatch inside braces, looks only at same level non-delivering action3 :0 A action4 If that is what you want, you can be positive this way: # if action2 is non-delivering or vulnerable to error that # would cause fall-through DID2 # Kill variable :0 * conditions non-delivering-action1 :0 A action3 :0 * ! DID2 ?? (.) non-delivering-action3 :0 A action4 # if action2 is delivering and sure to succeed :0 * conditions non-delivering-action1 :0 A * more-conditions action2 :0 non-delivering-action3 :0 A action4 [philip] or those who are interested, I'll note that there are only 3 combinations of the `a', `A', `e', and `E' flags that aren't either illegal or redundant. They are `Ae', `aE', and `AE'. I've shown a use for `Ae' up above. Here's an example of `AE': :0 * condition1 non-delivering action1 :0 A * condition2 non-delivering action2 :0 AE action3 action3 will only be executed if condition1 matched but condition2 didn't match. Without the A flag, action3 would be executed if either of them failed. This can also be done with a instead of A with analogous results. Procmail's "flow-control" flags may not be particularly easy to describe in straight terms (and this can all be made more complicated by throwing in a more varied mix of delivering vs non-delivering recipes), but I've found that it usually does what I expect it to do, and when it doesn't or I'm in doubt or I want to be particularly clear, I can always fallback to doing it explicitly via nesting blocks. Pick your poison... 8.0 Matching and regexps (regular expressions) 8.1 Philosophy of abstraction in regexps Here are two ways to view or write regexps. Make up your own mind. People who are in favor of writing pure native regexps in the recipes: [ ]<[ ]*("([^"\]|\\.)*"|[-!#-'*+/-9=?A-Z^-~]+)... # " o I'm not planning on "maintaining" that code, as the syntax for XXX will not ever change <>> o I some how doubt that anyone else will change that regexp more than trivially o If none of your other regexps use the categorical variables, and you're not changing the regexp, then what's the point? The variablized version will be slower, and will clutter the environment with subprocesses. Where someone that immediately wants to abstract things says (This is from philip's great Message-Id matching recipe) dq = '"' # (literal) double-quote bw = "\\" # (literal) backwhack atom = "[-!#-'*+/-9=?A-Z^-~]+" word = "($atom|$dq([^$dq\]|$bw.)*$dq)' local_part = "$word($s\.$s$word)*" $s<$s$local_part... # ignore comment here ....abstraction: It makes code clearer when you break it to manageable parts, which possibly surfaces reusable parts. It also makes thing look simpler, and enables even novices to understand what's going on there. After we're not connected to the net anymore, others could possibly understand it too. So, naturally we can't agree with any of the previously mentioned arguments presented for keeping regexp "in pure native format". o Although you won't maintain it, it's an example for others. What you post first, people will save it to their mailboxes and circulate elsewhere in the net: "Hey, I've saved this, try it" o You can write cryptic regexps or break them into parts where the whole looks much simpler. Consider novice's welfare :-) This has nothing to do with the "It never changes in my lifetime". o The speed penalty imposed by additional variables is not something we can measure in practice. CPU won't even hiccup. An extra `formail' call in your recipes is 10x as expensive as 100 variables. (I don't know how to measure that, but launching a shell and creating a process is a much more expensive task). o Cluttering the env process? C'm on. That won't matter either. No outside process uses lowercase environment names, or then it must be real special program. So called "cluttering" of environment space is also no-issue. CPU won't even get a hiccup for that. 8.2 Matches are not case-sensitive Okay, okay; if you read the manual you knew that already. But sometimes someone with years of experience with Unix may take it for granted that procmail would be case-sensitive as the rest of the unix tools are. Use the `D' flag to turn on case-sensitivity. 8.3 Procmail uses multiline matches Procmail uses multiline matches by default. This means that ^ and $ match a newline, even in the middle of a regexp. Now you know this, you can easily interpret e.g. `$[^>]' as: `a newline followed by a line not starting with a `>'. If you put a '$' after the '\/' match token then procmail will include the matched newline if there's one there. Solution? Don't put a dollar sign there unless you really want a newline, use period that matches all but newline: :0 B * ^Search-string: \/.+ 8.4 Headers are folded before matching If you have a header that continues on separate lines, you don't have to worry about the linefeeds. Procmail silently folds the header onto one line, before matching it Received: from unknown (HELO Desktop01) (208.11.179.72) by palm.bythehand.net with SMTP; 4 Dec 1997 23:29:09 -0000 :0 # note, match on continuation line * ^Received:.*bythehand\. 8.5 Improving Space-Tab syndrome Procmail doesn't know about standard escape codes like `\t' and `\n' or [\0x00-\0x133]: # Not what you think # You have to write: space + tab [ \t] [ ] But using the space+tab is not very readable and it's a very error prone construct. I suggest using the following to improve the readability: WSPC = " " # whitespace = space + tab SPC = "[$WSPC]" # regexp whitespace, the short name # SPC was chosen because you use this # a lot in condition lines. NSPC = "[^$WSPC]" # negation of whitespace # match anything except space and tab *$ var ?? $NSPC # match anything ecxept space and tab and newline *$ ! var ?? ($SPC|$) But you cannot use newline inside brackets. WSPCL = " "' ' # Won't work although WSPCL definition is correct. *$ var ?? [$WSPCL] Instead use variable syntax: SPCNL = "($SPC|$)" # space + tab + newline If you absolutely need a range of characters, see if you have `echo' command in your system to define variables like this: NUL_CHAR = `echo \\00` DEL_CHAR = `echo \\0177` REGEXP_NON_7BIT = "[^$NUL_CHAR-$DEL_CHAR]" 8.6 Handling exclamation character [philip] you do need the first backslash, to keep procmail from considering the backslash as a request to invert the sense of the match. For example, these two conditions are equivalent: * ! 200^1 foo * 200^1 ! foo Therefore, a leading '!' must either be backslashed, enclosed in either parens or brackets (I suspect that parens would be more efficient), or prefaced with an empty pair of parens. I would recommend writing the condition with one of these: * 200^1 \!!!! * 200^1 ()!!!! * 200^1 (!!!!) 8.7 Rules for generating a character class In a "character class" (things between "[" and "]"), metacharacters don't need to be escaped. Well, a backslash is an exception. e.g. [$[^\\] would match any one of the literal characters dollar, opening bracket, caret, and backslash. o To match "])" use [])] o To match "[(" use [[)] o To include a literal ^ must not be first o To include a literal - must be first, last or \- o To include a literal \ you must use \\ o To include a literal ] must be first o To include a literal [ ( ) or $ just use it anywhere [elijah] If you are inverting a character class "first" means just after the(^). So the character class that contains everything but ] ^ and - must look like this: [^]^-] [david] What if I want literal $ inside bracket? A $ inside brackets, unless it begins a variable name and the "$" modifier is on, always means a literal dollar sign. It cannot mean a newline if it appears inside brackets. A good way to keep it exempt from "$" interpretation is to put it last inside the brackets (unless one also need to include a literal hyphen and one can't put the hyphen first; then you'll need to escape the dollar sign with a backslash and put the hyphen last -- well, you could alternatively escape the hyphen, I guess), because procmail knows that "$]" cannot possibly be a reference to a variable. General guideline: o ($) always matches a newline, with or without "$" interpretation; o [$] always matches a dollar sign, with or w/o "$" interpretation; 8.8 Matching space at the end of condition [david] If you need to have tab or space at the end of condition line you can use these: * rest of string .* * rest of string[ ] * (rest of string ) * rest of string () * rest of string( ) # I prefer this one [philip] From my looking at the source, the last two should be equal in efficiency, and except for a trace difference in regcomp time, should match at the same speed as a solitary trailing blank. The character class version [ ] will be slower. Of course, I suspect that neither you nor your sysadmin will ever notice the difference in speed, and given that 99% of all systems are I/O bound and not CPU bound, the system is incredibly unlikely to notice either. I can't complain though, as I also go to various extremes to seek out every last bit of possible performance. Ah well. The first one would be slower yet, though perhaps no slower than the bracket form. 8.9 Beware leading backslash I am trying to come up with a procmail recipe that among other things should have the condition 'body does not contain a particular word'. Here is what I tried: * ! B ?? \ [david] You have fallen into the leading backslash problem, If the first character of a regexp is a backslash, procmail takes it as "end of leading whitespace" and strips it. What you coded means "a less-than sign, then the word, then any non-word character." (It also prevents the less-than sign from being taken as a size operator.) Unless the non-word character immediately to the left of the word was a less-than sign, that regexp would fail (and thus the condition would pass). Try this: * ! B ?? ()\ This would work too: * ! B ?? \\ but in a casual reading it would look like "literal backslash, less-than sign, the word, word boundary character," so we on the list generally recommend the empty parentheses. Do note that the difference in meaning of \< and \> in procmail (where they must match a non-word character) from their meaning in perl and egrep (where they match the zero-width transition into and out of a word respectively) does not come into play here. Because procmail's \< and \> can match newlines (both real and putative), it rarely is a factor. It's a problem only when a single character has to serve both as the ending boundary of one word an also the opening boundary of another. Well, it's also a problem when you have one as the last character to the right of \/, but that's easily solved. 8.10 Correct use of TO Macro o `TO' is not a normal regular expression; it is a special procmail expression that is designed to catch any destination specification. For details, see the miscellaneous section of the `procmailrc(5)' man pages. o Prefer `TO_' instead of `TO' if you have new procmail. `TO_' is better because TO used to be too loose o Please remember to write `^TO', with the anchor in it. o Do not put a space between the caret (^) and the word `TO' in `^TO'. o Do not put a space between the `^TO' and the text that you are matching on; it must be `^TOtext' If this bothers you, you can use `TO()text' instead to get better separation of text. o Both letters in `TO' must be capitalized. 8.11 Procmail's regexp engine [philip] procmail's regexp engine has no special optimization for anchoring against the beginning of the line. Most program that have such an optimization have it because they need the line distinction for other reasons (for example, grep by default prints the entire line containing a match). Procmail has no such other reason, so it treats newline like any other plain character in the regexp. There should be no speed difference as long as procmail can say: "the first character I see must be a 'foo'". Note that case insensitivity is handled by making everything lowercase, so a letter being first doesn't bring in the spectre of character-classes or anything like that. .> recipe may have just changed the size of the head, procmail .> cannot keep a byte-count pointer nor a line-count pointer to .> where the body begins but must scan through the head to find the .> blank line at the neck before it begins a body search. Procmail does this when it reads in the head, not when it goes to search the body, so that cost can't be avoided. Let me repeat; that searching the body is no slower than searching the header, if we forget the minimum impact of the size of these two. 8.12 Procmail and egrep differences [By david] o ^ and $ are non-zero-width and anchor to real or putative newlines (rather than to the zero-width start and end of a line); o An initial ^^ or a final ^^ anchors to the opening or closing putative newline respectively; o ^ and $ in the middle of a procmailrc regexp match to an embedded newline (and must be escaped to match to a caret or a dollar sign); o \< and \> are non-zero-width and match to a character that wouldn't be in a word (or to a real or putative newline) [rather than to the zero-width transition into or out of a word]; it always matches one non-word character. It will fail when there is no whitespace after the colon. This is rather pathological but still perfectly compliant with RFC822. For this reason, you should use (.*\<)? instead of just .*\< after the colon that terminates a header field name: ^Subject:.*\ # Wrong ^Subject:(.*\<)?humor\> # Right, notice ? o *, ?, and + in the absence of \/ are stingy rather than greedy, and that generally won't matter, but in the presence of \/ they are stingy to the left of \/ and greedy to the right of \/, while in most applications the leftmost wildcard on a line is the greediest and greed decreases from left to right. 8.13 Understanding procmail's minimal matching (stingy vs. greedy) ...I want to have a procmail recipe that will save certain mail to folders where the folder name (always a number) is specified in the subject. :0 : * ^Subject: *\/[0-9]* $HOME/Mail/$MATCH [philip]...and this won't quite work. For a subject with a space after the tab, the '*' on the left hand side will be matched minimally (zero times), and then the stuff on the right hand side will be matched maximally, but starting at the space still, which will match nothing. This is a case were procmail's minimal matching can cause massive confusion and frustration. The solution is usually the following: FORCE THE RIGHT HAND SIDE TO MATCH AT LEAST ONE CHARACTER By Changing the recipe to: :0 : * ^Subject: *\/[0-9]+ $HOME/folders/$MATCH it'll work, because then the left hand side will have to match all the way up to the first digit (but not the digit itself). If you follow the rule in caps then you'll almost always be able to ignore procmail's weirdness in this area. [david] And examine how procmail matches "Subject: Keywords 9999" * ^Subject:.*Keywords.*\/[0-9]* procmail: Match on "^Subject:.*Keywords.*\/[0-9]*" procmail: Matched "" The right side was as greedy as it could be; the problem is that we seem to expect greed on the left as well. MATCH is set to null, in contrary to our expectation. It is not a bug but rather a frequently misunderstood effect of the way extraction is advertised to operate. Remember that only the right side is greedy; the left side is stingy, and left-side stinginess takes precedence over right-side greed. Extraction is implemented this way: the entire expression, left and right, is pinned to the shortest possible match; then the division mark is placed and the right side is repinned to the longest possible match starting at the division. The tricky part is to remember that the division is marked during the stingy stage. If the expression is ^Subject:.*Keywords.*\/[0-9]* and the text is Subject:Keywords9999 then the shortest possible match to the entirety is Subject:Keywords because ".*" and "[0-9]*" both match to null. Then the division mark is placed on the space after "Keywords" and procmail looks for the longest possible match to [0-9]* starting with that space. That, again, is null, so MATCH is set to null. We see that it works as expected if regexp is changed to this: ^Subject:.*Keywords.*\/[0-9]+ That is a whole other ball of wax. Now the shortest match to the entirety is Subject:Keywords9 and the division mark is placed at the 9. Then procmail refigures the longest match to the right side starting at the division mark and sets MATCH=9999. However here ^Subject:.*Keywords\/.*[0-9]* the second ".*" would have reached not just up to the digits but through them to the end of the line. MATCH would contain the rest of all of it matched to ".*" plus null match "[0-9]*". [for curious reader] Given line Subject: Keywords 9999 the second, which differs only by inserting the extraction marker, would not match and would not set $MATCH: ^Subject: Keywords *9999 # matches ok ^Subject: Keywords *\/9999 # won't ! because the left side would be matched to "Subject: Keywords" and the immediately following text, " 9999", did not match the right side. It would actually make the condition fail and keep the recipe from executing. It took a lot of circuitous coding to allow for not knowing in advance exactly how many spaces there would be before the digits. Call it counterintuitive, but it's not a bug. General advice: always make sure that the right side cannot match null or that the last element of the left side cannot match null. Or in other words: force the right-hand side of the \/ to match at least one character. 8.14 Explaining \/ and ()\/ `MATCH' strips all leading blank lines in 3.11pre7 [david] \/ with nothing to the left of it means "one foreslash". To start a condition with the extraction operator, use ()\/ or \\/; the latter looks counter intuitively like "literal backslash and literal foreslash" (as it would mean if it appeared farther along in the regexp), so most of us prefer the former. *$ var ?? $s+\/$d+ # ok, \/ in the middle *$ var ?? \/$d+ # Wrong, when \/ is at the beginning *$ var ?? ()\/$d+ # No ok, () at the beginning 8.15 Explaining ^^ and ^ [philip] Procmail doesn't think *lines* when it matches; but it concatenates all lines together and then runs the regexp engine. This may be a bit surprising, but consider the following where we want to discard any message that is likely a html advertisement # Body consists entirely of html code # something which'll match any message which has "" # in the body :0 B: *$ $s* html.mbox The condition test is applied to the entire body. If you want to limit it to match only against the beginning of the body, you have to say so using the ^^ token, as you discovered. A simple line anchor (^ or $) just says that there must be a newline (or the beginning or end of the area being searched) at that particular point in the text being matched. notice the leading anchors below. # trap spam where the *very* first line of the body started with # :0 B: *$ ^^$s* html.mbox What, exactly, does "Anchor the expression at the very start of the search area..." i.e. the ^^ ? [dan] Technically, an opening ^^ anchors to the putative newline that procmail sees before the first character of the search area (and a closing ^^ anchors to the putative newline that procmail sees after the end of the search area). When the search area is B, that is a point equivalent to the second of the two adjacent newlines that enclose the empty line that marks the end of the head. The reason I'm bringing that up is this: if there are multiple empty or blank lines between the head and the body, ^^ will mark the start of the second of those lines, not the start of the first line of the body that contains some text. So if you want to test whether is the first printing text in the body, even if it is not necessarily flush left on the very first line, you might need a condition like the following, where there is space/pipe/tab/pipe/dollar. *$ B ?? ^^$SPCNL* 8.16 ANDing traditionally Erm, you knew this already if you read the man pages. Stacking condition lines one after another does the AND operation, where all of the conditions must be present: * condition1 * condition2 8.17 ORing traditionally Here is simple OR case. There are some cases where it's impossible to OR conditions with this style. [philip] knows more about those cases. * condition1|condition2 Likewise, two exit code tests can often be ORed like this * ? command1 || command2 But there are many situations where two tests cannot be ORed by combining them into one condition: o a regexp search of one area ORed with a regexp search of a different area o a positive regexp search [i.e., for a match to its pattern] ORed with a negative regexp search [i.e., for the absence of any match to its pattern] o an exit code condition ORed with a regexp search condition o an exit code condition seeking success ORed with an exit code condition seeking failure o a size test ORed with anything else (even another size test) How can I make OR conditions that all use the SAME action? I want to be able to test for a number of variants on certain requests, all in one block. [hal] Yes, this can be easily done CASE = "" :0 * case 1 tests { CASE = 1 } :0 E * case 2 tests { CASE = 2 } :0 * ! CASE ?? ^^^^ { # real work, perhaps with explicit tests on CASE } Case study: Finding text from header and body [david] In addition to the standard ways of coding OR, here's a special one for searching the subject and the body for a given word in either: * HB ?? ^^(.+$)*(Subject:(.*[^a-z0-9])?|$(.*\<)*)remove\> If the string doesn't have to be preceded by a word border, it gets a little simpler: * HB ?? ^^(.+$)*(Subject:.*|$(.|$))*string 8.18 ORing and score recipe Once any of the conditions match, the score gets a positive value and the recipe succeeds. Idea by Erik Selke [era comments] ...allegedly the scoring system is going to cost you more than plain old regex matching. Floating-point math and all that, even if you use extremely simple scoring. Thus, it would probably be slightly more efficient to do it the De Morgan way. * 1^0 condition1 * 1^0 condition2 We can now write the previous case stydy (HB ORing traditionally) with scores. I was tempted to write it like this, when [david] told me the following. * 1^0 H ?? match-it * 1^0 B ?? match-it [david] That will work, but it isn't the best way to do ORing, because if a match is found to the first condition procmail still takes the trouble to test the second one. Better, use the supremum score on each condition: $SUPREME = 9876543210 *$ $SUPREME^0 first_condition_to_be_ORed *$ $SUPREME^0 second_condition_to_be_ORed * ... etc. ... *$ $SUPREME^0 last_condition_to_be_ORed Upon reaching the supreme score, procmail will skip all remaining weighted conditions on the recipe, deeming them matched. Since all conditions on this recipe are weighted, once procmail finds one matched condition it will skip the rest and execute the action. 8.19 ORing by using De Morgan rules [Tim Pickett ] I thought I'd point out that there are a few ways to do a logical OR of conditions. Someone posted a solution here that involved using procmail's scoring system, but I figured you could do it without scoring by taking advantage of De Morgan's rule: a or b is same as not(not a and not b) or mathematically: a || b <=> !( !a && !b ) Here's a way to do ORing :0 * ! condition1 * ! condition2 { } # official procmail no-op :0 E action_on_condition1_or_condition2 9.0 Variables 9.1 Setting and unsetting variables You have already set variables with the "=" syntax. Variable names are case sensitive: `var' is different from `VAR' VAR = /var/tmp # directory VAR = "this" # literal VAR = 1 VAR = $FOO # another. VAR = "$VAR at" # combined with previous value Unsetting a variable is done like this VAR # kill variable. VAR= # same but with old style VAR = "" # Variable is said to be "null" now And you can put multiple assignments on the same line VAR=1 VAR=2 VAR=3 Examine the following, which are all equivalent. The backticks will not require a shell in the absence of any `SHELLMETAS' so neither of these will spawn a shell # _case1_: We Don't care if file exists this time... VAR = `cat file` # _case2_: The use of {} is considered "modern" :0 * condition { VAR = `cat file` } # _case3_: oldish, and procmail specific and errors have # been reported if you use this construct. # Note: There must be no space in "VAR=|" :0 * condition VAR=| cat file 9.2 Variable initialisation and sh syntax Procmail borrows some sh syntax for variable initialisation. Note that sh's ${var:=default} and ${var=defaultvalue} syntaxes are not available in a procmail rcfile. o VAR1 = ${VAR2:-value} sets VAR1 to VAR2 if VAR2 is set and non-null, and sets VAR1 to default "value" otherwise o VAR1 = ${VAR2-value} sets VAR1 to VAR2 if VAR2 is set, and sets VAR1 to default otherwise o VAR1 = ${VAR2:+value} sets VAR1 to "value" if VAR2 is set and non-null, and sets VAR1 to VAR2 otherwise. o VAR1 =${VAR2+value} Sets VAR1 to "value" if VAR2 is set and sets VAR1 to VAR2 otherwise. And here are the classic usage examples VAR = ${VAR:-"yes"} # set VAR to default value "yes" VAR = ${VAR+"yes"} # If VAR contains value, set "yes" Ever wondered if this calls `date` in all cases? VAR = ${VAR:-`date`} No, procmail is smart enough to skip calling `date' if VAR already had value. It doesn't evaluate the whole line. Below you see what each initialising operator does. Study it carefully VAR = "" # Define variable VAR = ${VAR:-"value1"} # VAR = "value1" VAR = "" VAR = ${VAR-"value2"} # VAR = "" VAR = "" VAR = ${VAR:+"value3"} # VAR = "" VAR = "" VAR = ${VAR+"value4"} # VAR = "value4" # Note these: VAR = "val" VAR = ${VAR:+"value3"} # VAR = "value3" VAR = "val" VAR = ${VAR+"value4"} # VAR = "value4" VAR # kill the variable VAR = ${VAR:-"value1"} # VAR = "value1" VAR VAR = ${VAR-"value2"} # VAR = "value2" VAR VAR = ${VAR:+"value3"} # nothing is assigned VAR VAR = ${VAR+"value4"} # nothing is assigned And if you want to choose from several initial values, you might use the recipe below instead of the standard var = ${var:-"value"}. :0 * VAR ?? ^^^^ { # no value (or was empty), set default value here based on # some guesses VAR = "base-default" :0 * condition { VAR = "another-default" } ...more conditions.. } You could also use equivalent, but less readable condition line in previous recipe: *$ ${VAR:+!} It works, because if variable contains a value the line expands to * ! Where "!" is the procmail "false" operation. One more way to do the same would be, that we require at leastone character to be present. You could use also regexp (.), which would require at least one character to be present, but you might not like matching pure spaces. * ! VAR ?? [a-z] 9.3 Testing variables If possible, perform positive tests, rather than negative, like below: * ! TEST_FLAG ?? yes Alternative with a positive test: * TEST_FLAG ?? no To my opinion, this is more readable. You're free to disagree with me at this point, but all in all, it's nicer to look at code that has as few ! flags as possible, especially in variable tests. [philip] The following fails if the variable is unset or null. * variable ?? (.) That was why I'd be better off to use *$ variable ?? $NSPC Or * variable ?? (.|$) to require that *variable* contain at least one character. But neither is a way to check whether a variable is set or not, because each treats a null variable the same as an unset one. This is the best way I know to check whether a variable is set or not: *$ ! ${VAR+!} [] Here is yet another way to test if variable is set and if it isn't, sets it to a default value. :0 *$ ! VAR^0 { VAR = "value" } 9.4 What does $\VAR mean? [era and david] Procmail 3.11, $\VAR will escape regex metacharacters. It should produce a suitably backslash-escaped expression for Procmail's own use. In addition $\VAR will always begin with leading empty parentheses. You can't pass the $\VAR construct to shell programs, because there is that leading parenthesis. Here's a recipe to standardize the regexp. You can pass SAFE_REGEXP to an external programs like `sed'. PROCMAIL_REGEXP = "$\VAR" :0 * PROCMAIL_REGEXP ?? ^^\(\)\/.* { SAFE_REGEXP = "$MATCH" } [era] Note that this is slightly inexact; Procmail will backslash-escape according to Procmail's needs, not sed's. For example, Procmail doesn't think braces are magic (although that would be nice to have in Procmail as well) whereas many modern variants of sed do. 9.5 Common pitfalls when using variables Procmail is picky and forgives nothing. Here are some of the favourite mistakes one can make: $EMAIL = "foo@site.com" # Done Perl lately? Remove that $ # Erm, this is ok, but many procmail recipe writers want to # take extra precautions and include the regexps in parentheses. # So, maybe (yabba|dabba|doo) would be more safe REGEXP = "yabba|dabba|doo" * Subject:.*$REGEXP # Hey, you need the "*$ Subject..." *$ $REGEXP ?? hello # surely you meant '* REGEXP ?? hello' 9.6 Quoting: Using single or double quotes Pay attention to this: VAR = "you" NEW = 'hey "$VAR"' # won't extrapolate $VAR; you get literal NEW = "hey '$VAR'" # extrapolates to: hey 'you' You can even combine separate words together VAR = "1 ""and"" 2" # same as "1 and 2" Don't let these many quotes disturb you, just count the beginning and ending quotes. Superfluous here, but you may need some similar construct somewhere else. VAR = '1 '"'"'and'"'"' 2' # same as: 1 'and' 2 [david] Beware forgetting quotes, like when you'd do SENDMAILFLAGS = -oQ/var/mqueue.incoming -odq Procmail translates `!' into | "$SENDMAIL" "$SENDMAILFLAGS" as the procmailrc(5) man page warns us. By the rules of sh quoting, that means that shell sees only the first switch % sendmail -oQ/var/mqueue.incoming My suggestion: since you need a soft space inside `$SENDMAILFLAGS', use the quotes when you define `$SENDMAILFLAGS' but do this instead of using the `!' operator for forwarding: SENDMAILFLAGS = "-oQ/var/mqueue.incoming -odq" [Walter Haidinger ] Here's yet another approach: deliver messages from procmail directly to mailboxes in all those users' homes. No sendmail involved, _much_ lower loads. :0: * /var/spool/mail/someuser [philip] Assuming that "someuser" is an actual user in the password file (I haven't been following this thread, some maybe that isn't true here), then the following is probably better: Walter Haidinger comments on this recipe: I'm happy to announce that this works *really* well. No harm is done to the system-load anymore. What a relief! :0 w * conditions |procmail -d someuser That lets procmail's very tricky "screenmailbox()" routine take care of bogus mailboxes in a secure fashion. Is that as safe as forwarding? Does another sendmail delivering to /var/spool/mail/someuser use the same locking mechanism and notice that mailbox is already locked? I don't want to risk a corrupt mailbox. [philip] Sendmail only delivers directly to files through aliases that say things like: whatever: /some/local/file Under normal circumstances, sendmail calls the local mailer to actually store mail in a file, and since that's procmail (right?), there shouldn't be a problem. Also, sendmail 8 does kernel-level locking when it delivers directly. 9.7 Quoting: Passing values to an external program Remember to include the double quotes when you send variables' values to the shell programs. Below you see a mistake, because the content of the SUBJECT is not quoted and thus not available from perl variable $ARGV[1]. :0 * condition | perl-script $SUBJECT # mistake; use "$SUBJECT" There is also another way. If your script can access environment variables (almost all programs can), then you do not need to pass the variables on the command line. Above, the SUBJECT is already in the environment and in perl you can get it. $SUBJECT = $ENV{SUBJECT}; # or "use Env;" and you see $SUBJECT Next, do you know what is the difference between these two recipes? :0 | "command arg1 arg2 arg3" :0 | command "arg1" "arg2" "arg3" You guessed it. The first one quotes the entire command and does not do the right thing, the latter is correct and depending on the content of argN variables. Anyway, play safe and always add quotes. Sometimes you need trickier quoting to to get single quotes around the `arg'. Pay attention to this, because this may be the reason why your grep command doesn't seem to succeed as you expect. # If $GREP "$arg" doesn't seem to work * ? $GREP "'"$arg"'" $DATABASE 9.8 Passing values from an external program External programs cannot set procmail variables directly. Programs must write the values to external files and then read the values from these files. Capturing only one value is easy: var = `command` # capture STDOUT But if a program modifies the body and exports some status information it is trickier. We assume here that the script is controlled by you and that you have added the switch --export-status option which causes the program to print information to a separate file. LOCKFILE = $HOME/.run$LOCKEXT # protect external file writing valueFile = $HOME/tmp/values # modify body, and export status values to external file: one # value in every line # # VALUE1 # VALUE2 # VALUE3 :0 fb | $NICE script.pl --export-status $valueFile values = `cat $valueFile` # Derive values from each line :0 # line 1 *$ values ?? ^^\/[^$NL]+ { var1 = $MATCH } :0 # line 2 *$ values ?? ^^.*$\/[^$NL]+ { var2 = $MATCH } :0 # line 3 *$ values ?? ^^.*$.*$\/[^$NL]+ { var3 = $MATCH } LOCKFILE # Release lock [richard] Alternatively write valueFile from your rc or external program with lines like PARAM1="value for param 1" PARAM2="value for param 2" PARAM3="value for param 3" and read it with INCLUDERC $valueFile Now there is no need to worry about synchronizing the read with the lines, or about adding new parameters, since each is labeled in valueFile. 9.9 Incrementing a variable by a value N [dan, phil and Richard] Here's a recipe for incrementing a variable by a value N. If $VAR is not a number, we get an error. Note that if $VAR + $N is not greater than 0, this recipe will not change the value of VAR if the assignment happens inside braces. You must place the assignment after the closing curly brace. :0 *$ $VAR ^0 *$ $N ^0 { } # procmail no-op VAR = $= 9.10 Comparing values It's too expensive to call the shell's `test' function to do [-lt|-eq|-gt] because you can do the same with procmail. The do-something below is run if SCORE <= MAXIMUM. The recipe simply subtracts SCORE from MAXIMUM and determines if the result is positive. :0 *$ -$SCORE ^0 *$ $MAXIMUM ^0 { .. do-something } [idea by era] it's getting slightly cumbersome if it's between MIN and MAX: :0 *$ $SCORE ^0 *$ -$MIN ^0 { dummy # no-op, just for the LOG :0 *$ -$SCORE ^0 *$ $MAX ^0 { suitable } } Eg. When values are MIN=1, MAX=5, SCORE=4 procmail: Assigning "SCORE=4" procmail: Score: 4 4 "" procmail: Score: -1 3 "" procmail: Assigning "dummy" procmail: Score: -4 -4 "" procmail: Score: 5 1 "" procmail: Assigning "suitable" 9.11 Strings: How many characters are there in a given string? # 1998-06-23 PM-L [walter] :0 * 1^1 VAR ?? . { } LENGTH = $ 9.12 Strings: How to strip trailing newline. Suppose you have used regexp, which left newline($) in the `MATCH'. If you wonder why the recipe works, remind yourself that regexp operator "." never matches a newline. :0 * VAR ?? ^^\/.+ { VAR = $MATCH } 9.13 Strings: deriving the last N characters of a string. # 1998-06-23 PM-L [walter] Note the use of # the $ sign below to anchor to end-of-string... # # For last 2 characters use * VAR ?? ()\/..$ # For last 5 characters use * VAR ?? ()\/.....$ :0 # Last character * VAR ?? ()\/.$ { TAIL = $MATCH } 9.14 Strings: Getting partial matches from a string. [dan] Getting a match to the right is quite easy with procmail's `match' operator. VAR = "1234567890" :0 * VAR ?? ()\/3.* { result = $MATCH # now 34567890 } but deleting 2 characters from the end is nearly impossible without forking an outside process. The cheapest might be `expr' because it doesn't need a shell to pipe `echo' to it (as `sed' would and I believe `perl' would): # by resetting the shellmetas, this will only call # `expr'. If we wouldn't have fiddled with shellmetas, # this would have called two processes: sh + expr saved = $SHELLMETAS SHELLMETAS result = `expr "$VAR" : '\(.*\)..'` # now 12345678 SHELLMETAS = $saved ksh or bash could do it as well: # semicolon to force invoking a shell, actually # first question mark will force a shell already. saved = $SHELL SHELL = /bins/sh result = `echo ${VAR%??} ;` SHELL = $saved Now, if you know that the last two characters will be "90", that's different. Of course, this totally screws up if the third-to-last character is a 9. :0 * VAR ?? ()\/.*[^0] * MATCH ?? ()\/.*[^9] { result = $MATCH # now 12345678 } [jari] Comments: If a shell must be used, then `awk' is a good tool for simple string manipulation. Its startup time is faster that perl's whose overhead is due to internal compilation. `awk' also consumes less recourses overall than `perl'. Following will only work if VAR is a string of continuous block of characters. (ARGV[1] can be used) saved = $SHELLMETAS SHELLMETAS VAR = ` awk 'BEGIN{ v = ARGV[1]; \ print substr(v,1,length(v)-2); exit }' \ "$VAR" \ ` SHELLMETAS = $saved This version requires _some_ file, any file, so that we get awk started. In the previous code all the work was done in the BEGIN block and no file was ever opened. saved = $SHELLMETAS SHELLMETAS VAR = ` awk '{print substr(v,1,length(v)-2); exit }' \ v="$VAR" /etc/passwd \ ` SHELLMETAS = $saved [dan] comments awk: `expr' is sure to be a smaller binary than awk for procmail to fork, and it needs much less command-line code to do this job. Note also that one still has to diddle with SHELLMETAS to avoid a shell, because the awk code contains brackets; thus it doesn't replace all. There is also a way to remove words from the end of string by procmail means if the strings are separated by same separator. Let's use the word this-mailing-list-request which we would like to shorten to this-mailing-list. [david] presented the recipe 1998-06-16 in PM-L. VAR = "this-mailing-list" # 1) if there is match at the end ending to these words # 2) Get everything up till last match and store it to MATCH # 3) Read MATCH, but exclude last dash "-" :0 * VAR ?? -(owner|request|help)^^ * VAR ?? ^^\/.*- * MATCH ?? ^^\/.*[^-] { VAR = $MATCH } 9.15 Strings: Procmail string manipulation example [1998-06-23 PM-L walter] ... Now we get to apply these formulas to strip the last character off a string. It gets a bit ugly for special cases. I've deliberately chosen a worst-case scenario. VAR = "Testing 012301230111" RC_APPEND = $PMSRC/pm-myappend.rc :0 * VAR ?? ()\/.$ { TAIL = $MATCH # last character of VAR "1" # Get the longest match that does not end in the TAIL character :0 *$ VAR ?? ()\/.*[^$TAIL] { HEAD = $MATCH # now "Testing 012301230" # if the last two or more characters in VAR are # identical, they all get chopped, oops :0 * -1^0 * 1^1 VAR ?? (.) * -1^1 HEAD ?? (.) { dummy = "tooshort" INCLUDERC = $RC_APPEND } } } result = $HEAD # "Testing 01230123011" # ........................................ pm-myappend.rc # LENGTH(HEAD) plus 1 SHOULD equal LENGTH(VAR). That is # not the case when the last 2 (or more) ending # characters are identical. in that case, call appendrc # recursively to stick back an appropriate number of # TAIL characters. :0 * -1^0 * 1^1 VAR ?? (.) * -1^1 HEAD ?? (.) { HEAD = "$HEAD$TAIL" INCLUDERC = $RC_APPEND } 9.16 How to raise a flag if the message was filed FILED = ! # ! is procmail "false" :0 c: # We process the message more * condition foo :0 a { FILED # Kill variable } ... :0 # Stop if previous cases filed the message *$ $FILED { HOST = "_done_" } Or alternatively: procmail automatically sets `LASTFOLDER' if it delivers message to mailbox. LASTFOLDER # kill variable :0 c: * condition foo :0 c: * condition bar ... et cetera ... :0 * ! LASTFOLDER ?? ^^^^ # Or ${LASTFOLDER+!}! { HOST = "_done_" # Force procmail to stop } 9.17 Dollar sign in condition lines. #todo, check this recipe This doesn't seem to work for me... * ^TO()$\foo@bar.com [david] An unescaped dollar sign later in the line represents a newline, so what you have there is searching for the following: . An expression that matches the expansion of the ^TO token (which is anchored to the start of a line by its definition), followed by . A newline, followed at the start of the next line by . "foo@bar" [the backslash escapes the f, which didn't need escaping], followed by . any character that is not a newline (the period is unescaped), and finally . "com". Try this instead: *$ ^TO()$\foo@bar\.com #todo: the dollar seems exactly the same in the above two #todo Examples: are you sure that this is correct? In fact, to avoid matches to things like foo@bar.community.edu, you might want to do it this way: *$ ^TO()$\foo@bar\.com\> 9.18 Finding mysterious foo variable I have my fellow worker's procmail code and he uses a variable FOO that I can't find in his code anywhere. It's not a shell variable either, because it's literal. Where does it come from? Your procmail runs /etc/procmailrc when it starts, please check that. It may define some common variables already for all users. 9.19 Storing code to variable One way to run complex code in a procmail recipe is first to store it in a variable. Idea by [era]. You could do this in a separate shell script too. The following example reads URLs from the body of a message: the URLs have been put to separate lines and some special Subject is used to trigger the dumping of the html pages: # Code by [era] # COMMAND='while read url; do case "$url" in *://*) lynx -traversal -realm -crawl -number_links "$url" | $SENDMAIL $LOGNAME ;; esac done' # Notice the trailing semicolon after `eval' ! :0 bw * ^Subject: xxxxx | eval "$COMMAND" ; If you want to run the code inside the nested block, then look carefully, there are double quotes around the command in backticks. If you leave double quotes out, then each word in SH_CMD would be interpreted separately: $SH_CMD = '$echo "$VAR" >> $HOME/test.tmp' :0 * condition { # condition satisfied; run the given shell command # and do something more. dummy = `"$SH_CMD"` ..rest of the code.. } A similar construct works for message echo-ing too: MESSAGE='Thank you so much for your message. Unfortunately, the volume of mail I receive .... (blah blah blah). If your matter is urgent, try calling +358-50-524-0965. ' :0 hw * ! ^X-Loop: moo$ | ($FORMAIL -rt -A "$MY_XLOOP"; echo "$MESSAGE") | $SENDMAIL 9.20 Getting headers into a variable. [david] Here are several ways to get the entire header into a variable: HEADER = `$FORMAIL -X ""` # The space after the X is vital. HEADER = `sed /^$/q` # also writable as HEADER=`sed /./!q` :0 h HEADER=|cat - will save the entire header into one variable. It has to be smaller than $BUFSIZE, though. This way might work as well, and will require no outside processes if it does: :0 * ^^\/(.+$)*$ { HEADER = $MATCH } 9.21 Converting value to lowercase If you know that a word belongs to set of choices, you can do this inside procmail LIST = ":word1:word2:word3:word4" # Colon to separate words WORD = "WORD1" :0 *$ LIST ?? :\/$WORD { WORD = $MATCH } But if you don't know the word or string beforehand, then this is the generalized way: [idea by era and david] :0 D * WORD ?? [A-Z] { WORD = `echo "$MATCH" | tr A-Z a-z` } 10.0 Suggestions and miscellaneous 10.1 Speeding up procmail o Use absolute paths to take the burden of searching binary along path from shell: Use $FORMAIL variable abstraction. $FORMAIL = "/usr/local/bin/formail" :0 fhw | $FORMAIL -I "X-My-Header: value" o Multiple `echo' commands that spread many lines can be converted to single echo command if \n escape is supported. You usually see these in autoresponders echo "........."; \ echo "........."; \ echo "........."; --> echo ".........\n" \ ".........\n" \ ".........\n"; o You can avoid multiple and possible expensive FROM_DAEMON tests by caching the result at the top of your .procmailrc. You can now use variable $from_daemon like the big brother FROM_DAEMON. The same idea can be applied to FROM_MAILER regexp. If you have *pm-javar.rc*, it already defines variables `$from_daemon' and `from_mailer' exactly like here: from_daemon = "!" :0 * ^FROM_DAEMON { from_daemon = "!!" # double !! means "OK" } :0 *$ ! $from_daemon { ..do-it.. } o Count the backticks and you know how many shell calls procmail has to launch. See if you can minimize them and use some procmail code instead. o ^TO and other macros are expensive, see if you can use simple Header:.*\ instead. Well, it's not clear if this gives you much speed advantage. o Don't call "$FORMAIL -xHeader:" every time you need a header value, consider if it suffices to use `match' operator \/. o You can minimize the calls to only one `formail' if you add many headers along the way: See formail usage tips in this document o Searching body is expensive, simply because it contains more text. There isn't much to do about this, because you use `B' anyway when you need it. o See if you can move some tasks to your .cron file. procmailrc is not meant for those purposes. Instead of calculation daily values every time in procmail, let cron do that at 04:00 or 21:00. Don't run cron at midnight if you can, because everybody else is running their crons at the same time. If "logical" date change time can be used (when you arrive to work, when you leave the work), use it in cron jobs. o [philip] Setting `LINEBUF' permanently to a big value slows procmail down. o Remove all calls to `perl' and use programs that are nicer to the system (If you just call command line perl, there is probably an equivalent alternative with `awk' `tr' `sed' `cut') o Examine each shell command and see if you do need `SHELLMETAS.' If you can set `SHELLMETAS' to empty, this saves calling "sh" for each invocation of the external command. 10.2 See the procmail installation's examples Did you remember to look at the examples that come with procmail? If not, it's time to give them a chance to educate you. Here is one possible directory you could take a look. Ask from your sysadm if you can't find the directory where to look into. % ls /usr/local/lib/procmail-3.11pre7/examples/ Or if you're really anxious to get on your own, try this. The directory /opt/local is for HP-UX 10 machines and the *forward* contains example how to define your `.forward' for procmail. % find /opt/local/ -name "forward" -print If the find succeeded and found the file, then you know where the procmail files installation directory is. 10.3 Printing statistics of your incoming mail If you keep the procmail log crunching, it will record to which folder the messages was filed. There is program `mailstat' which can process the procmail.log file and print nice summary out of it. If you generate the summary at midnight and clear the log, you get pretty nice per day/per folder traffic analysis. # -m merges all error messages into a single line % mailstat -km procmail.log 10.4 Storing UBE mailboxes outside of quota I want to store spam outside disk space. Problem: if I tell procmail to deliver to, say, /tmp/spam.box, it does so just fine (according to the log). Unfortunately, it delivers to /tmp on the mail host which I cannot access. spam.box doesn't appear in the /tmp directory of the shell machine when procmail is invoked for incoming mail. [philip] Under the most likely configuration of sendmail in this situation, it is impossible to have procmail invoked by sendmail on the shell machine: sendmail is probably set to just forward all mail to the designated mail delivery machine. There are other options: you could temporarily store the mail in your account, then have a cronjob on the shell machine that reprocesses the message. That would probably be more efficient than having each message trigger an rsh to the shell machine. If you actually get enough spam that it's pushing against your quota, then the rsh is too expensive -- use a cronjob that invokes something like: cd your-maildir && lockfile spam.lock && test -s spam && { cat spam >> /tmp/spam.box && rm -f spam spam.lock || \ rm -f spam.lock; } WARNING: the above assumes the following: o everything in your-maildir/spam is spam and belongs in /tmp/spam.box o no further filtering of the messages is necessary: they just need to be moved (it actually treats everything in the your-maildir/spam as a single message and uses procmail as a reliable copy command, thus the `DEFAULT' assignment as the use of /dev/null as a empty procmailrc) o /tmp/spam.box is a not a directory If the latter two of those conditions isn't true OR IF THEY MIGHT CHANGE then you should use `formail' `-s' to break the message apart and invoke procmail on each one separately. [era] Many sites cross-mount directories for various reasons. /tmp is always local but /var/tmp might be cross-mounted between the login host and the mail host; another one to try is /scratch -- and if all else fails, ask your admin to set up an NFS share for this purpose. 10.5 Using first 5-30 lines from the message [era] The regex to grab few lines (or all of them, if there are less than fifty) is not going to be very pretty, but it saves launching an extra process. :0 B * $ ^^$SPCNL*\/$NSPC.*$(.*$)?(.*$)? ... etc, the rest of the lines { toplines = $MATCH } The skipping of whitespace at the beginning of the message is of course not necessary. You should probably set `LINEBUF' reasonably high if you grab many lines, say 30: 80*30 = 2400 bytes; probably setting it to 8192 or 16384 is a good idea, depending how much you want to match. The above gets ugly quickly, so # But if N=30, sed ${N}q if you don't have head :0 Bi { toplines = `head -$N` } :0 a * toplines ?? pattern { ...do-it } 10.6 Using cat or echo in scripts? I have seen a lot of examples that use 'echo', i.e., :0 * condition | echo "first line of message" \ "second ..." \ "et cetera" I started out with spam.rc from "ariel" which got me into the habit of :0 * condition | cat file_containing_message although I note that spam.rc did have one recipe using the echo method. What are the reasons for choosing each method over the other? Here is a comparison table. Choose the one you think is best for you o Echos don't have dependency on an external file: everything is contained in the .procmailrc file. Echos keep all the relevant stuff in one file. Cat's make you maintain multiple files. That's the main reason I lean toward echo's; you may have accounts on several machines. It is easier to be able to copy just one generic .procmailrc between them without having to copy a bunch of messages also. Mostly, though, there's no real difference between the two methods. o Echo is easier to use with variables. o Echo starts many processes, cat only starts one, but this is not always true: In most current Bourne shell implementations, echo is a builtin. This holds true with tcsh too. o The main problem I see with the use of cat is "what happens when you forget the file or destroy it ?". I suggest to, at least, test that the file is readable before catting it. o [richard] An argument against echo is that it is not well standardized, and different versions may exist on the same machine. Some recognize -n, some don't; some recognize embedded metacharacters, some don't.This is an argument in favor of `print'. Print, however, is not a built-in on all systems. The comment on built-ins is pertinent to situations when a shell is spawned. When procmail handles the call directly, it will always look for a stand-alone executable. I guess echo may be better, as long as we are aware of any differences in behavior between built-in and stand-alone versions. 10.7 How to run an extra shell command as a side effect? [jari] I was once wondering what would be the wisest way to send messages to my daily "biff" log file about the events that happened during my .procmailrc execution. This is how [david] commented on my ideas # case 1: print to BiffLog dummy = `echo "message: $FROM $SUBJECT" >> $biff ` [david] Problems you get no locking on the destination file, and unless you put it inside braces you have to run it on every message unconditionally. (Also procmail tries to feed the whole message to a command that won't read it, but the remedies for that don't help very much.) # case 2: We consume delivering recipe and therefor have to use # `c' flag. :0 whic: | echo "message: $FROM $SUBJECT" >> $biff Here it locks the destination file and you can add conditions to it, so it's probably the best. If the head or the body is less than one bufferful, you can limit the unnecessarily written data with `h' or `b', but I think that in most OSes a partial buffer and a full one are the same amount of effort. # case 3: We use side effect of "?" here. Cool, but this # doesn't do $biff file locking thus message order may # not be what you expect. :0 * condition * ? echo message: $FROM $SUBJECT >> $biff { } # procmail no-op We have conditions possible, but there is no locking on the destination file. I'd go with method #2 or a variation thereof: :0 hic: # we don't necessarily need `w' * condition | echo message: $FROM $SUBJECT >> $biff :0 hi: # Or you could use this * condition dummy=| echo message: $FROM $SUBJECT >> $biff [jari] Now, when [david] has explained how various ways differ from each other, I present the recipe where I used the case 3. When I was dropping a message to a folder, I wanted to send a message to my biff log too. The idea is that the drop-conditions have already matched and then we run extra command by using side effect of "?" token. As far as the recipe is concerned, the "?" is a no-op. The pedantic way would have been to add the LOCKFILE around to the recipe, but imagine 50 similar recipes like this...and you understand why the LOCKFILE was left out. It's only necessary if you worry about sequential writing to the biff file. :0 : * drop-condition * ? echo message: $FROM $SUBJECT >> $biff $MBOX 10.8 Forcing "ok" return status from shell script ...the "?" trick only allows running some additional shell commands (`true' command always succeeds) while conditions above have already determined that drop will take place. And you can always make condition to succeed if a misbehaving shell script always returns a failure exit code. * ? misbehaving-shell-script || true [david] If the script *always* returns a failure code, just do this: * ! ? misbehaving-shell-script The more complex case is a script that can return either success or failure but you don't care which; if the drop conditions passed, you want to run the action line. `echo' can also fail if the process lacks permission or opportunity to write to stdout. A more reliable choice is true(1); its purpose in life is to do nothing but exit with status 0. The command `:' is a shell builtin which always returns true status. Not exactly more readable than true(1) "|| :" will save the invocation of true (unless true is built into $SHELL), but procmail will still run a shell. On the other hand, as long as the command itself has no characters from `SHELLMETAS' a weight of 1^1 and no "|| anything" will avoid the shell process as well. However, there is yet a better way to make sure that a failure by the script doesn't make procmail abort the recipe: :0 flags * other conditions * 1^1 ? shell-script action Regardless of the exit status of the script, the condition will score 1 and not interfere with procmail's decision about the action line of the recipe. Weighted exit code conditions behave like this (see the procmailsc(5) man page): * w^x ? command scores w on success or x on failure. * w^x ! ? command scores the same as this: * w^x pattern_that_appears_in_the_search_area_$?_times 10.9 Make your own .procmailrc available to others There is never too much to learn about procmail and the best source is the rc files that people have done. Remember to comment your .procmailrc file well before you put it available. Below is a recipe for sending your .procmailrc upon request. If you want to send anything more that one or two files (many times you want to put other files available too), then please do not use this code but a general file server module. (Note: #REF #procmail_module_list ;Procmail module list;) :0 * ! ^Subject:.Re: * ^Subject:.*send.*procmailrc * ! ^FROM_DAEMON { :0 fhw: | $FORMAIL -rt \ -A "Precedence: junk" \ -I "Subject: Requested .procmailrc"; \ -I "$MY_XLOOP" :0 a hwic | ( cat - $HOME/.procmailrc ) | $SENDMAIL :0 # trash the "Send procmailrc" request /dev/null } 10.10 Using dates efficiently _Note_: See module list, where you will find `date' and `time' parsing modules. You can also parse the date from the first `Received' or `From_' header if it is the same each time in your system. That would be orders of magnitude faster and decreases your system load if you receive lot of mail. Calling `date' in your procmail script _many_ times is not a good idea. Use the `MATCH' as much as possible to be efficient in procmail, like below where we call `date' only once. If you are not in the same time zone as your server, and you want an accurate report of the date, you might amend the invocation to the following: date = `TZ="KDT9:30KST10:00,64/5:00,303/20:00";date "+%Y %m %d"` The basic recipe is here # By [richard] add %H:%M%S if you want these as well :0 * date ?? ^^()\/.... { YYYY = $MATCH } :0 * date ?? ^^..\/.. { YY = $MATCH } :0 * date ?? ^^.....\/.. { MM = $MATCH } :0 * date ?? ()\/..^^ { DD = $MATCH } TODAY = "$YYYY-$MM-$DD" # ISO std date: like 1997-12-01 10.11 Keep simple header log Here is a simple strategy: Record all what comes in and record all what happened to that message. See how brief info is constantly recorded to *BIFF* folder. You can now check the *BIFF* log every day to see if the messages were sunk to right folders: Remember to add *BIFF* rule to every recipe, so that the sink message [sunk-somewhere] is recorded after incoming message headers. I use this one-liner log in my Emacs window which is updated by `live-mode' process all the time (See the Emacs tools section later). It gives a nice overview of email messages the I'm receiving: it's my biff(1) equivalent in Emacs. # this requires that HH and MM have been setup before, # see pm-jadate.rc NOW = "$HH:$MM" # the time only TODAY = "$YY-$MM-$DD $NOW" # ISO 8601: date and time $NULL = $SPOOL/junk.null.spool # /dev/null is dangerous BIFF = $PMSRC/pm-biff.log # or if you prefer a log per day (easy for cleanup): # BIFF = $PMSRC/pm-biff.log.$YYYY$MM$DD # .............................................. headers ... # DON'T USE THESE: they call shell # # FROM = `$FORMAIL -zxFrom:` # SUBJECT = `$FORMAIL -zxSubject:` :0 # Use procmail match feature * ^From:\/.* { FROM = "$MATCH" } :0 # Use procmail match feature * ^Subject:\/.* { SUBJECT = "$MATCH" } # ............................................. incoming ... # record log of incoming mail # or if you use a biff file per day, you could have: # echo "$NOW $FROM $SUBJ" >> $BIFF :0 hwic: | echo "$TODAY $FROM $SUBJ" >> $BIFF # ......................................... null recipe ... # spam-like addresses - let friends@planetall.com fall through :0 : * From:.*(remove|delete|free|friend@) * ? echo " [null-AddrReject]" >> $BIFF $NULL 10.12 Gzipping messages [Sean B. Straw ] On the recipe delivery line where you'd normally be tossing it into a folder do this instead: :0 c: |gzip -9fc >> $MAILDIR/mail.mbox.gz This will compress each message as it comes in (and since most are TEXT, it does a fine job - MIME, OTOH is one of the best ways to mailbomb someone since it doesn't compress well - but the indirect bombing via mailing lists doesn't do this), reducing the disk space required, usually dramatically. Done in conjunction with something like the following at the end of your .procmailrc, you could have a header file you could quickly rummage through looking for valid messages to add to a procmail recipe, then run: gzip -d -c mail.mbox.gz | formail -s procmail -m recipe.rc (note that if the recipe delivers into the mail.mbox.gz file on any condition, then you should look to MOVE the file before running this process, and use the moved version. In fact, this would be a good idea anyway, as newly delivered mail may appear in the end of the gzip file while you're doing this - and since your ultimate goal is to be able to eliminate junk, you'll want to know that after you've processed a gzipped mail file, you can delete it without accidentally whacking new mail). :0 * LASTFOLDER ?? ^^^^ { # Save the message in case we need to retrieve it. :0 c: |gzip -9fc >> $MAILDIR/mail.mbox.gz # copy headers for easy browsing - including being able to # identify lists you're being subscribed to. :0 h: header.log } 10.13 Emergency stop for your .procmailrc [jari] If I have a bad luck while I am testing a new recipe, it may run in a loop and and it may send me continuously email messages. I then have to quickly recall .procmailrc and start disabling my individual "control" recipe files. Yet I figure, in situations like this where every second is important, there must be a better way. [alan] This is quite easy already; put this at the top of your .procmailrc: # instead of leading dotfile, you may prefer # stopFile = $HOME/procmailrc.stop which shows up in default ls. # In the other hand you can do ls ~/.procmail* to see both... stopFile = $HOME/.procmailrc.stop :0 *$ $IS_EXIST $stopFile { EXITCODE = $EX_TEMPFAIL # Means: retry later; requeue HOST = "_stopped_by_external_request_" } Then, when testing your procmailrc and disaster happens, you can simply do following to disable your procmailrc filtering. % touch $HOME/.procmailrc.stop [richard] This is also a candidate recipe for including in an INCLUDERC. Combining the two ideas, we have a file procmailrc.stop which contains the recipe and is included near the top of .procmailrc, When you don't want it, mv it to procmailrc.go. Procmail complains about missing INCLUDERCs, but it does not complain about them if they exist and are empty. Another reason to not use dotted file names, but to use cp instead of mv. 11.0 Scoring 11.1 Using scores by an example First make all the needed matches and let the `SCORE' value to be set. Examine the score after the final value has been calculated. The condition lines say: o Start with some threshold: -250. o Read the subject into `MATCH' o Add 50 for each match of !. Notice the "^1": if it read "^0", only one 50 would be added for "!!!!", now that counts as 4 x 50 = 200. See procmailsc(1) for "^N" syntax. o Any dollar sign is likely spam. o find uninteresting subject words o And a negative count for replies. o Usually spam doesn't seem to have Re: in subject field. (but don't rely on this, spammers have started to use "re:") o letters such as !!! frequently found in the body are usually indication of spam. Add 100 for each match. # Idea by 26 Sep 97 Stephane Bortzmeyer :0 * -250 ^0 * ^Subject:\/.+$ * 50 ^1 MATCH ?? [!] * 50 ^1 MATCH ?? [$] * 100 ^1 MATCH ?? ()\<(free|sex|opportunity|money|great)\> * -250 ^0 ^Subject: *(Fwd|Fw|re): * B ?? 100 ^0 ()!!! { } # official procmail no-op SCORE = $= # Score has been calculated :0 fhw | $FORMAIL -i "X-Spam-Score: scored $SCORE" :0: # If score had positive value, sink message *$ $SCORE^0 junk.spam.mbox Given the following subject: "Great opportunity for free sex; no money required!!!!" procmail scores it this way: ! was found 4 times (200/weight 50), "free|sex..." regexp matched 4 times (400/weight 100). condition score Total sum so far ---- ---------------- procmail: Score: -250 -250 "" procmail: Score: 200 -50 "[!]" procmail: Score: 0 -50 "[$]" procmail: Score: 400 350 "^Subject:.*\" procmail: Score: 0 350 "^Subject: *(Fwd|Fw|re):" procmail: Score: 0 350 ! "" procmail: Assigning "SCORE=350" [david] Some notes on possible regexps and their differences: * 100^1 ^Subject:.*\<(free|sex|opportunity|money|great)\> That condition says to score 100 for every subject line that contains any of those five words ... not to score 100 for every one of those words in the subject, but 100 for every subject line that contains any of those words. So it will never score more than 100 unless there are multiple subject lines. You see, it offers five alternative regexps: ^Subject:.*\ ^Subject:.*\ ^Subject:.*\ ^Subject:.*\ ^Subject:.*\ Offhand, I think regexp below would score 400: 100 for "Subject.*free" and 100 for "sex" etc. Of course, the score might be higher if other lines in the header included the strings "sex", "opportunity", "money", or "great", but appearances of "free" outside the subject wouldn't be counted. * 100^1 ^Subject:.*\ [translates to] ^Subject:.*\ And this one would score 400 too. How? `MATCH' would contain whole subject and there would be non-overlapping matches to " great ", " opportunity ", and " free ". If we got rid of either or both of the word-border marks, it would score 500. Subject: Great opportunity for free sex; no money required!!!! * 100^1 MATCH ?? ()\<(free|sex|money|opportunity|great)\> 11.2 Brief Score tutorial #todo: test [elijah] If you're serious about using scores, please spend a minute reading this short example. VERBOSE = "yes" :0 * 1^1 foo * -2^2 bar { } a = $= :0 * 1^1 foo * -2^2 bar { :0 f | echo Whee: fun ; cat - } b = $= :0 * 1^1 foo * -2^2 bar { whee = "fun" } c = $= :0 h /dev/null Then if you would send a message From foo Fooof To: bar Subject foobar body-something-here The log file will tell you what happened. procmail: [20175] Fri Sep 26 10:25:23 1997 procmail: Score: 3 3 "foo" procmail: Score: -6 -3 "bar" procmail: Assigning "a=-3" procmail: Score: 3 3 "foo" procmail: Score: -6 -3 "bar" procmail: Assigning "b=0" procmail: Score: 3 3 "foo" procmail: Score: -6 -3 "bar" procmail: Assigning "c=-3" procmail: Assigning "LASTFOLDER=/dev/null" procmail: Opening "/dev/null" From foo Fooof Folder: /dev/null 46 11.3 Score's scope If you have a delivering recipe and the score is positive, the action lines are executed. If the score is less or equal to 0, then the `$=' information is lost, but also at the next recipe definition, even if the recipe is never executed. Study following example: :0 * 10^0 { dummy = "Score for condition xxxx was: $= $NL" :0 { dummy = "Next recipe, Score no longer available: $= $NL" } } # Wont' work. $= is getting set back to 0 outside of # the delivering recipe. dummy = "Score outside of all recipes: $= $NL" Here is interesting anomaly which [richard] discovered. It is presented here only as a curiosity. DO NOT USE IT IN YOUR RECIPES. (this not "clean programming", but a hack) [david] If you want to save the score for later use (even if it is zero or negative): :0 * 10^0 { } # procmail no-op SCORE = $= :0 A action_if_positive If other recipes that clobber the references for the `A' flag intervene, this will work: :0 * 10^0 { } # procmail no-op SCORE = $= ... more stuff ... :0 *$ $SCORE^0 action_if_positive 11.4 Counting length of a string Supposing `VAR' contains some text, we can count the characters by using dot to match every character and increasing score for every match. :0 * 1^1 VAR ?? . { } LENGTH = $= 11.5 Counting lines in a message (Adding Lines: header) [1995-10-03 PM-L Idea by David Karr ] [david] later corrected 1998-01-02: For one thing, the second condition always counts one too many (the final newline plus the closing putative newline create the extra match); second, after making that correction, an empty body would score zero and leave the variable undefined. :0 * 1^1 . * 1^1 ^.*$ * -1^0 { } lines = $= :0 fhw * ! ^Lines: | $FORMAIL -a "Lines: $lines" The reason we used it at all was that size conditions worked only on the entire text regardless of H or B or HB flags at the top of the recipe. Nowadays we can do this and get the accurate figure in one condition: # leave `B ??' out to measure the entire message :0 * 1^1 B ?? > 1 { } size = $= If you want to be silly about it (as some of us very often do), :0 * -1^1 B ?? > -1 { } size = $= gives the same result, and as long as the search area is non-empty, so do these, which are even sillier: :0 * 1^-1 B ?? < 1 { } size = $= :0 * -1^-1 B ?? < -1 { } size = $= [Karr] This recipe counts bytes in the message, you could use this Content-length replacement, prefer using the next recipe. The first score counts every character, and the second score sums up every line (that is: newlines are added). :0 HB # use B to measure body only * 1^1 . * 1^1 ^.*$ { textsize = $= :0 fhw * ! ^Content-length: | $FORMAIL -a "Content-length: $textsize" } 11.6 Determining if body is longer than header :0 * 1^1 B ?? > 1 * -1^1 H ?? > 1 { ..body was longer } 11.7 Matching last Received header [david] Here is way to use scores to hit the bottommost `Received' header. :0 * $ 1^1 ^Received:.*by$s+\/.* action 11.8 How to add Content-Length header We use procmail for local delivery, and would like to get it to generate the content-length header, if one doesn't exist. SUN-OS mailtool at least gets confused and merges messages together if there is no message body. [stephen] All you need to do is: a) Make sure that procmail is started without the -Y flag. b) Either, in your sendmail.cf, insert: H?l?Content-Length: 0000000000 Or (slightly less efficient), insert the following recipe in your /etc/procmailrc file and Procmail will take care of any necessary magic. :0 hfw * !^Content-Length: | /usr/bin/formail -a "Content-Length: 0000000000" 11.9 Testing message size or number of lines Size conditions ignore `H' and `B' on the flag line and always work on `HB' unless another search area is specified on the condition's own line. To test *only* the body, :0 # Note: this is in BYTES * $ B ?? < $NBR { ...whatever when fewer bytes } This syntax would obey a B flag on the flag line: :0 B # Note: this is in LINES * -1^1 . * -1^1 ^.*$ *$ $NBR^0 { ...whatever when fewer lines } 11.10 Counting commas with recursive includerc [jari] Foreword: David and Phil really are experts with procmail, and let this section serve as an example to "what on Earth is recursive procmailrc and how it is used?". I would not personally use recursive includerc, simply because I would not trade clarity: I find this easier to understand and maintain. `split' just explodes input according to comma and the `print' return how many elements were exploded to array `a'. The performance hit is not bigger than forked `procmail' binaries in recursive version. :0 * ^CC:\/.* { field = $MATCH saved = $SHELLMETAS SHELLMETAS commaCount = `echo $field | awk '{print split($0,a,",")}' ` SHELLMETAS = $saved } See the recursive RC implementation at [richard] Here is recipe that needs no recursion. MAX_RECIP is set to 9, but you may prefer some other value. This counts each comma. It allowed in addresses.Some folks sum Resent-xx *or* non-Resent-xx headers. I sum all. :0 * 1^1 ^(resent|apparently-)?(to|b?cc):\/.* * 1^1 MATCH ??, * $ -$MAX_RECIP^0 { :0 * $ $=^0 * $ $MAX_RECIP^0 { RESULT = "Count of commas is $=" } } 12.0 Formail usage 12.1 Fetching fields with formail -x If you're new to procmail your first though to read a header content from the message would might be call: SUBJECT = `$FORMAIL -xSubject:` That's not good. DON'T Do THAT. You just created expensive shell subprocess where procmail calls `formail' and feeds full message to it. We can do the same with minimum efforts: :0 * ^Subject:\/.* { SUBJECT = $MATCH } No shell subprocess called. This is 10x faster and consumes fewer resources, while it may need more typing. Use it and your your sysadm is happy with your well behaving procmail recipes that don't load the CPU unnecessarily. There are cases where you need to launch `formail', eg let's derive the address of the sender and store it to variable: FROM = `$FORMAIL -rtzxTo:` But you can still make this more efficient. Here is one example where you actually want to use "old" `=|' style variable assignment, make sure there are _no_ extra spaces: :0 hw FROM=|$FORMAIL -rtzxTo: That way only the _header_ gets fed into formail, whereas the previous backtick fed the _whole_ message. Also, you can then check the return code of formail with `a' or `A' recipe after this one. 12.2 Always use formail's -rt switch [faq] `-r' breaks RFC822, so always use `-rt' if you don't know what this means. Perhaps you should always use it anyway. [david] There is formail -r[t] rank bar graph in the source code of 3.11pre4. It might be easier to follow as a top-to-bottom listing (and again, Tom Zeltwanger appears to be using one of the older versions where From_ was mistakenly overpromoted). These are the rankings in version 3.11pre4: formail -r: formail -rt: Resent-Reply-To: Resent-Reply-To: Resent-Sender: Resent-From: Resent-From: Resent-Sender: Return-Receipt-To: Reply-To: Errors-To: From: Reply-To: Sender: Sender: Return-Receipt-To: From_ Errors-To: Return-Path: Return-Path: Path: From_ From: Path: [Stephane Bortzmeyer ] Always use `-rt' and never `-r'. Because such precedence (Sender over From) is an important violation of RFC 822. There is one canonical order, described in the RFC and nothing else should be used, like fuzzy ranking or, worse, reordering. This is a serious problem with formail. The proper order is: Reply-To, else From, else Sender, else And, how would you deal with resent mail?? Ie: Resent-Reply-To, Resent-From, and Resent-Sender? It treats `Resent-X' as X (" Whenever the string `Resent-' begins a field name, the field has the same semantics as a field whose name does not have the prefix. "). So you have to choose an order between them, the RFC does not specify it. [david] I think that the idea is that `-r' is intended to determine the origination address, not the place to reply; `-rt' is for determining the place to send replies. For addressing a response, yes, `-rt' will invert the header in a way more in line with the rules; for figuring out the origination point, formail -r -zxTo: might be better than formail -rt -zxTo: And here's an additional problem: `formail' `-rD' always uses the `-r' precedences; you can't make it use the `-rt' precedences and the `-D' cache checking function at the same time. 4.4.4. AUTOMATIC USE OF FROM / SENDER / REPLY-TO (RFC 822 excerpt) For systems which automatically generate address lists for replies to messages, the following recommendations are made: o The `Sender' field mailbox should be sent notices of any problems in transport or delivery of the original messages. If there is no `Sender' field, then the `From' field mailbox should be used. o The `Sender' field mailbox should NEVER be used automatically, in a recipient's reply message. o If the `Reply-To' field exists, then the reply should go to the addresses indicated in that field and not to the address(es) indicated in the `From' field. o If there is a "From" field, but no `Reply-To' field, the reply should be sent to the address(es) indicated in the `From' field. Sometimes, a recipient may actually wish to communicate with the person that initiated the message transfer. In such cases, it is reasonable to use the `Sender' address. This recommendation is intended only for automated use of originator-fields and is not intended to suggest that replies may not also be sent to other recipients of messages. It is up to the respective mail-handling programs to decide what additional facilities will be provided. 12.3 Using -rt and rewriting the From address Sendmail adds the `From' header which points to your account. But in some cases you may wish to rewrite the `From'. o You respond to spammer and you want to hide in some extents your address. ( The headers will still be there, but at least hitting `r' in most MUA's pick up the `From' ) o You want to rewrite `From' to show your virtual address me@forever-lasting-address.com instead. o You are in some other account currently, but you want to send message to some Net service (eg. Mailing list) that expects to see the same address you first time used in subscription. You could also use `Reply-To' to signify where you want further responses to go, but that doesn't hide your true `From' address. And there are still MUAs that don't obey `Reply-to'. Whatever reason you have to rewrite From header, here is the command. :0 fhw | $FORMAIL -rt -I "From: me@forever-lasting-address.com" 12.4 Formail -rt and Resent-From header Here is something that made me scratch my head a lot. Let's examine scenario first which explains how the email travels. account --> virtual-address --> Local-address In this chain I was sending message from my University account to my official work address, the *virtual-address* delivers the mail to right local domain. There is only one problem with this picture. When I generated response from *Local-address* with `formail' `-rt', the generated address pointed back to *virtual-address, which pointed back to *Local-address* of course. A loopback was ready, I never got route travelling to original address *account* What was happening here was that the mailserver that handled the virtual-address, didn't *forward* the message, but instead *resent* the message. In this process a set of new headers were generated: Resent-From: X-From-Line: Received: from Resent-Message-Id: <199710151903.WAA28670@virtual-address> Resent-Date: Resent-To: Received: ... Message-Id: <199710151904.WAA05050@account-domain> From: And now when the formail -rt command was used, it picked up the `Resent-From' added destination where the message should be returned. Surprising, but according to procmail, 100% correct. `Resent-From' has higher priority than `From'. The Resent-* headers are considered *informative*, and should never be used when automatically generating a response. The problem here is the middleman, it should not _resend_ a message, but rather _forward_ it. So I put this into my .procmail to handle the broken middleman in our site. # Remove that misleading Resent-From if it was added by our # "middleman" :0 fhw * Resent-From: | $FORMAIL -IResent-From: [edward] adds to this that: As you know, `formail' `-rt' is for composing a response to the address from which an e-mail was sent. Let's say you are on vacation and have set up a procmail recipe to autorespond to all e-mail you receive. Furthermore, let's say Joe sends me an e-mail and I re-send it to you. If you wanted to respond to the sender of the e-mail that you received, would you e-mail me or Joe? You better e-mail me because I was the one who sent it to you. Joe may not even know you. Imagine if you did send your response to Joe. It would probably cause him considerable confusion as to why you are sending him e-mail informing him that you are vacation. formail `-rt' uses a heuristic algorithm to determine who it should respond to, based on the presence of various headers and their contents. If you look at the formail.c source code, you'll see a graphical representation of this algorithm. It will also explain difference between the results of `-r' and `-rt'. `Resent-Reply-To' has the highest relative importance/reliability of all header fields. Next is Resent-From and Resent-Sender, followed by Reply-To, From, Sender, et al. 12.5 Quoting the message Use formail -rtk 12.6 Without quoting the message Use formail -rkb or formail -rkt -p '' or formail -rkt -b 12.7 How to include headers and body to the reply message [david] ...It does require that the entire head fit into sed's hold space, but it almost always will; exceptions are cases where the sender messed around and added a bunch of uninformative (and usually self-congratulatory) additional headers or when the message got caught in a loop for a while but finally escaped before being bounced for too many hops. :0 fhw r | sed -e H -e '$ G' :0 fhw | $FORMAIL -rt; ... now generate reply ... 12.8 Adding text to the beginning of message We don't actually filter anything here. It's just a trick to reprint headers and add some text after them: text appears at the beginning of body. :0 fhw | cat - ; echo "This text comes after the headers." 12.9 Adding text to the end of message :0 fb | cat -; echo "added text after body" 12.10 Adding text before quoted message If you are generating an auto-reply message where you want to place the notification to the beginning of body followed by the quoted original message, here is recipe for it. Substitute *condition* to trigger the reply condition. :0 * condition { :0 fhb | $FORMAIL -rtk -p '>' \ -I "From: me@here.com" \ -I "$MY_XLOOP" :0 fhw | cat -; echo "added message at the start of body" } 12.10 How to truncate headers (save filing space) [Idea by Rodger Anderson ] As a last recipe, if you're tight of space, you could remove extraneous headers. But make sure you want to that, because headers may contain useful information about URLs and other things like mail server addresses. Some people keep signature information in separate X-header (say: `X-My-Info') instead of at bottom of message so that it won't bother people and disturb reply quoting. # Strip header to bare minimum # If this is MIME multipart, then skip recipe :0 fhw * ! multipart | $FORMAIL -k \ -X Date: \ -X Subject: \ -X Message-Id: \ -X From \ -X To: \ -X Cc: \ -X Reply-To: \ -X Mime-Version: \ -X Content-type: :0 : mail.default.mbox [david] comments the final recipe o You should keep the `Reply-To' header if there is one. If the sender wanted replies directed to a different address than that in the `From' header, you are losing that information and, when you respond, writing to the wrong place. o You ought to keep `To' and `Cc' so that you can tell when you read your mail who else was sent it. If your mail user agent has a groupreply or replyall function, keeping `To' and `Cc' will allow that feature to continue working. This way you are cheating yourself out of it. o '-X From' is enough to keep both the `From_' line and the `From' header. You don't need to specify -X From: again after it. (To keep `From_' without `From:' you need to say -X "From " or something similar, with a quoted space.) o All mail is going to have a line (usually two) beginning 'From'. Another slightly different approach is to kill the headers that take the most of the space. If you're not interested in tracking down the original sender of possible UBE message, then you can remove the `Received' headers. You may want to fill out the condition line to simplify only your work or campus messages, and let other messages retain their full headers. :0 fhw * possible-condition-to-handle-only-certain-messages | $FORMAIL -I Received: 12.11 Adding extra headers from file [stephen] Notice that the obvious solution won't do here: :0 fhw * condition | $FORMAIL -rt | cat - $HOME/newHeaders The problem here is that there will be a newline in the middle, which causes the header to be shortened (procmail determines the new header/body boundary after having processed each filter). Use the following instead. :0 fhw * condition | $FORMAIL -rt -X "" ; cat $HOME/pm-newHeaders.txt ; echo [david] If $HOME/newHeaders ends in a blank line, you don't need the "; echo". Under some circumstances procmail puts back the blank separating line if it gets lost, but I'm not sure exactly what those are, and you have a SHELLMETAS character in there already (the first semicolon), so a shell is forked anyway. But this is my favourite way (it assumes that formail -r will never generate a continuation line for From:); if you use it, make sure that the newHeaders file does NOT contain a trailing blank line: :0 fhw * whatever | $FORMAIL -rtn :0 A fhw | sed "/^From:/r $HOME/newHeaders" 12.12 Splitting digest [Idea by David Hunt] One interesting idea to handle digests automatically as single messages if that we call procmail recursively. First Call formail to split the mail when headerfields are contained in the body, calling procmail again as the output-program of formail. insertion of X-Loop makes it possible to reuse .procmailrc for the separate messages. # If it looks like more than one mail, send to formail for # splitting, then send back to procmail for sorting again. :0 B * ^From [-_+.@a-z0-9]+ (Sun|Mon|Tue|Wed|Thu|Fri|Sat) * ^From: * ^TO *$ ! H ?? ^$MY_XLOOP | $FORMAIL -A "$MY_XLOOP" -m4s procmail 12.13 Mailbox: Splitting to individual files [david] To split some old email archives into individual files while stripping unimportant header fields, use following. The keys are to use procmail's `-p' option, to strong-quote `$FILENO' in the setting of `DEFAULT', and to use /dev/null or a known empty file as the rcfile. % setenv FILENO 0000 % formail -kXDate: -XFrom: -XTo: -XSubject: -XIn-Reply-To: \ -XX-Mailer +1ds \ procmail -p DEFAULT=`pwd`/'$FILENO.txt' \ /dev/null < inputfile 12.14 Mailbox: Extracting all From addresses from mailbox The -ns causes formail to split the mailbox and feed each mail separately to next process. % cat mailbox | formail -ns formail -xFrom: | sort -u 12.15 Mailbox: Applying procmail recipe on whole mailbox % cat mailbox | formail -ns procmail pm-experiments.rc 12.16 Mailbox: run series of commands for each mail (split mailbox) ...Maybe the heat has melted my brain, but I can't seem to get formail to perform a series of commands on each mail that it has split from a folder. Here's an example of a simple debugging attempt: I've tried parentheses, putting the commands into a shell function, and other flailings too numerous to remember, all to naught. % formail -s addr=`formail -XFrom: | formail -r | formail -zx To`;\ echo "$addr" >>output It appears that formail doesn't use the shell when executing the command specified when splitting. No SHELLMETAS here. Given that, the secret is to fire up the shell explicitly yourself to do the piping: % formail -s sh -c 'formail -XFrom: | formail -rzxTo:' >> output Note that you only need two formails in the pipe, not three, as the -r flag works correctly when combined with other flags. ...To me, a large mailbox would consists of about 10,000 messages per month (that's about what I get). That would mean that my mailbox would contain 60,000 messages in 6 months. I sure as heck wouldn't want to skim through it all or even try to load it up in an MUA. [1998-08-27 Bennett Todd ] I also deal with monster volumes of email. I've switched over entirely to Maildir in all my email handling; the only place I still see mboxes is in the save folders of my netnews reading (using slrn) and whenever I want to process them I either convert them into Maildir (e.g. for archival) or simply split them into multiple messages. Splitting into multiple messages turns out to be preposterously easy; using GNU csplit: [richard] The csplit invocation shown here will catch occurences of ^From embedded in the message body if your MUA hasn't escaped them with a >. Some MUAs use content-length headers and don't escape ^From. Procmail supports this. Be cautious if you choose to use this simple split. csplit -n4 - '/^From /' '{*}' That will create an empty xx0000 which I delete, and leave the messages in files named xx0001, xx0002, etc. If you have more than 9999 messages in a folder then go -n6, or -n9, or whatever. Once they're split it's really easy to use shell tools to bundle messages into batches, file them into categories, etc. If you are archiving all email traffic forever (which I do) then another dandy tool to add to the mix is glimpse http://glimpse.cs.arizona.edu/ it takes a while to build the index, but that's a fine job to run out of cron at night. Once the index is built it's a pleasingly quick way to root through big archives of messages. 12.17 Option -D and cache [Bob Weissman ] and [stephen] These files are self-limiting. The number after the `-D' is the size in bytes above which the older entries will be removed. E.g., my .procmailrc has :0 Wh: .msgid.cache$LOCKEXT |$FORMAIL -Y -D 12288 .msgid.cache And the file never exceeds 12288 bytes by very much. Though formail indeed exceeds this size by as much as the length of one `message-ID', the file size should never grow significantly beyond that, even if used indefinitely. The file is in binary format, each entry terminated by single null byte, and an occasional (significant placeholder) double null [philip] The format of the cache is initially as follows: entry\0entry\0entry\0\0 When the file size grows to equal-to or greater-than the size specified on the command line, formail starts over at the beginning, using a double-null to mark where it stopped. However, entries after the double-null, except for the partially overwritten one, are still valid and checked, so that the file is then in the format: entry\0entry\0entry\0\0partial-entry\0entry\0entry\0\0 New entries will be written after the first double-null, so that it implements a circular cache. Check out lines 319-322 of formail.c 12.18 Option -D and message-id in the body Some of my messages contain the original Message-ID in the body of the letter and not the Header. Is there an option for Formail to over come this problem? [david] This is strictly untested; I don't know where in the body the Message-ID's appear, but if they're at the top of the body, this might help: :0 hW # Message-Id: in the head, *$ ^Message-Id:.*$NSPC | $FORMAIL -D $cache_size $cache_name :0 E BbW # If not but there's one the body, try body. *$ ^Message-Id:.*$NSPC | $FORMAIL -D $cache_size $cache_name You might want to copy a `Message-Id' from the body to the head in any case (if there's none already in the head) just to have it in the right place, so we could do that first and then `formail' `-D' will work normally. This form will run formail twice if the `Message-Id' header is in the body instead of the head, but it will look for `Message-Id' on *any* line of the body, not just at the top: :0 fhw *$ ! H ?? ^Message-Id:.*$NSPC *$ B ?? ^\/Message-Id:.*$NSPC | $FORMAIL -A "$MATCH" :0 hW | $FORMAIL -D $cache_size $cache_name 12.19 Reducing formail calls (conditionally adding fields) #todo: url Suppose you want add fields to the message when some condition is met: :0 # compose initial reply | $FORMAIL -rt :0 * condition1 | $FORMAIL -A "X-Header1: value1" :0 * condition2 | $FORMAIL -A "X-Header2: value2" Hm, we have three processes called here, can we minimize the calls? Yes, this is idea from [philip] and [david]. Notice that there is only ONE process needed. :0 * condition1 { hdr1 = "-AX-Header1:value" } :0 * condition2 { hdr2 = "-AX-Header2: value" } :0 fhw | $FORMAIL -rt ${hdr1+"$hdr1"} ${hdr2+"$hdr2"} And if you want to stack all headers to only one variable, it is a bit of extra work. Below we use short variable names only because of the line space: the calls fit on one line. o field = all (f)ields stacked to one string. o nl = continuation newline terminator of previous field The recipe says: if *field* has previous value, set `nl' to newline separator, later concat previous contents of *field* with possible newline and new header field. field # kill variable :0 { nl nl = ${field+"$NL"} field = "$field${nl}X-Header1: value" } :0 { nl nl = ${field+"$NL"} field = "$field${nl}X-Header2: value" } :0 fhw # If we have something in *field* * ! field ?? ^^^^ | $FORMAIL ${field+-A"$f"} The above recipe was the most general one, each recipe determined by itself if the *f* existed previously or not. But if you know that *f* is already set, you can write simpler recipe: :0 # We know f has value before our module { field = "$field${NL}X-Header1: value" } 12.20 Formail -A -a options You can't use option -A with -a or -I if the header name is the same. Like below where you try to keep only the last definition of X-1, but the first -A isn't seen when -a is applied. formail -A "X-1: 1" -a "X-1: 2" --> X-1: 1 X-1: 2 Whereas; separate pipes give you the desired results. formail -A "X-1: 1" | formail -a "X-1: 2" --> X-1: 1 formail -A "X-1: 1" | formail -I "X-1: 2" --> X-1: 2 12.21 Formail -e -s options [david] I had a file of alternating `From' and `Date' lines and wanted to convert it into an mbox. formail -dem2 -s < input > mailbox should have done it, right? Nope; `formail' `-s' took it all as one message, even with -m1. When I edited in blank lines, the command worked. My first reaction was that the -e option wasn't working as advertised and that the blank lines were necessary after all. Then I realized the real problem: there was no interruption in the succession of valid header lines in the input for anything that could look like a body. I could have put something other than blank lines between each pair of headerfields and then -e would have done its job, but as long as every additional line looked like a valid RFC822 headerfield, even if its name was the same as one that had appeared earlier, `formail' `-s' assumed that it was still the same message's head. 13.0 Saving mailing list messages 13.1 Using subroutine pm-jalist.rc to detect mailing lists Because I didn't have sendmail plus addressing capabilities (explained in next section) I wrote module *pm-jalist.rc*. It is included in the pm-code.zip The subroutine tries to detect and derive the mailing list name directly from the message. Many Mailing daemons: ezlm, smarlist, listserv, majordomo use standardized headers from where the list name can be picked. After this subroutine has been applied to message, the variable `LIST' contains the mailing list name. You no longer have to manually insert separate recipes for each new mailing list you subscribe to, because this subroutine adaptively finds new new mailing lists. Once the mailing list name has been grabbed, you can easily "map" or convert the name to any suitable folder name before saving it: LIST LIST name Description of mailing list (as grabbed) you want -------------------------------------------------------------- jde java.jde Java Development Env java java.prog Java programming FLAMENCO flamenco Flamenco music tango-l tango Argentine Tango dancing tm-en-help tm-en Emacs TM mime package mailing list w3-beta w3 Emacs WWW mailing list You set then conver grabbed `LIST' to new folder name with conversion table: JA_LIST_CONVERSION = "\ jde java.jde,\ java java.prog,\ FLAMENCO flamenco,\ " And to detect all mailing lists, you only need one recipe, like below: INCLUDERC = $PMSRC/pm-jalist.rc :0 : # if list name was grabbed * ! LIST ?? ^^^^ $LIST_SPOOL_DIR/list.$LIST 13.2 Using plus addressing foo+bar@address.com If you have a recent enough (8.8.8+) `sendmail', please ask your sysadm to activate the plus addressing. Procmail gets `bar' in `$1' automatically. http://www.faqs.org/faqs/mail/addressing/ [Bennett Todd ] The PLUS feature has also been Implemented in *qmail* and *Postfix* (nee VMailer). By default qmail uses "-" rather than "+", but it can be configured to use different rules; Postfix doesn't come with either enabled, but its example main.cf has a commented-out line to enable "+"-based support. [Roy S. Rapoport ] Plus addressing is implemented using sendmail (well, I'm sure the other MTAs can also do it, but my experience is with sendmail). The last few releases of sendmail (8.8.6, 8.8.7, 8.8.8) all seem to automatically default to allowing it. Basically, for any address of the form `foo+baz', sendmail ignores the `+baz' part and just delivers it to foo. If you want the easiest method to handle mailing list mails, then subscribe to list by using dedicated plus address: login+list.procmail@example.com login+list.debian@example.com login+list.linux@example.com When you receive message from any of these mailing lists to your `login' account, the `list.procmail' is already in variable `$1' and the recipe to sink all mailing lists to their individual folders is very simple: # Note: The $1 contains value only _IF_ procmail # is invoked with option -m or -a (with an argument). # Be sure procmail is invoked with that oprion either as from # LDA or ~/.forward. # # $1 is pseudo variable and it can't be used in condition line, # so we copy the value to ARG. ARG = $1 :0 : * ARG ?? list $ARG [david] Here is what I have configured to sendmail.cf to support plus addressing: Mprocmail, P=/usr/bin/procmail, F=DFMmShu, \ S=11/31, R=21/31, \ T=DNS/RFC822/X-Unix, \ A=procmail -m $h $f $u Well, this is definition of the procmail mailer, not the local mailer. Furthermore, there's more to plus-addressing support than the definition of the local mailer. Ruleset 0 or 5 needs to be set up to move everything after the + into the 'host' variable ($h). Unless you have a strong understanding of sendmail rulesets and rewriting rules, you should not attempt to add plus-addressing to your sendmail.cf, but instead just install the latest version of sendmail and use the m4 sendmail.cf generation tools with a .mc file that contains: FEATURE(local_procmail, `/usr/local/bin/procmail') plus whatever else your site requires. ...Ok, I corrected it. Well, here's what that looks like. I did look into the part about Ruleset 5 while trying it on originally. But all I could do was make sure that the plus-addressing section was there. Mlocal, P=/usr/bin/procmail, \ F=lsDFMAw5:/|@qSPfhn9, S=10/30, R/40, T=DNS/RFC822/X-Unix, A=procmail -Y -a $h -d $u Mprog, P=/bin/sh, F=lsDFMoqeu9, S=10/30, R/40, D=$z:/, T=X-Unix, A=sh -c $u 13.3 Using RFC comment trick for additional information Recall from [rfc1036] that the preferred Usenet email address formats are following From: login@example.com From: login@example.com (First Surname) From: First Surname I invented this idea after reading Eli's excellent faq about email addressing. Please read it (especially section 19.) before you continue in order to understand what I'm going to present. I have an account which does not support plus addressing and I was kinda jealous to everyone that could use this neat sendmail addressing scheme. The plus addressing helps so much better to deal with mailing list messages. But as it turns out, we can simulate in some extent plus addressing with pure RFC compliant address. We exploit RFC comment syntax, where comment is any text inside parentheses. According to Eli's paper, comments should be preserved during transit. They may not appear in the exact place where originally put, but that shouldn't be a problem. So, we send out message with following `From' or `Reply-To' line: first.surname@domain (First Surname+list.procmail) Now, when someone replies to you, the MUA usually copies that address as is and you can read in the receiving end the PLUS information and drop the mail to appropriate folder: `mail.procmail'. [About subscribing to mailing lists with RFC comment-plus address] It's very unfortunate that when you subscribe to lists, the comment is not preserved when you're added to the list database. Only the address part is preserved. I even put the comment inside angles to fool program to pick up everything between angles. But I had no luck. They have too good RFC parsers, which throw away and clean comments like this. Eg. procmail based mailing lists, the famous `Smartlist', use `formail' to derive the return address and `formail' does not preserve comments. The above gets truncated to first.surname@example.com Also many mailing lists send out messages as `Bcc', so your address is not even available in headers anywhere, neither is this nice RFC comment. Ah well, but this RFC comment trick works very well in private communication, virtually all MUAs copy whole contents of a `From' or `Reply-To' header to `To' header, preserving comments and you get the benefit of plus addressing. Here is procmail code to demonstrate reading the PLUS information from RFC comment-plus field: RC_EMAIL = $PMSRC/pm-jaaddr.rc # Address explode module :0 *$ To:\/.* { INPUT = $MATCH INCLUDERC = $RC_EMAIL # Explore grabbed To address # If COMMENT_PLUS was defined, module found "+" # address which contained, say, "mail.procmail". # Save it to folder. :0 : * $COMMENT_PLUS ?? [a-z] $COMMENT_PLUS } Pretty simple. And you can put anything inside RFC comment and do whatever you want with these plus addresses. _NOTE_: there are no guarantees that the RFC comment is preserved everytime. Well, the standard RFC822 says is must be passed untouched, but I'd say it is 90% of the cases where mail is delivered from one server to another, it is kept. Example: if you discuss in usenet groups, you could use address first.surname@example.com (First Surname+usenet.default) first.surname@example.com (First Surname+usenet.games) first.surname@example.com (First Surname+usenet.emacs) first.surname@example.com (First Surname+usenet.linux) 13.4 Simple mailing list handling [Peter S Galbraith ] I have used this in the past (by simply looking at the spool file and seeing the `From_' line of the message): :0 : * ^From debian list.debian.mbox :0 : * ^From procmail list.procmail.mbox Now, I collect specific high-volume mailing lists (like Debian) into their own spool files like above, and let other recipes catch all other mailing lists (like procmail and fvwm) into a single spool file with later rules: :0 : # Majordomo lists * ^Sender: owner-\/[-a-zA-Z0-9_.]* list.$MATCH.mbox :0 : * ^X-Mailing-List: <\/[-a-zA-Z0-9_.]* # SmartList lists list.$MATCH.mbox So Debian mailing list mail goes to Debian, procmail and fvwm mail go to maillists and mail addressed to me yet CC'ed to a list go to my main spool file. 13.5 Archiving according to TO Traditional way to detect and save mailing list messages is: :0 : * ^TO()procmail list.procmail [and so on...] The following code will save the message to folders list.foo, list.bar, list.procmail when the name is in the TO address. # generalised version # By dattier@wwa.com (David W. Tamkin) # cases desired for foldernames LISTS = "(foo|bar|procmail)" :0: * $ ^TO_()\/$LISTS * $ LISTS ?? ()\/$\MATCH list.$MATCH 13.6 Using Return-Path to detect mailing lists [philip] For most mailing lists, a more accurate way to determine whether it came from the list is to examine the Return-Path:, From_ or Resent-From: header. This catches messages from the list, regardless of whether they were To: the list, Cc: the list, or even Bcc: the list, something which doesn't show in the message at all. For instance, I refile message from the procmail mailing list using the following recipe: :0 * ^Return-Path: + is not a bad idea, though because it's not a zero-width assertion but rather an actual character class, you have to strip it from the match LISTS = "(foo-list|bar-list)" # 1) to get the match # 2) rematch sans the trailing \> # 3) Note: preserves capitalisation of the string :0 * $ ^TO_()\/$LISTS\> * $ MATCH ?? \/$LISTS * $ LISTS ?? ()\/$\MATCH { M = $MATCH } [Era] gives this sample example to describe what happens above: VAR = "MOO" what = "(moo|bar|baz)" :0 # Search what from VAR * $ VAR ?? ()\/$what { # Now; what is was that really matched, there were several # choices: moo,bar,bar # Beware: $MATCH must not contain regexp characters :0 * $ what ?? ()\/$MATCH { } # no-op # Fine, New MATCH contains moo } 14.0 Procmail, MIME and HTML 14.1 Mime Bibliography "List of annoying things that various MIME implementations do." ...The result is a sort of style guide for implementors of things that generate MIME. Feel free to send comments or contributions. http://www.cs.utk.edu/~moore/mime-style.html 14.2 Mime notes [1998-07-28 PM-L Brett Glass ] MIME filename buffer overflow bug described at http://www.sjmercury.com/business/microsoft/docs/security0728.htm This bug is particularly insidious because it can be exploited via by spamming software and could impact millions of users in a very short time. Use procmail to plug the hole at the mail server, by truncating the excessively long file names in the MIME headers: eliminate the extra-long filenames, truncating them back to (say) 64 characters max? All that's required is to recognize header below and make sure that is chopped to a reasonable size. Content-Disposition: attachment; filename="" [era] I believe that the problem isn't really that the filename is over the allowed length for some platform (Macintoshes allow something like 27 characters if memory serves) but a bug in how some particular email clients allocate memory for the file name string (but I am really only speculating here). ...So far Eudora, Netscape Mail, Outlook Express, and mutt (Unix) have all been found to have buffer overflow problems. (mutt-0.93.2i and up are fixed. A patch for 0.93.1 is available.) 14.3 Software to deal with mime or html See also nearest Perl CPAN module, http://www.perl.org, site and CPAN/modules/by-module/MIME/ There's also Unix program `munpack' to explode a MIME message to separate files. Use ftpsearch to find it. [MIME aware mail agents in Unix] See `mutt' that could handle HTML mail. (Pointer to Mutt mentioned below) All Emacs Mail agents can handle MIME if you install some of the mime handling packages: TM, SEMI, rmime.el. See http://www.bmrc.berkeley.edu/~trey/emacs/mime.html 14.4 Mime content type application/ms-tnef ...A member of one of my mailing lists appears to be using Microsoft Mail. His messages to the list are usually accompanied my an encoded attachment like this one: "c:\eudora\users\steven@idma.com\attach\WINMAIL11.DAT" The message headers include the following clause: Content-Type: multipart/mixed; boundary="openmail-part-058c9f3d-00000001" This is driving people crazy. What is causing this and is there any way to make it stop? Most likely the sender is using Exchange (or Windows Messaging or Outlook97) and sent the messages in Rich Text Format. It puts the RTF message in an attachment called WINMAIL.DAT (application/ms-tnef). But this attachment is useless unless the recipient is also using Exchange. The sender can turn off the RTF option for messages to you. For more information, see: XCLN: Sending Messages In Rich-Text Format http://support.microsoft.com/support/kb/articles/q136/2/04.asp 14.5 Trapping html mime messages [era] Here's a simple filter to throw out unwanted html that is sent by using mime. [jari] This recipe detects if the message is classified as mime *text/html* and junks it to separate folder. It does not change the message content. If you want to actually remove html or other attachments from the message, see `pm-jamime-kill.rc' in the module list. :0: *$ ^Content-Type:$s*multipart/(mixed|alternative);\ $SPCNL*boundary="?\/[^;"]+ * $ B ?? ^--$\MATCH\$([-a-z]+:.*)*Content-type:$s*text/html junk.html.mbox Some more examples can be found from section: 'Explaning ^^ and ^' 14.6 Complaining about html messages [Marek Jedlinski ]. This how I respond to html messages. In my `noHTML.txt' I politely explain why I don't appreciate receiving HTML email, and ask to resend the message as plaintext. What happens in the majority of cases is that the sender resends the same message again ("oh, it bounced, let's try again") and I assume they don't actually read my explanation since they just happily resend the HTML cr*p. It bounces again at which point they give up... Tough luck, I say ;) BTW, the above recipe is placed *after* mailing list mail gets sorted. When someone sends HTML mail to a mailing list I read, I just flame them in person TXT_NO_HTML = $HOME/noHTML.txt :0 BH * ! ^FROM_DAEMON *$ ! ^$XLOOP * ^Content.Type.+multipart.alternative * ^Content.Type.+text.html { LOG = "$NL --TRASH: multi-part HTML $NL" :0 | ($FORMAIL \ -rtk \ -A "X-Mailer: Procmail Autoreply" \ -A "$XLOOP" ; \ cat $TXT_NO_HTML \ ) | $SENDMAIL } 14.7 Converting HTML body to plain text _Note:_ Older lynx has security holes: http://ciac.llnl.gov/ciac/bulletins/h-82.shtml http://lynx.browser.org/ The most popular solution to convert html body into plain text is to use `lynx'. Another more straightforward method is to use a perl one liner: it's quicker, easier to use with procmail but it doesn't pretend to know about HTML DTD. The recipe below should be taken with grains of salt: seeing HTML tag is no guarantee that the body "only" has html. A cautious recipe writer also watches for MIME multipart messages. (See `pm-jamime.rc' to draw some mime characteristics from message) This recipe has been written so that you can add more alternative html conversion scripts. You may even want to select the appropriate conversion for a message: eg. perl for unimportant ones. _Note_: This is oversimplified method of checking if body contains html. It would be probably a good idea to check mime headers which indicate html encoding here as well. :0 B * () * () { conversion = "lynx" # or select this conditionally :0 * conversion ?? lynx { # In new lynx version you can read from stdin. If # /dev/stdin doesn't exits try /dev/fd/0 # # lynx -dump -force_html -nolist -restrictions=all \ # /dev/stdin # # Without a global lock on this, you have a chance # that two procmail instances will try to write to # msg.dump file = "$HOME/tmp/msg.dump" LOCKFILE = $file$LOCKEXT :0 fbw | cat > $file && lynx -dump $file LOCKFILE } :0 E fbw | perl -0777 -pe 's/<[^>]*>//g' } 14.8 Getting rid of unwanted mime attachments (html, vcard) Microsoft and Netscape MUAs are conquering the PC world and it's likely that you will receive messages from people that use this software. The unfortunate thing is that you receive the message in mime format: HEADERS --mime-boundary plain text --mime-boundary Some idiotic html (or other type) copy of the text --mime-boundary When you would like to see a traditional message in the format: HEADERS plain text Good news. There's a procmail module that addresses this problem. The module can kill any mime attachment and the predefined sets include typical cases: o Microsoft Explorer has a bad habit of including 7k application/ms-tnef attachment to the end of message. o Lotus Notes sends similar extra attachment. o Microsoft Express sends a copy of message in html format in the attachment. o Netscape's Mozilla sends a copy of message in html. See example. It Also sends annoying `vcards'. The module is called `pm-jamime-kill.rc' and included in Jari's `pm-code.zip'. (Note: #REF #procmail_module_list ;Procmail module list;) 14.9 Sending contents of a html page in plain text to someone [timothy] Send an email with the subject: "GetPage: some.url.here/". And it comes back. Kurt Thams also pointed out that lynx allows file:// protocol and since procmail is running as you, this would be a security risk. GetFile: ~user/.login We make the script safe here by forcing "http://$MATCH" and not simply using "$MATCH" :0 *$ ^Subject:$s+GetPage:()\/.* *$ ! ^$MY_XLOOP | ($FORMAIL \ -rt \ -I "Precedence: junk" \ -I "Subject: Requested page: $MATCH" \ -I "$MY_XLOOP" ; \ lynx -dump "http://$MATCH" \ )| $SENDMAIL [era] If all you need is to create a suitable MIME package, there are various MIME command-line utilities such as metasend (which is for interactive use, and so doesn't work very well with Procmail) and mpack you can try. If your needs are simple, you could even read up a bit on the MIME spec and generate the necessary headers and separators yourself (echo Content-Type: multipart/mixed etc etc etc). Conversely, if your needs are complex, get the Perl MIME package from CPAN and cook up your own tool. The MIME FAQ (especially part 6) is a good place to look for info. http://www.faqs.org/faqs/by-newsgroup/comp/comp.mail.mime.html [jari] See procmail module list at the beginning of this document for procmail based MIME file servers. (Note: #REF #procmail_module_list ;Procmail module list;) 15.0 Simple recipe examples 15.1 Saving: MH folders -- numbered messages Hm. This is explained in the procmail man pages, but not very well. There are just one or two occasions where the man page tells how to create individual files instead of catenating messages to a folder. Notice the `/.' at the end of folder name :0 * condition dir-folder/. [manual] When delivering to directories (or to MH folders) you don't need to use lockfiles to prevent several concurrently run- ning procmail programs from messing up. On a save to a directory, how does procmail determine what to put after $MSGPREFIX to complete the name of the file? [philip] It's the inode number of the file encoded in base-64 with the set of characters A-Za-z0-9-_, in reverse order. So, for example, the inode numbered 59699 would be encoded as follows: 59699 = 51 + 64 * ( 36 + 64 * 14 ) A=0, B=1, ..., N=13, O=14, ..., a=26, ..., k=36, ..., z=51, 0=52, ... --> zkO 15.2 Saving: to monthly folders # Use any date method mentioned previously to define variables # YYYY YY MM DD. Archive digests monthly :0 c: * ^From:.*\/mailing-list-digest@some.net { # Get the "mailing-list-digest" string, do not use following # # MBOX = `echo $MATCH | sed -e 's/@.*//' ` # # Because we really don't need those extra shell processes. # Procmail can derive the word 10x more efficiently :0 * MATCH ?? ()\/[^@]+ { MBOX = $MATCH } :0 : $YYYY-$MM-$MBOX } 15.3 Modifying: Filtering basics Pay attention to the `cat' command position in each recipe. :0 fbw | echo "This is a line of text _before_ the body"; \ cat - :0 fbw | cat - ; \ echo "This is a line of text _after_ the body" :0 fbw # prepend text before the body | cat msg.txt - :0 fbw # append text at the end of body | cat - msg.txt :0 fbwi # replace the body with text from file | cat msg.txt 15.4 Modifying: Squeezing empty lines around message body [david] Anything that replaces the body is going to require an outside process, even if it's only /bin/echo. In order to trim empty lines from the beginning of message and from the end of message, you can do this, if the entire body fits into `LINEBUF' :0 B fbw * ^^$*\/.(.|$)*.$ | echo "$MATCH" # trailing extra newline intended If your version of cat is BSD-ish, # SysV's cat has a different meaning for -s and cannot do this :0 B fbw * $$$ | cat -s otherwise, it can be done with a very simple sed filter: :0 B fbw * ^^($)|$$$ | sed /./,/^$/!d Note that cat -s has slightly different results from the others: if there are any empty lines at the top of the body, cat -s will keep one. The echo and sed suggestion will remove all empty lines from the top and, like cat -s, keep one at the bottom. 15.5 Modifying: shuffling headers always to same order [phil] To sort the headers in the message into predictable order, you can use following recipe. The spaces have been eliminated between the `-I' and its argument in the above. The shell may or may not allow unquoted spaces in the second part of the ${variable:+blah}. For example, under solaris 2.6, /bin/sh barfs on ${FROM:+-I "From: $FROM"}, while /bin/ksh handles it just fine. I think the POSIX shell standard requires that it be allowed, but, well, will your _next_ system be POSIX compliant? :0 * ()\/^From: +\/.* { FROM = $MATCH } :0 * ()\/^Reply-To: +\/.* { RT = $MATCH } :0 * ()\/^X-Mailer: +\/.* { XM = $MATCH } :0 * ()\/^Message-Id: +\/.* { MID = $MATCH } :0 * ()\/^Date: +\/.* { DATE = $MATCH } :0 * ()\/^To: +\/.* { TT = $MATCH } :0 * ()\/^CC: +\/.* { CC = $MATCH } :0 * ()\/^Subject: +\/.* { SUBJ = $MATCH } :0 fh w | $FORMAIL \ ${XM:+-I"X-Mailer: $XM"} \ ${TT:+-I"To: $TT"} \ ${FROM:+-I"From: $FROM"} \ ${RT:+-I"Reply-to: $RT"} \ ${CC:+-I"Cc: $CC"} \ ${MID:+-I"Message-Id: $MID"} \ ${DATE:+-I"Date: $DATE"} \ ${SUBJ:+-I"Subject: $SUBJ"} 15.6 Service: Auto answerer to empty messages [elijah] Here is piece of code that responds to empty messages. :0 B * ! ... | (echo "From: me@here.com" ; \ $FORMAIL -r -A"Precedence: junk" \ -A"X-Loop: me@here.com" ; \ echo "Your blank message was received.\n" \ "Did you mean to say something?\n" \ "\n" \ "-- \n" \ "My Signature\n" \ "this has been an automated response\n" \ ) | $SENDMAIL 15.7 Service: File server -- send fileas as attachments upon request This section is here only for indexing purposes. The File servers are described in the #REF #procmail_module_list; Procmail module list; 15.8 Service: Ping responder Sometimes I'm on the road and I don't seem to get access to the site where my messages are. The telnet connection fails and standard unix "ping" plays dead for me. "What's happening in that site?" I wonder. Here is a recipe that I have added to all of my accounts. It sends an immediate reply if at least the mailhost is up and gives some status information. :0 * ^Subject: ping$ { :0 fh | $FORMAIL -rt # Remember, Don't send back anything that would be vital to # attacker. It doesn't matter if the `uptime` or other # scripts fail, the reply is sent anyway. :0 c # Record this ping request | ( cat -; \ echo `uptime`; \ echo "$HOST User count: " `who | wc -l`; \ ) | $SENDMAIL :0 : # or sink to $DEFAULT $PING_SPOOL } 15.9 Service: simple vacation with procmail Don't forget to look into procmailex(5) man pages which also has vacation example. The ones presented below may not work for you. Here is a very simple vacation recipe. Whenever the file ~/.vac exists, the vacation program is called. Be sure that you have the ~/.vacation.msg file ready too. Remember that `vacation' does not _save_ you messages; so we need `c' flag here. # Some prefer the non-dotted file which shows up in ls listing vacationFlagFile = $HOME/.vac :0 wc *$ ? $IS_EXIST $vacationFlagFile | vacation $LOGNAME Some people like to raise a flag in .procmailrc instead of creating a file. If you like the variable approach better, here is the equivalent implementation of the above VACATION = "yes" # Comment this when not in vacation :0 wc * VACATION ?? yes | vacation $LOGNAME [philip] and [era] Since vacation only sends replies -- it never sends the original # messages, one way to do two things with your .forward file. Substitute "abc" with your login name. |/usr/ucb/vacation","exec /usr/local/bin/procmail -f- ||exit 75 #abc 15.10 Service: vacation code example [By Eric Black ] Here is the procmail part OFFSITE = "my_guest_login@wherever.I.am" # Forward urgent mail to me at my offsite address; afterward, # continue processing it as normal The procmail pattern match # may be case-insensitive, in which case this rule could be # simplified... :0 c * ^Subject: .*urgent | $SENDMAIL $OFFSITE # Use "vacation" to tell other people I'm not here To enable, # un-comment the next two lines; to disable, comment them out # # The -a Identifies another name that can legitimately # appear in the To: line of the mail header instead # of your login name :0 wc | vacation -a ericb eric And here the ~/.vacation.msg file Subject: I'm out of town for a while From: eric (via the vacation program) I'm out of town until . Your mail regarding "$SUBJECT" will be read when I return, or possibly at some unknown time before then if I get a chance to check for email. If your message must be seen by me before I return, you can send it with the word "URGENT" in the subject header. Such mail will be automatically forwarded to me so that I see it sooner. --Eric 15.11 Service: Auto-forwarding [timothy] I have my .procmailrc setup to forward email to another (email only) account. When I am not going to be at the account, I want to turn forwarding off # look for the file to tell us whether or not to forward mail # if the file exists, forward the mail # or not ELSWHERE = "me@elsewhere.com" FILE = "$HOME/.forwardmail" :0 c *$ ? $IS_EXIST $FILE ! $ELSWHERE # if a message arrives from the other account # with the Subject 'forward-off' then remove the # file, effectively turning off forwarding :0 hwic *$ ^From:.*$ELSWHERE * ^Subject: forward-off | $NICE mv -f $FILE $FILE.off # if a message arrives from the other account # with the Subject 'forward-on' then remove the # file, effectively turning off forwarding on :0 hwic *$ ^From:.*$ELSWHERE * ^Subject: forward-on | $NICE mv -f $FILE.off $FILE 15.12 Service: forward only specific messages Here is piece of code that triggers forwarding according to addresses. If you have lot of these kind of forwarding, you should use simple `awk' database which you would grep. # By Jim Hribnak # info@domain1.com goes to joe@domain1.com # info@domain2.com foes to fred@domain2.com :0 * ^TO_()info@domain1.com\> { FORWARDTO = "$FORWARDTO joe@domain1.com" } :0 * ^TO_()info@domain2.com\> { FORWARDTO = "$FORWARDTO fred@domain2.com" } :0 fhw * FORWARDTO ?? @ * ! ^$MY_XLOOP | $FORMAIL -A "$MY_XLOOP" :0 a ! $FORWARDTO 15.13 Service: Making digests # By # Add this message to the digest accumulator :0 c: | $FORMAIL -k -X From: -X Message-Id -X Date -X Subject >> $DIGEST #Check size of digest, and send it off if it's big enough :0 * $ -$DIGSIZE ^0 * $ `wc -l <$DIGEST` ^0 | $NICE send-digest $DIGEST 15.14 Kill: killing advertisement headers and footers A mailing list that I subscribe recently began adding a block of "boiler plate" text to the beginning and end of every message that goes through the list (groan). The text is always the same, and is always at the beginning and end of the message. [david] sed could do both at once, but the problem is that sed never knows when it is N lines from the end if N>0; it knows the last line when it reads it, but when it is looking at the next-to-last line it doesn't know that there is only more one line to come. It does, however, know how many lines of input it has already read. So I have three suggestions: if you know that the header is X lines long [let's say 5 for this example] and that the first line of the footer contains some string or pattern that will not occur in the significant part of the post, :0 fbwi * conditions | sed -ne 1,5d -e '/pattern/q' -e p If you recognize the end by the last line that you want to keep instead of the first line that you want to delete, omit the n option and the p instruction: | sed -e 1,5d -e '/pattern/q' Finally, if the only reliable way to spot the footer is by reaching so many lines from the end (because any search pattern might occur in the real text as well), we can score as you've been doing to get the number of the last significant line. Let's say the footer is three lines long; because ^.*$ always counts one line too many (long story), we subtract four instead of three: :0 fbwi * conditions * 1^1 B ?? ^.*$ * -4^0 | sed -e 1,5d -e "$="q 15.15 Kill: simple killfile recipe with procmail Kill files are widely used with newsreaders to delete uninteresting posts when you enter a newsgroup. A kill file usually contains one single entry per line to match the message content and this can be easily done with procmail. Remember however that for every message procmail forks a process, so before you apply the killfile rules to the messages, be sure your recipes are in this order: the killfile rules are applied only to *unknown* messages SINK MAILING-LISTS SINK ANNOUNCEMENTS SINK WORK MESSAGES OTHER DELIVERIES apply killfile rules and UBE recipes to the rest Recipe will drop the message (i.e. consider it 'delivered') if one of its headers matches a pattern in killfile. :0 hW: $HOME/.killfile$LOCKEXT | egrep -i -f $HOME/.killfile The reason why there is explicit lockfile is that you must be able to update the killfile while your procmail is running. An example edit script is presented below. #!/bin/sh # program: killfile.sh # file=$HOME/.killfile lock=$file.lock cp $file $file.tmp emacs -q $file # or use whatever you prefer: vi, pico lockfile $lock mv $file.tmp $file rm -f $lock 15.16 Kill: duplicate messages [Lars Kellogg-Stedman ] Put this as a first entry in your .procmailrc and you won't see any duplicates as long as the 8K cache doesn't get full. The duplicates folder is cleaned out weekly via a cron job. While it may be tempting to simply sink duplicates to /dev/null, I have come across broken mail clients the stick the same value in the `Message-id' header of all outgoing mail. :0 * ^Subject:\/.* { SUBJECT = $MATCH } MID_CACHE_LEN = 8192 MID_CACHE_FILE = $PMSRC/msgid.cache MID_CACHE_LOCK = $PMSRC/msgid.cache$LOCKEXT LOCKFILE = $MID_CACHE_LOCK # IF the message has a message-id header # AND formail -D is successful (exit status=0) # THEN # log a message to the procmail log # sink the message :0 * ^Message-Id: * ? $FORMAIL -D $MID_CACHE_LEN $MID_CACHE_FILE { LOG="dupecheck: discarded message, $SUBJECT $NL" :0 # Store duplicates, notice no lock! duplicate.mbox } LOCKFILE # Release lock by killing variable And here is a bit simpler recipe, a slightly modified version from the [manual]. Procmail notices formail's success, considers the message delivered and does not stop processing the rcfile due to `c' flag, which let's a message to fall into safety copy inbox. :0 hWc: $PMSRC/pm-msgid.cache$LOCKEXT * ^Message-id: | $FORMAIL -D 8192 $PMSRC/pm-msgid.cache :0 a: duplicate.mbox There was a pretty heavy thread around September 1997 about duplicate detection, where some promising stuff was posted. One item you should definitely have in your collection is Eli's `hashd' Matt Saroff also started a thread about duplicates: where several of the replies are also helpful. 15.17 Kill: spam filter with simple recipes [Ed McGuire ] Seeing several junk mail filters posted recently, varying from the simple to the complex, I thought I would also share my own. I junk whatever comes from my ISP but is not addressed to my domain or to one of the mailing lists I subscribe to. # 1. mail to my domain # 2. NOT addressed to me directly # 3. NOT coming from mailing lists I'm subscribed to. 0: * ^(received):.*psi\.com * ! ^((apparently-)?to|cc):.*(i2|intellection)\.com * ! ^(to|cc):.*(pdp-?8-lovers|procmail|sunshine|info-pdp11) junk.ube.mbox [Gordon Matzigkeit ] I have just discovered an effective rule for separating SPAM from the rest of my e-mail. Just substitute your username for `gord' in the line below # Anything which is not addressed to me is probably SPAM. :0: * !^TO().*\ junk.ube.mbox This only works because I handle all mailing list addresses above that point in my .procmailrc (i.e. all traffic that arrives from mailing lists that I am subscribed to goes into other folders). Most SPAMmers seem to do it nowadays by sending mail via mailing lists, rather than creating huge `To' lists of users Many times sysadm install a list of know addresses that send spam and then they check the incoming mail against the "black list". Keep in mind that that some `fgrep' implementations have a problem with the -w word switch. Note that the above recipe scans the FULL HEADER, so use it with some caution, i.e., be careful what you add to your list of spam domains. # by [philip]; egrep would do here too, if it is posix # compliant, it may have -f switch that makes it behave # like fgrep. # # Note: option -F would make [ef]grep to search fixed string # instead of regexps. # BLOCK_FILE = $HOME/Mail/DeniedNames.lst UBE_MBOX = $HOME/Mail/junk-ube.mbox # To filter out the Subject lines, so that emails sent # with the subject "Have you received a message from # blah-blah@spam" don't get filtered. # [era] suggested we use formail # # Edsel Adap agrees there is a # likely bug in Solaris 2.5.1 "/usr/bin/fgrep -i" and # suggested the use of /usr/xpg4/bin/fgrep instead. # # Sun Microsystems Developer Support # Files in /usr/xpg4 are available via the SUNWxcu4 package, # which is part of the user, developer, all, or Xall Solaris # clusters. # # Solaris 2.4 doesn't have /usr/xpg4/bin/fgrep :-(, you # must use `tr A-Z a-z' before piping the message to fgrep. :0 hw: *$ ? $FORMAIL -ISubject: |fgrep -i -f $BLOCK_FILE $UBE_MBOX The file DeniedNames.lst is simply a list of addresses 82338201@compuserve.com Dwnliner@ix.netcom.com Emerald@earthstar.com FreeWay@dm1.com 15.18 Kill: (un)subscribe messages I'm getting tired of those pesky (un)subscribe messages that certain "other" mailing lists seem to pass through to the list at large instead of capturing them at the list server, like SmartList does. [Adam Shostack ] The following do help, although they're often too broad. (I use a .safe rule to cover those cases) The < 1000 is a useful hueristic. It's rare that unsubscribe messages are long. :0 : * (Delete|u*n*Sub(s| )*| add | leave | help ) * < 1000 junk.misc.mbox [Rodger Anderson ] I've been working on a recipe to filter out those pesky s*bscribe and uns*bscribe messages from mailing lists, and I'm posting what I have so far. As an aside, it also filters out very short messages, which I've found are usually some sort message meant for list owner/request address. I give heavy weight to Subjects starting with (un)?s*bscribe, with also pretty heavy weight to Subjects containing either of those words. I then give heavy weight to the body of messages starting with those words, and a lighter weight to lines starting with them. Then multiple occurrences get some weight too, up to a point. Then I count the words in the message against all that. :0 B * 1^0 * 30^0 H ?? ^Subject: +(un)?subscribe\> * 20^0 H ?? ^Subject:.*\<(un)?subscribe\> *$ 20^0 ^^$SPCNL*(un)?subscribe\> *$ 10^0 ^$SPC*(un)?subscribe\> * 8^.4 \\<(un)?subscribe\> * -.4^1 \\<$a+\> junk.misc.mbox [Adam Shostack ] How about looking for sub & unsub, as well as a perennial misspelling 'unsuscribe me'? I also find filtering on add, leave and help to be useful. This may well be the only word on the line. I think it has to do with broken list management packages. | :0B | * 1^0 | * 30^0 H ?? ^Subject: +(un)?subscribe\> * 20^0 H ?? ^Subject: +(un)?sub?(scribe)?\> (The B is often missing, as is the word fragment 'scribe') | * 20^0 H ?? ^Subject:.*\<(un)?subscribe\> * 20^0 H ?? ^Subject: +(add|leave|help)$ # fewer points if more words * 15^0 H ?? ^Subject: +(add|leave|help) [david 1998-10-20] You want to match on messages where the first non-blank thing in the body is "unsubscribe" at the end of a line, where there are five lines or fewer in the body? :0 B *$ ^^$SPCNL*unsubscribe$ * 7^0 * -1^1 ^.*$ junk.misc.mbox ^.*$ always counts one line too many, so a five-line body will be counted as six; that's why we need a prejudice of 7. But if the first non-blank text in the body is "unsubscribe" alone on a line, is a line count really necessary? True posts that include the word will have it in the middle of a sentence, such as the preceding one. What you'll find by specifying a line limit is that unsubscribe requests with long signatures or attachments at the bottom of a previous message will get through. 15.19 Time: Once a day cron-like job [Bill Moseley ] If you want to do something only once a day, they you have to store the date somewhere and check against that stored date. YYMMDD_FILE = $HOME/.yymmdd YYMMDD = $YY-$MM-$DD # Contains single line of procmail code # YYMMDD_PREV = .. INCLUDERC $YYMMDD_FILE # If different date, then enter this block # The echo updates stamp in file. :0 *$ ! YYMMDD ?? ^^$YYMMDD_PREV^^ * ? echo "YYMMDD_PREV = $YYMMDD" > $YYMMDD_FILE { ...do the cron jobs.. } 15.20 Time: Running a recipe at a given time If I put a program to my recipes, it will be executed every time message arrives. That's a problem, and I'm not allowed to use cron in this account. I'm looking for some sort of condition to check the current time and if its outside of the hours 11pm and 7am then execute the action. [david] How do your From_ lines look? If they're the traditional kind that sendmail and smail add, they include the local time on your system at receipt. So include a check that the hour is between 07 and 22 inclusive, like this: :0 c * ^From .*some-address.* (0[789]|1.|2[012]):[0-5][0-9]: | command I included the minutes and the colon that separates the minutes from the seconds so that the expression for testing the 07-22 range can match only on the hour. 15.21 Time: Triggering email and using cron [david] Put something like the following entries in your personal crontab for your userid (and not knowing if you particular cron "cd's" to your home directory first): 0 23 * * * touch $HOME/.mail.relay.on 0 7 * * * rm -f $HOME/.mail.relay.on And if your cron doesn't know the HOME variable (that'd be an exception) 0 23 * * * /bin/csh -c 'touch ~LOGNAME/.mail.relay.on' 0 7 * * * /bin/csh -c 'rm -f ~LOGNAME/.mail.relay.on' Then, in your .procmailrc do: :0 c * ^From.*some-address *$ $IS_FILE $HOME/.mail.relay.on | command the script will run_my_program only if both the subject matches and the file test succeeds. The file test will succeed only between 11pm and 7am. In all honesty, if system gives usable From_ lines, I like following suggestion better. I use it all the time to turn blocks of procmail code on and off at given times or dates, and it works likes a charm. It uses many fewer processes and is less likely to get the status wrong if for any reason one of the cron jobs fails to run or doesn't do its job. This pages only at day time :0 c * ^From .*some-address.* (0[789]|1.|2[012]):[0-5][0-9]: | command This pages at night :0 c * ^From .*some-address.* (0[0-6]|23):[0-5][0-9]: | command 15.22 Decoding: Uudecode [philip] here is piece of code to do uudecode match when certain condition is matched. The magic string here is "begin ...file", the *body* is then fed to `my_uudecode_program' whatever it does to it. :0 b * ^From:.*someone@somewhere\.com * ^Subject: Subject * B ?? ^begin 644 file.tar.gz | my_uudecode_program 15.23 Decoding: MIME # by Peter Galbraith # MIME filtering of accented characters and split lines. # :0 * ^Content-Type: *text/plain { :0 fbw * ^Content-Transfer-Encoding: *quoted-printable | mimencode -u -q :0 A fhw | $FORMAIL -I "Content-Transfer-Encoding: 8bit" :0 fbw * ^Content-Transfer-Encoding: *base64 | mimencode -u -b :0 A fhw | $FORMAIL -I "Content-Transfer-Encoding: 8bit" } # 1995-10-18 Tim Pickett # # Decode MIME quoted-printable Content-Transfer-Encoding # # Conditions # # Mail has a MIME-Version header with a number in it. # Header saying "Content-Transfer-Encoding: quoted-printable" # exists :0 *$ ^MIME-Version:$s*$d*(\.$d*) *$ ^Content-Transfer-Encoding:$s*quoted-printable { :0 fhw # Remove header | $FORMAIL -I"Content-Transfer-Encoding:" :0 fbw # Decode the body. | mmencode -u -q } 15.24 How to send commands in the message's body :0 b * ^Subject: ARCHIVE | sed -e '/$s*[^a-zA-Z]/,$ d' | sh 15.25 Matching two words on a line, but not one How does one write a recipe that will do this: Put mail in mailbox which has a line with two string (one and two) like: one two but save mail in error-folder if the line as only the first string like: one (string two is missing) [philip] I presume these lines would be located in the body of the message, and that by "space between one and two" you mean "whitespace between one and two". If those assumptions are wrong then you'll need to tweak the following recipes: # The 'B' tells procmail to look in the body instead of the header. # The second colon tells procmail to lock the mailbox with a # locallockfile -- if mailbox is a directory then you don't need # it. The brackets in the condition contain a space and a tab. # :0 B: *$ one$s*two default.mbox :0 B: * one error.mbox Now, the above will match even if "one" or "two" is part of another word (at the end in the case of "one" and at the beginning in the case of "two"). If you don't want that then you'll need to change the recipes to read: :0 B: *$ ()\ default.mbox :0 B: * ()\ error.mbox 15.26 How to define personal XX macros? By macro, I'm referring to the procmail's FROM_DAEMON, TO and TO_ that you can use in matches. Here is one way to make one's own macro [alan] Define HEADERS to include those headers you care about. Pick one of the definitions below (and remove or comment out the others). Here are three ways to define user `to_' macro . use only To: . use either To: or Cc: . To:, Cc:, or Apparently-To: to_ = '^To:(.*\<)?' to_ = '^(To|Cc):(.*\<)?' to_ = '^((Apparently-)?To|Cc):(.*\<)?' And you use it like this :0 : *$ $to_()foo@bar.com address-matched.mbx [jari] and here are some more examples cc_ = "(^((Original-)?(Resent-)?(Cc|Bcc)):(.*[^a-zA-Z])?)" from_ = "(^(Apparently-|Resent-)*\ (From|Reply-To|Sender):(.*\<)?|\ ^From $NSPC+)"} 15.27 How to change subject by body match Suppose you to change the email's subject when there is a match in the body. The desired outcome would be this: From: foo@this.is Subject: Fault: NNNN in program block YYY << changed Fault: NNNN in program block YYY Here is the answer :0 fhw * ^Subject: NOK case report *$ B ?? ^$s*\/Fault: [0-9a-f]+ in program block.* | $FORMAIL -I "Subject: $MATCH" 15.28 How to change Subject according to some other header Suppose you want to change the subject when mail comes to some particular address; or when some other header field. Here is one way to do it, we suppose that mail comes to various internal mail addresses. See the HEADERS macro in previous section. # By [alan] # Examine headers, create a subject tag if we recognize a list TAG = "" :0 * $ ${HEADERS}info@foo.com { TAG = "info" } :0E * $ ${HEADERS}check@foo.com { TAG = "check" } # ...and so on... # now, if TAG is set, insert it into the subject MATCH # kill this :0 fhw * ! TAG ?? ^^^^ * ^Subject: *\/[^ ].* | $FORMAIL -I "Subject: $TAG - ${MATCH:-}" *Or* you could use the command line arguments, add following line to your `.forward'. (alias file syntax) foo: "|/usr/local/bin/procmail -m /usr/local/etc/pm-tagit.rc foo" Then in `tagit.rc' you would instead say: ARG = $1 :0 * ARG ?? ^^foo^^ { TAG = "foo@go" } :0 * ARG ?? ^^somethingelse^^ { TAG = "somethingelse@go" } This method will work even if someone Bcc:s a message to foo@some.com. 15.29 How to call program with parameters ...now, suppose I want to call `program' with parameter $FOUND, and get the result back in RESULT, how do I do it ? The stdout of myprogram will be captured at stored in the variable RESULT. Also consider what should happen if there are spaces or tabs in the value of $FOUND. Perhaps it should be better off enclosed with quoted. # Make sure FOUND is not empty before passed to program :0 * ! FOUND ?? ^^^^ { RESULT = `program "$FOUND"` } 16.0 Miscellaneous recipes 16.1 Matching valid Message-Id header [philip] wrote full RFC compliant matcher. Follow the link dq = '"' # (literal) double-quote bw = "\\" # (literal) backwhack ws = "[ ]*" # whitespace atom = "[-!#-'*+/-9=?A-Z^-~]+" word = "($atom|$dq([^$dq\]|$bw.)*$dq)' local_part = "$word($ws\.$ws$word)*" domain = "(\[$ws([^][\]|$bw.)*$ws\]|$atom($ws\.$ws$atom)*)" :0 * ! $ ^Message-Id:$ws<$ws$local_part$ws@$ws$domain$ws> thats-non-valid-message-id 16.2 Sending two files in a message If you plan to send multiple files in a message, be sure that every file has extra blank line at the end so that they can be *cat*d together. Instead of doing (cat THIS; echo " "; cat THAT ) | $SENDMAIL You do (cat THIS THAT ) | $SENDMAIL But sometimes you don't have control over the files, then you can do this to make sure there is blank line. Notice, only two processes used compared to first choice. (echo '' | cat THIS - THAT ) | $SENDMAIL [David] And an sed expert would do it this way (sed -e '$ !b' -e '/./G' -e "r THIS" THAT ) | $SENDMAIL o $: the last line o !: everywhere except the range (in this case, everywhere except the last line) o b: branch to a label. No label: branch to the end (and, since -n is not in effect, print the pattern space) Now remember that everywhere except the last line, we've skipped ahead, so the rest of the code will be executed only for the last line of the input. o /./: on lines that contain a character (but we get here only for the last line, so on the last line if it contains a character) o G: append a newline and the contents of the hold space to the pattern space (the hold space is empty, so basically, if the last line was already empty, do nothing, but if the last line was not empty, append a newline and thus add a blank line after it). o r file: After finishing with this run through the sed instructions, read the named file and copy it to the output. This side of sed comes out only after sed has had a few drinks... 16.3 Excessive quoting of message [25 Nov 1997 buck@Compact.COM] I administer a LISTSERV mailing list and our host has asked us to reduce excess quoting of previously posted material. ...Subject: asking if this was excessive quoting. With the weights below, this extra copy will activate at 66% quoted lines of all body lines. [era] I would definitely tolerate 75% quotes. And in the end, you will of course always have to face the kinds of people who would rather change their quoting style to evade such constraints than quote less. An idealized quote parser should perhaps realize that a non-blank prefix that recurs on a lot of lines is probably a customized quote string. This will preserve the correspondent's original subject (with a Re: added if it didn't already have one) and thus the template text should indicate the nature of the problem. I'm not sure what would be appropriate to generate behaviour more like I suggest below, any takers? Perhaps no score at all for empty lines, neutralize .signatures (hope sender obeys "-- " convention) and add 10^0.5 for each quoted line and dish out -15^0.3 for nonquoted? (I haven't really explored this -- could be completely up the creek.) [Also, perhaps long runs of quoted material should be penalized harder than quoted snippet -- reply text -- quoted snippet -- reply text alternations?] COPY_ADDRESS = "listAdm@foo.com" :0 * ^Sender: { # - quoted lines # - non-blank, non-quoted lines # - completely blank lines :0B *$ 10^1 ^$s*> *$ -15^1 ^$s*[^>$WSPC] *$ -15^1 ^$s*$ { # You don't need to repeat the original condition here # You also don't really need to extract SENDER # Generate a reply with appropriate headers and the # body quoted :0 fhw | $FORMAIL -rtk -A "Bcc: $COPY_ADDRESS" # Now "replace" the body with template text + body (In # other words, add the template before the quoted body) :0 fbw | cat $HOME/template.txt - # Now send it off to recipients mentioned in generated # header ! -t } # Wasn't excessively quoted; save it :0 : $SOME_MBOX 16.4 Sending message to pager in chunks I have a 200 character limit on my pager. But I have wordy contacts who go over that limit. What I would like to do is have a recipe split up messages addressed to my pager into 200 character (max) messages. [era] This stuff about forwarding to pagers is a recurring topic on this list. I've tried to find a good summary of all the issues but there always seems to be some tiny twist to what people would like to have implemented. As a general comment for future generations, the Procmail part is usually trivial and the problem reduces to writing a good program (shell script or otherwise) for formatting the text precisely the way you want it, and spitting it out in suitable chunks. Here's something to split up the body of the message into smaller chunks and do a shell script on each chunk. The -s option to fold says to only wrap lines on whitespace if possible # Create a duplicate of the message to forward to the pager. # This will be reformatted and have most headers stripped off. :0 c { # Construct header with only From: and Subject: retained HEADER = `$FORMAIL -XFrom: -XSubject:` # Reformat body as 200-character lines and send each # as a separate message with the preconstructed minimal # header :0 bw | tr '\012' ' ' | fold -s -w 200 | while read line; do echo -e "$HEADER\n\n$line" | \ $SENDMAIL pageraddress@wherever.com ; done } If your version of echo doesn't understand \n to mean newline (and/or the -e option to enable this escape processing), you need to tweak this. (You might need to anyway -- this is mostly untested. In my limited testing, I found the messages would arrive in more or less random order. Inserting pauses in the script should help to some extent, but could lead to other problems and is not an ideal solution anyhow.) I don't know if the header trimming is required; some pager gateways appear to count the headers as part of the message, while others don't. Again, for future generations, details like this are relevant to include when you ask about how to do this. 16.5 Playing particular sound when message arrives [Peter S Galbraith ] Here is the command in shell to produce the sound: % cat anyfile | /usr/X11R6/bin/auplay /usr/lib/exmh/drip.au However, it won't work directly in the recipe procmail: Executing "/usr/X11R6/bin/auplay /usr/lib/exmh/drip.au" Can't connect to audio server Strange. The command works from the shell if I `su' to user `mail'. Anyway, I got it to work by fully specifying the audio server (which is my workstation, where I receive mail) AU = /usr/X11R6/bin/auplay TUNE = /usr/lib/exmh/drip.au :0 hwic * ^From:.*foo@bar.com | cat > /dev/null; $AU -audio tcp/mixing:8000 $TUNE 16.6 Combining multiple Original-Cc and Original-To headers How can I use procmail/formail to combine the information in these headers into their *CORRESPONDING* header MINUS the Original-* Note that I can have multiple Original-Cc: headers and I want all the recipients combined into one Cc: header. # 1998-01 by [david] # initialize as unset ORIG_TO ORIG_CC # The -c option to formail takes care of headers continued onto # indented lines; the pipe to tr takes care of multiple # Original-To: headers by linking their contents with commas. :0 * ^Original-To:.*[^ ] { ORIG_TO = `$FORMAIL -zcxOriginal-To: | tr \\12 ,` } # Drop trailing comma from tr: :0 A * ORIG_TO ?? ,^^ * ORIG_TO ?? ^^\/.*[^,] { ORIG_TO = $MATCH } # Likewise for Original-Cc: lines: :0 * ^Original-Cc:.*[^ ] { ORIG_CC = `$FORMAIL -zcxOriginal-Cc: | tr \\12 ,` } :0 A * ORIG_CC ?? ,^^ * ORIG_CC ?? ^^\/.*[^,] { ORIG_CC = $MATCH } # Now, let's install the changes if needed: # with -A instead of -I or -i it should # not clobber existing To: or Cc: information. # -A : Append a custom headerfield onto the header in any case. :0 * ORIG_TO ?? ^^^^ * ORIG_CC ?? ^^^^ { } :0 E fhw | $FORMAIL \ ${ORIG_TO:+-A "To: $ORIG_TO"} \ ${ORIG_CC:+-A "Cc: $ORIG_CC"} 16.7 Forwarding sensitive messages in encrypted format Please note that the standard Unix `crypt(1)' command is not secure, as it uses a modification of the Enigma engine, which was broken by the Benchley Park guys (Turing and the rest) back during WWII, using a mechanical relay based computer. As such, it is trivially easy to break using any computer more resent than a Radio Shack TRS-80. Poke around in any of the comp.sources.unix archives, they had a "Crypt Breaker's Workbench" posted well over a decade ago. For similar reasons, I can't recommend single-pass 56-bit DES anymore either. Triple-DES (with an effective 112-bit key) looks safe, as do any of the encryptions provided with PGP. # by [alan] # See if addressed *directly* to me, and .. # ..has not already been forwarded KEY = "TheMagic" FORWARD_EMAIL = "foo@bar.com" :0 * $ ^To:.*$LOGNAME(@|[^0-9a-z]|$) * $ ! ^$MY_XLOOP { # now let's encrypt the body using mimencode :0 fbw | echo "MIME-Version: 1.0" ; \ echo "Content-Type: application/crypt" ; \ echo "Content-transfer-encoding: base64" ; \ echo "" ; \ crypt $KEY | mimencode -b # Now let's prepare the headers for forwarding the mail, # and mark it so we don't loop :0 fhw | $FORMAIL -I"Resent-To: $FORWARD_EMAIL" -I"$MY_XLOOP" :0 ! $FORWARD_EMAIL } 17.0 Procmail and PGP 17.1 Decrypt pgp messages automatically _Warning_: if you use remailers or anonymous services, you must use different passwords and different user id's to decrypt incoming messages. If you just receive messages encrypted with one key, then you this may be useful to you. However, it is generally considered a huge security risk to keep your password carved into your .procmailrc. :0 fbw * B ?? PGP ENCRYPTED MESSAGE | pgp -z "your pass phrase" -f +batch 2>&1 17.2 Getkeys from keyserver # by Adam Shostack 1996-02 # # This first ruleset protects me from mailbombs from an automated # service that I often send incorrect commands to, generating 5mb # of reply. It also sorts based on success of the command. # # swissnet.ai.mit.edu is fast keyserver :0 * From bal@swissnet.ai.mit.edu { :0 h * >10000 /dev/null :0 h *^Subject:.*no keys match /dev/null :0 E | pgp +batchmode -fka } 17.3 Auto grab incoming pgp keys # [Opher Kahn ] This first ruleset protects # me from mailbombs from an automated service that I often send # incorrect commands to, generating 5mb of reply. It also sorts # based on success of the command. # # swissnet.ai.mit.edu is PGP key server :0 * From bal@swissnet.ai.mit.edu { :0 h * >10000 /dev/null :0 h *^Subject:.*no keys match /dev/null :0 E | pgp +batchmode -fka } # auto key retrieval # # I have an elm alias, pgp, points to a keyserver The logfile # gets unset briefly to keep the elm lines out of my logfile. :0 W * B ?? -----BEGIN PGP * H ! ?? ^FROM_DAEMON { KEYID = `/usr3/adam/bin/sender_unknown` } LOGFILE= # #todo: We should get rid of the 'elm' dependency here. # #todo: correct this sometime... [jari] # :0 ahc * ! ^X-Loop: Adams autokey retrieval | $FORMAIL -a"X-Loop: Adams autokey retrieval" | elm -s"mget $KEYID" pgp #!/bin/sh # # Script: sender_unknown # # unknown returns a keyid, exits 1 if the key is known. $output # is to get the exit status. Otherwise, this would be a one # liner. OUTPUT=`pgp -f +VERBOSE=0 +batchmode -o /dev/null` echo $OUTPUT | egrep -s 'not found in file' EV=$? if [ $EV -eq 0 ]; then echo $OUTPUT | awk '{print $6}' fi exit $EV # end of sender_unknown 18.0 Includerc usage 18.1 Using: multiple rc files ...Do INCLUDERC statements function as a kind of "call" which returns control to the "original" rc file if processing falls off the end of the included rc file? Or if processing falls off the end, does mail then get delivered to $DEFAULT and processing stop? Suppose I have these commands INCLUDERC = $PMSRC/pm-a.rc INCLUDERC = $PMSRC/pm-b.rc INCLUDERC = $PMSRC/pm-c.rc Yes, the control is returned to the original file where the includerc was called from. And No, mail does not get delivered in the $DEFAULT because the includerc just ends: processing continues until there is no more statements in the top level. Includerc is nothing more that a sliced top level recipe. 18.2 Using: You can call rc file conditionally One interesting way to prevent false hits when filtering UBE is to try to see if the message comes from some valid destination first. If it comes, then it shouldn't be run through UBE filter, because it may filter valid messages out. No ube filter is completely bullet proof. Here is an example where the UBE detection is put into use only when the message comes from somewhere that I don't know beforehand (or I have just forgot to tweak my .procmailrc) ME = "(me@here.is)" LISTS = "(procmail|list-a|list-b)" :0 # Idea by Bill Moseley *$ ! ^TO_()$ME *$ ! $LISTS { # Could be UBE or I might be on a unknown distribution list. INCLUDERC = $PMSRC/pm-ubecheck.rc } [dan] That would work; common practice, however, is to put recipes for filing mail from lists (and, per Bill's preferences, anything mentioning procmail in the head gets treated the same as mail from this list) first; then the only remaining condition to consider there would be unexpected blind carbons: * ! ^TO_moseley. This method is good if you get much more spam than legitimate mail (including mail from list subscriptions as legitimate) and you want procmail to deal with spam right away. I belong to several very active mailing lists, so I actually receive more pieces of legitimate mail than pieces of spam. One way to get the best of both worlds is this: * $ ! ()\/(^TO_$LOGNAME|procmail|list-(ABC|123|XYZ)) because then, if the regexp matches (and thus the negated condition fails and you don't detour into $PMSRC/checkspam.rc), MATCH is already set to the name of the mailing list, and you can do further tests by just examining MATCH (or a variable you copy it into) instead of a repeating a complete head search. [I prefer to use the variable $LOGNAME rather than hard-coding my name because then others can use the code, and I can use it unchanged on sites where my logname is different, and if my logname is changed my .procmailrc will keep up with it.] For example (I've separated the conditions into two lines so that, per Bill's preferences, a mention of procmail in the head will get the message into the Procmail List folder, even if a match to $^TO_$LOGNAME is also present and appears sooner): :0 * ! ()\/(procmail|list-(ABC|123|XYZ)) * $ ! ^TO_$LOGNAME { INCLUDERC=$PMSRC/pm-ubecheck.rc } # The next recipe has an `E' flag, so it will be examined # only if the preceding one didn't match; thus if $MATCH was # set inside pm-ubecheck.rc, it won't hurt anything here, and a # value for $MATCH set in pm-ubecheck.rc # won't be mistaken for a list name: :0 E: # MATCH is non-null only if it matched a list name * MATCH ?? (.) $MATCH # Remaining recipes will be read only for two types of mail: # those that met $^TO_$LOGNAME but not any expected list # name, and those that went through pm-ubecheck.rc but came out # undelivered. 18.3 Autoloading an rc file Now when you know that includerc can be called conditionally, let's discuss about "autoloading of module". For example I use following statement in nearly all my modules to import predefined variables :0 * ! WSPC ?? ( ) { INCLUDERC = $PMSRC/pm-javar.rc } It says that "If variable WSPC does not contain space, then load module". If the module has already been loaded by some other rc file, the WSPC would exist. If it does not exist yet, then we load the module. This is classical example of conditionally loading functions or variables into current module: Check if feature is present, No? Then load module module. Justin Lloyd suggest a general way of caching the included rc files. We use top-level script that records every module that was included. The module is loaded only if it it not yet included: # pm-xximport.rc :0 * ! INCLUDE_CACHE ?? ()\<$RC\> { # Module was not there yet, add it to the list INCLUDE_CACHE = "$INCLUDE_CACHE$RCFILE$NL" INCLUDERC = $RC } This different approach then the previous one. Instead of checking features, the presense of module is checked. Two sides of the coin which can be used for the same thing. You can pick either solution but to my opinion o Adding extra top level INCLUDE_CACHE is extra work. Procmail must open a separate top-level rc file every time with call RC="pm-xxscript.rc" INCLUDERC=pm-xximport.rc o If feature already existed, you would still have to open the pm-xximport.rc file for every call to find it out. Eg. Here you pm-xximport.rc is called 3 times no matter if 1,2,3 were already present RC="pm-xxscript1.rc" INCLUDERC=pm-xximport.rc RC="pm-xxscript2.rc" INCLUDERC=pm-xximport.rc RC="pm-xxscript3.rc" INCLUDERC=pm-xximport.rc o With simple feature test, procmail can evaluate the condition in place without the need of opening separate file. if no feature present.. then load if no feature present.. then load Note however, that both suggestions accomplish the same thing; the implementation is only different. If the typical count of including RC files per module were big enough, I'd use justin's way. Currently the typical count is only 1-2 (VAR,DATE). 18.4 Making: naming of the rc file When you write an rc file, think whether or not it could be generalized so that others could use it. I have adopted style where all procmail files start with prefix `pm', so that I can stack other files as well to the same directory. If I simply named them as `rc.*', look what happens: % ls rc* # fine, print rc files but I wold like to print all procmail relates files and backup them with one command, so this would print all procmail relates files % ls pm-* --> pm-mytest.rc pm-jaube.rc pm-tips.txt pm-art.txt pm-incoming.log pm-list.mbox # the mailing list I usually use a name like `pm-xxSCRIPT-NAME.rc' for a rc file where `xx' is my initials from firstname and surname, like (J)ari (A)alto. These scripts are product versions, that can be distributed. I also have private scripts that handle my mailing lists, work messages and so on and they have prefix `my'. pm-jascript.rc pm-myscript.rc and when I download someone else's script I would like to see it named so that it's unique to the person who did it. pm-jdscript.rc # John Doe's script. 18.5 Making: Using namespace when saving procmail variables If you're going to write rc file that works like any other programming language subroutine, you must separate it from the world and make it well behaving. A subroutine is traditionally a black box: you call it with arguments and it responds with returned values. You don't need to know what happens in there. And you expect that the subroutine hasn't changed the existing environment, like procmail variables `DEFAULT' `LOGFILE' etc. when it ends. So the process diagram of a good RC subroutine is: pm-xxscript1.rc call --> +------------+ arguments | black | --> it may call | box | other subroutines | | <-- pm-xxscript2.rc output values <-- +------------+ Procmail does not have local variables, so you must put the variables to global namespace. Let's see an example where subroutine uses `MAILDIR' for `chdir' purposes. MAILDIR_xxscript1 = $MAILDIR # save ... MAILDIR = new location ... ...at the end of subroutine MAILDIR = $MAILDIR_xxscript1 # restore Here the original value is saved when subroutine started and the original value was restored when subroutine exited. The global namespace (xxscript1) used was unique and is guaranteed not to clash with anyone else's. If the `pm-xxscript2.rc' would have also used `MAILDIR' the saved value would have been in PROCMAILVAR_xxscript2 and the two wouldn't mix up with each others `MAILDIR'. The general name for saved variable is therefore: PROCMAILVAR_scriptname This follows the simple "onion" or "stack" model, where variable's value is saved before changing it and restored on exit point. save-x-1 set--x-1 save-x-2 set--x-2 .. restore-x-2 restore-x-1 18.6 Making: Public and private variables in rc file As you learned above, the variables should be put to RC file's namespace. The user interface variables (public) should be all caps and private variable should start with lowercase letter. Whether you use "theVarStyle" or "the_var_style" is up to you. [script pm-xxscript.rc] # ........................... public XX_SCRIPT_FLAG = ${XX_SCRIPT_FLAG:-"default"} XX_SCRIPT_VAR = ${XX_SCRIPT_VAR:-"default"} # ........................... private charset = "a-z1-2" regexp = "something-that-matches" Whether you need to stick prefix `xx_script' to the private variables depends on whether you call another includerc which may happen to use same names as you: [pm-xxscript.rc] charset = ... # watch this ... INCLUDERC = .. # call another subroutine charset = .. # holy cow, it used same variable ..back in the pm-script.rc :0 * $charset # BOOM, not what you think. In this case it would be wise a) not to define `charset' at the top of the file but to move the definition to just before the recipe where it is used or b) make the name unique, with `pmScriptCharset'. 18.7 The rules of thumb for constructing general purpose rc file o Write good documentation at the beginning of file: how to set up the includerc and explain what it does. If you don't include docs, people may skip your extraordinary useful script. Also, remember that the script lives in the Net and passes through many hands long after you have been disconnected. o Keep the layout like this: the user interface variables must all be in capital letters. Familiarize yourself with what(1) tags too. Notice the first and last lines: if you keep the format like this, then any universal tool can rip your code from any file (or email), because it's delimited by "pm-xxScript.rc -- " and "end of pm-xxScript.rc". See unix what(1) for first line's syntax. # @(#) pm-xxScript.rc -- procmail script for ... # DOCS USER VARIABLES private variables CODE # end of pm-xxScript.rc o Always include version number or last modification date somewhere. Prefer some version control tool, like RCS, VCS, ClearCase, whatever you have at hand. o Use a variable name like `dummy' in appropriate places to tell what's happening in the code. Remember that the *VERBOSE* setting isn't much help if you can't tell by looking at the *LOG* where on earth the code is executing. dummy = "start of pm-xxScript.rc" ... dummy = "Now testing if we have control message XXX" :0 * condition { dummy = "Now testing if the command is YYY" :0 * condition ... } ... dummy = "end of pm-xxScript.rc" o If you need the value of some common headers, don't just call formail like this because the value may already be available prior your includerc. For example the user may already have needed the *Subject* value and stored it in a variable [in pm-xxScript.rc] XX_SCRIPT_SUBJECT = `$FORMAIL -xSubject:' [User may have already read the content to SUBJECT] SUBJECT = `$FORMAIL -xSubject:' INCLUDERC = $PMSRC/pm-xxScript.rc Your pm-xxScript.rc launches an unnecessary formail call. Instead, use the existing SUBJECT. [user] :0 * ^Subject:\/.* { SUBJECT = $MATCH } ... XX_SCRIPT_SUBJECT = $SUBJECT # Note this! INCLUDERC = $PMSRC/pm-xxScript.rc [ in the pm-xxScript.rc variable definitions ] # User should initialise the variable # XX_SCRIPT_SUBJECT if he already has read the # subject. :0 * XX_SCRIPT_SUBJECT ?? ^^^^ * ^subject:\/.* { SUBJECT = $MATCH } ...the rest of the code o _Add_ header `X-Loop' and test against it if you are sending an automated reply. The `X-loop' prevents responding to already responded message. :0 * condition * ! ^FROM_DAEMON *$ ! ^$MY_XLOOP { # Ok, now we're clear to send an automated reply } 18.8 An includerc skeleton Here is my includerc file skeleton that i use in all my modules. The funny looking ".$" are for the text2html Perl filter. The documentation section can be ripped and turned into html very easily is you just keep the standard 4 tab column positions and start the description with "File id" and end it with "Change Log". The command to make the html is: % ripdoc.pl pm-xxscript.rc | t2html.pl > pm-xxscript.html These two perl files are available from my ftp directory. # @(#) pm-xxscript.rc -- one line description string here # @(#) $Id: pm-tips.txt,v 2.1 1999/12/27 15:13:10 Jari Aalto Exp $ # # File id # # .Copyright (C) 1997-98 Foo Bar # .$Contactid: $ # .$Created: YYYY-MM $ # .$keywords: procmail [subroutine|recipe] whatItDoes $ # # This code is free software in terms of GNU Gen. pub. Lic. v2 or later # You can get newest version by sending email to maintainer with # subject "send " # # Description # # This subroutine Parses from variable INPUT # # Required settings # # PMSRC must point to source directory of procmail code. # This subroutine will include # # o pm-xxScriptA.rc # o pm-xxScriptB.rc # # Call arguments (variables to set before calling) # # o INPUT, the string from where to parse... # o VAR1, description, default is ... # o VAR2, description, default is ... # # Returned values # # ERROR will have value "yes" if couldn't parse INPUT # OUTPUT will have result after successful parse # # Example usage # # :0 # * condition\/.* # { # INPUT = $MATCH # INCLUDERC = $PMSRC/pm-xxscript.rc # # OUTPUT has the result # } # # Change Log: (none) # ..................................................... &init ... dummy = "init: pm-xxscript.rc start" # Read the standard variable definitions if they are not # yet defined: that's "if WSPC variable does not contains space, # as it should, then global variables haven't been read yet" :0 * ! WSPC ?? ( ) { INCLUDERC = $PMSRC/pm-javar.rc } # .................................................... &input ... # - User configurable variables with reasonable defaults # - But parameters like "INPUT" that must be set beforehand # are not mentioned here. VAR1 = $VAR1{VAR1:-"default1"} VAR2 = $VAR2{VAR2:-"default2"} # .................................................... &do-it ... dummy = "subroutine: pm-xxscript.rc parses now that and that" dummy = "subroutine: pm-xxscript.rc end." # end of pm-xxscript.rc 19.0 Mailing list server 19.1 Mailing list server pointers "Meng on procmail" http://res2.resnet.upenn.edu/procmail 19.2 Simple Mailing list server # by Lars Hecking # MAJORDOM = "majordomo-(users|docs|workers)" :0 w * $ ^(Sender|To|Cc):.*\/$MAJORDOM * $ MAJORDOM ?? ()\/$\MATCH | $APPNMAIL $LISTS/$MATCH Here is another, by Brock Rozen with ideas from [dan] # get the date in RFC822 format for insertion into some messages; # the "Resent-Date:" field is copied from the "Date:" field on # some systems. RFC1123 says "All mail software SHOULD use 4-digit # years in dates..." LIST_NAME = "myList" LIST_ADDR = "$LSIT_NAME " LIST_DATE = `date '+%a, %d %h %Y %H:%M:%S %Z'` LIST_ERR = "$EMAIL" # my admin address # Sendmail ignores "To:" in the presence of "Resent-To:" # :0 fhw *$ !^X-List: $LIST_NAME *$ ^TO()$LIST_NAME | $FORMAIL -A "X-List: $LIST_NAME" \ -I "Resent-To: $LIST_ADDR " \ -i "Resent-Date: $LIST_DATE" \ -I "Errors-To: $LIST_ERR" \ -A "Precedence: bulk" \ -A "X-Loop: $COMSAT" :0 a ! -oi `cat /var/tmp/src/power-users.list` 20.0 Common troubles 20.1 Procmail modes: normal, delivery, and mailfilter. ... a) what recipes procmail goes through if there's no /etc/procmailrc on the system b) how it decides whether an address/local-part is valid or not c) how procmail selects the mailbox to drop the email [philip] *Delivery* mode is invoked using the -d flag. All arguments are the -d are usernames. It is usually used by the MTA to deliver mail to users, and indeed, procmail will return failure if it is given an invalid username. In delivery mode, procmail reads /etc/procmailrc before the user's .procmailrc. _Note_: Procmail will work in delivery mode only if it is setuid root, if it is invoked with the ruid of the recipient named in -d, or, under certain OSes where the build routines have determined that it is safe, if the euid is that of the recipient and the egid is the recipient's login group. *Mailfilter* mode is invoked using the -m flag. It accepts only one rcfile as an argument -- other arguments are either variable assignments or arguments that are made availible to the rcfile itself as $1, $2, etc. If the specified rcfile is located under /etc/procmailrcs/ then procmail will take on the uid of the owner of that file. Otherwise, it will run as the user who invoked it. /etc/procmailrc, that procmail -d reads, is ignored. In mailfilter mode, procmail unsets `ORGMAIL' and `DEFAULT' to suppress normal delivery -- reaching the end of the rcfile results in the mail bouncing. If the rcfile sets either of them then procmail will attempt delivery to that mailbox if it falls off the end of the rcfile; however, the mailbox will have to be writable by the uid/user that procmail is running as. _Note_: Only one rcfile can be named on the command line, but names of other rcfiles can be passed in the positional parameters to be used later in INCLUDERC assignments. *Normal* mode is invoked by not using the `-m' or `-d' flags. It accepts any number of rcfiles and variable asssignments as arguments. Procmail runs as the invoking user in this mode. /etc/procmailrc is ignored. So, to answer your questions: if procmail reaches the end of the specified rcfile, it bounces the mail (/etc/procmailrc is ignored). Everything is up to the rcfile -- how to determine whether the address is valid and where to put the message if it is. 20.2 Procmail as sendmail Mlocal mail filtering device ...I'm a new sys admin at my company, and I've been trying to set up Procmail as the mail filtering device (still using mail as the Mlocal) I've tried setting up the sendmail.cf to use Procmail as a filter (we want to use the current mailer as the local mailer) with one local procmail rc file. Procmail seems to work just fine if set up as the local mailer, but I'm still having problems setting it as the filter. [John M Vinopal answers sendmail.cf] R$+ < @ $=a . > $* $#procmail $@ /etc/mail/procmailrc $: $1 < @ procmail > $3 R$+ <@ procmail > $* $1 < @ resort.com .> $2 so this sends anything of the form foo@resort.com through procmail and rewrites it as foo@procmail. the procmail script reinjects it and it bypasses the call to procmail and then is rewritten back to foo@resort.com. /etc/mail/procmailrc: :0 ! -oi -f "$@" 20.3 Procmail doesn't pass 8bit characters You've mistaken. Procmail does not do that to your mail. Frank Gadegast tells you: o procmail wasnt the problem, it was sendmail o I uncommented this line in sendmail.cf and now I get all nice German Umlauts. # strip message body to 7 bits on input? # O SevenBitInput The problem was that some mails run through the local mailer procmail and arrived all right (local mail), all mail from external (that dropped into my most used mailbox where I use a procmail-filter), did not arrive all right. This made me think it procmail, but these mails came from external and it was sendmail to blame. 20.4 My ISP isn't very interested in installing procmail ...I recently requested my ISP to install procmail, and they responded by saying no. Their main reason was they did not wish to incur the traffic from any/ all of their subscribers setting up mailing lists. [Jon Lewis ] Wouldn't you need write access to either /etc/aliases or /etc/procmailrc to setup mailing lists? Tell the ISP that procmail will greatly improve mail delivery and enable all users to filter out junkmail without ever seeing it. If they still refuse, find a better ISP. 20.5 My ISP has systemwide procmailrc; is this a good idea? [eli] I, for one, do not like my ISPs to put stuff in /etc/procmailrc. There is precious little I will gain from that and plenty of opportunity for them to make mistakes I would not have. At one ISP I know people got upset at some sendmail level filtering of email. One of those upset is a habitual complain-to-spammer-ISP person. He did not want problems seeming to go away if they were really there. Another guy just didn't trust the filtering. Writing a shell script that will give the user a .procmailrc which includercs a system wide shared procmailrc is the best way to do it. This forces the filtering to be "opt-in". 20.6 Procmail changes mailbox and directory permissions By Ed McGuire . Before procmail was used: > -rw-rw---- 1 foo mail 1127 Sep 11 07:33 foo After: > -rw------- 1 foo mail 1517 Sep 11 07:34 foo when the UMASK environment variable is more restrictive than the mode of the mailbox, procmail changes the mode of the mailbox. The default value of UMASK is 077. If you want to preserve the group access to your mailbox, I think you can set UMASK to 007 in the rcfile: UMASK = 007 Further note: the above `UMASK' suggestion in .procmailrc does not work. See comment by Gjermund Sørseth However the permissions on `DEFAULT' are handled before procmail even opens the .procmailrc, so changing the umask there will have no effect on the mailspool. [Scott J. Kramer ] it's documented in the MISCELLANEOUS of the procmail(1) man page: If /var/mail/$LOGNAME already is a valid mailbox, but has got too loose permissions on it, procmail will correct this. To prevent procmail from doing this make sure the u+x bit is set. Otherwise, you might notice a syslog message like: procmail: Enforcing stricter permissions on "/var/mail/sjk" when it chmod's the file to 600. As you've discovered, this is inconsistent with the SYSV (Solaris 2 anyway) default mailbox protection of 660, gid=6 (mail). I think that's an OS-dependent bug, with the `chmod u+x ...' as the workaround. 20.7 Changing mbox permission during compilation to 660 ...it appears that mail that procmail delivers back into the spool it is writing out with owner.group user.mail and rights 600. To me this is reasonable. Mail delivered to the spool by /bin/mail is written out owner user, group mail 660. When procmail delivers mail 600 later attempts at delivery with procmail removed from the .forward file fail: /bin/mail doesn't have permissions (or refuses to uses its permissions). Since we have fickle and unruly users who will be moving their .forwards in and out of place this is a problem. Is the correct solution to force procmail to write 660? If so, how is this done? I assume in the section of config.h just below the warning about only messing with a section if you think you know what you are doing. I don't like feel like I know well enough what I'm doing to walk into that territory without some guidance. [alan] I used to be the manager of the system support in the College of Engineering, at the University of California, Santa Barbara. We supported about 1500 users from two HP 9000 G30's, using one of them as the centralized mailer. Mail was available via NFS exported /usr/spool/mail to over 200 workstations, of all kinds: SGI, HP, Sun, etc. We replaced /bin/mail with procmail as the local mailer (Mlocal) because procmail correctly avoided NFS-locking problems, and it supported user-configurable mail filtering, without compromising system security. In over two years subsequent to the change, we had no loss of mail due to procmail being used as the local mailer. If you wish further comment from the current system managers, send email to "postmaster@eci.ucsb.edu". To answer your specific questions: * you can configure the permissions directly, by changing one of the following defines in config.h: /* bit set on mailboxes when mail arrived */ #define UPDATE_MASK S_IXOTH /* if found set */ #define OVERRIDE_MASK (S_IXUSR|S_ISUID|S_ISGID|S_ISVTX) /* the permissions on the mailbox will be left untouched */ #define INIT_UMASK (S_IRWXG|S_IRWXO) /* == 077 */ #define GROUPW_UMASK (INIT_UMASK&~S_IRWXG) /* == 007 */ We did not find it necessary, however: o We did disable all locking except dot-locking, since the kernel locks were the source of the NFS-locking problems. There have continued to be occasional locking problems, but these are "victim"-induced problems caused by using non-supported and discouraged mailers, such as "mailtool" from older Suns. These locking problems have nothing to do with mail delivery, but from the mail client using kernel-advisory locks, and then orphaning them or, leaving them locked all day long. o An alternative to having users use .forward files, is to create a file of users who would like to use procmail as their local delivery agent, and use this file to initialize a class variable. Write a special rule in sendmail.cf which delivers mail using Mprocmail instead of Mlocal when the destination user is in the special procmail user class. This allows users who want procmail-direct delivery in spite of management worrying. I set this up to test procmail delivery on our system before changing Mlocal to use procmail. We placed some "volunteer" users in the procmail class file, and they never had any problems (I was one of them). 20.8 The .forward file must be real file http://www.math.fu-berlin.de/~guckes/mail/forwarding.html ...I tried to make a softlink to ~/.forward, but then my procmail wouldn't run. When I made a real ~/.forward file, then it worked again. My question is -- why would procmail treat a link to a file any differently than the actual file itself? ln -s ~/.procmail/forward ~/.forward [Werner Reisberger ] That's not a problem with procmail, this is an MTA issue. Due to security reasons sendmail will not deliver mail to files whicharesymlinks. [david] procmail has restrictions on what permissions it will tolerate on an rcfile. For example (I'm just guessing here) it can tell whether it can read the target file but it cannot tell who might be able to write to it. This prevents a major security hole You can make hard link to the file, since A hard link is completely indistinguishable from the original file. But note: a file hard-linked to two or more names is very distinguishable from a file with only one (hard) link, and procmail, for example, will not deliver to a plain folder that has two or more hard links. You can also put the real file at ~/.forward and let ~/.procmail/forward be a symlink to [< mikk0022@maroon.tc.umn.edu>] I suppose, the reasoning behind procmail's folder policy is that procmail locks the file by name, not inode. Hence it cannot guarantee mutual exclusion for access to a file which has multiple names. My understanding of the .forward policy is that a symlink need not share the permissions of its target. Therefore somebody's .forward symlink could have proper permissions, while its target could be writable by others. This would allow anybody with the write permissions to execute any program (potentially) from the user's .forward file. Two hard links share the same permission, so this argument doesn't hold. 20.9 Using .forward if procmail already is LDA [Elie Rosenblum ] If you have a .forward, it is used by sendmail to replace a call to the LDA for the user in question. So if you have a .forward that doesn't call procmail, procmail is ... [david] Elie sent the answer to me with a carbon to the list, but since reading my personal copy my inbox got trashed. As of this writing the list copy hasn't reached me, but the rest of that sentence (as I recall from reading it before it got hosed) was to the effect that procmail is then never invoked at all on your incoming mail; a .forward takes precedence over the LDA. That scenario never occurred to me. Thank you for explaining. [Philip] Scratch the bit about /etc/procmailrcs/$LOGNAME. You're mixing up procmail -d with procmail -m. Ah, got it ... after rereading the man page. The part about /etc/procmailrcs really can apply only when procmail is setuid root, so again it's something I've no experience with and never quite followed or retained. So no file in /etc/procmailrcs is ever used implicitly, but /etc/procmailrc can be. [Philip] $HOME/.forward is handled by sendmail. If you have a .forward, then sendmail rewrites attempts to deliver to you into attempts to deliver to the addresses listed in the .forward file. Or in other words, the .forward takes precedence over the LDA. Thank you both. 20.10 Mail should be put in the mailqueue if write fails ...We want to deliver directly to a user's home directory. But this can of course be temporarily full. Then the mail should _not_ bounce, but instead be put back in the mailqueue and tried again until either it succeeds or sendmail bounces it after 5 days (as usual). The README file says this is my choice (to bounce or not), but I cannot find any place where I can set this. What is the correct place to set this behaviour [1998-06-24 PM-L phil] The -t flag causes procmail to return EX_TEMPFAIL where it normally would have returned EX_CANTCREAT. If you've made procmail the local delivery agent then you should add -t to the A= define, _before_ the -d flag. 20.11 Qmail: how to make it work with procmail [1998-11-10 PM-L John Conover ] All you do is install fastforward and dot-forward, (they are optional, and are not required.) Then cp /var/qmail/boot/proc or /var/qmail/boot/proc+df, to /var/qmail/rc. [1998-11-10 PM-L Greg Boes ] From the qmail FAQ (4.4 How do I use procmail with qmail?) Put | preline procmail into ~/.qmail. You'll have to use a full path for procmail unless procmail in in the system's startup PATH. Note that procmail will try to deliver to /var/spool/mail/$USER by default; to change this, see INSTALL.mbox. if you are trying to get procmail to deliver to maildir format as well, take a look at rhi for patches: http://www.qcc.sk.ca/~bguenter/distrib/procmail-maildir/ 20.12 Qmail: Procmail looks file from /var/spool/mail only ...Procmail seems to want to do something in /var/spool/mail. But since I use qmail, I don't have a /var/spool/mail. Is there a way to have procmail not to create temp stuff there? [philip] Get procmail 3.11pre7 and uncomment and and correct for your local setup the MAILSPOOLHOME="/.mail" define in src/authenticate.c. Compile and install. t's relative to the user's home directory. Thus the name `MAILSPOOLHOME'. [Ekkehard Knopp ] On the www.qmail.org page is a patch that lets procmail 3.11pre7 work with Maildir's, (qmail's NFS safe delivery format), and not must Mailbox's. Very useful. Really slows down delivery though. On my test box, just adding procmail to the delivery where all it did was deliver to the default mailbox, and no other rules whacked my speed test from something like 600,000 messages/day to about 180,000. Killer. I suspect Procmail's locking of the Maildir 8 ways from Sunday is probably partially to blame. 20.14 AFS: How to use Procmail when HOME is in AFS cell ...I've viewed some of the archived posts concerning AFS and procmail, but each seems to have a different perspective on the subject. Besides the fact that AFS isn't the greatest product in the world, does everyone agree that it is not possible to use procmail when your $HOME lies in an AFS cell? Mail sent locally seems to work with procmail, but mail from users w/o a token or AFS id just gets delivered to /var/spool/mail/someone. [Christopher Lindsey 1998-03-09 PM-L] AFS is awesome! You just have to treat it nicely. :) The only viable solution that we've been able to come up with involves patching the procmail-3.11pre7 sources to "fake" user home directories out of another directory. For example, my home directory in AFS is /afs/ncsa.uiuc.edu/.u1/lindsey/ It is kept as such on the mail server in /etc/passwd as well. However, we have some space set up via NFS in /var/forward with space for each individual user (so /var/forward/lindsey in my case). The procmail patch intercepts requests for the user's home directory and replaces it with the "fake" directory (the /var/forward one). So for all practical purposes, procmail things that my home directory is /var/forward/lindsey, and everything works fine. 20.15 Help, some idiot sent my address to 30 mailing lists You can make a procmail recipe to junk incoming mail from the lists until you get the unsubscribe messages delivered to cancel your participation. You should complain to the list's maintainer that such things was even possible: The mailing list should have sent you a confirmation message with unique "participate ID number" that you need to send back in order for the subscription to take in effect. KILL_FILE = $PMSRC/.kill-immediately :0 *$ ? $IS_READABLE $KILL_FILE { KILL = `cat $KILL_FILE` } # 1) Make sure KILL has value # 2) if match is found from header. # 3) /dev/null does not need lockfile :0 * KILL ?? [a-z] *$ $KILL /dev/null [sean] ...In the long haul, your best bet with dealing with this problem is to stamp out the offender - bring this harassment to the attention of their ISP and get their account closed. Repeat as necessary. Most of the mailing lists should have some record of the submission request. Even if forged, the abuser probably has their IP address in the headers somewhere (and if the person is actively subscribing your friend to so many lists and actually WORKING at covering their tracks, apparently you've REALLY crossed them). Most people who stoop to these immature harassment tactics aren't bright enough to fully cover their tracks. Another alternative to having to manually deal with unsubs on certain lists is once you've identified filterable characteristics of the lists, BOUNCE them. Most semi-intelligent listserv implementations will unsub you if they get repeated bounces. Yea, not nice to the listserv maintainer - but then, if perhaps they'd implement a subscription verification system, it wouldn't have been a problem to begin with. :0 * condition { # may expose your .forward - but if you're bouncing lists, # it probably doesn't matter much. EXITCODE = 67 # save header for examination. :0 h: bounce.log } You've got a sticky situation. You can't simply ditch all unrecognized mail - you need to be able to review potential refuse first, and take action on anything which doesn't belong (because you certainly don't want to continue getting the non-wanted lists till the end of eternity - you should want to unsubscribe from them to simplify your mail). 20.16 Help, Procmail beeps and prints to my console ...when messages get filtered through procmail I get a beep and then first 10 lines or so are also sent to the console. I get a lot of messages so the beeps, and stuff on my screen is getting very annoying. [sean] One or the other should do the trick (or both even): Go to your login file (what it is named depends on the shell you're using), and add: biff -n Or/also, in your .procmailrc add: COMSAT = "no" [manual] has information on the COMSAT variable. It also states (contrary to reasoning I gave in above) that COMSAT defaults to 'no' if you specify an rc file on the commandline (otherwise, it is on by default). Doing this latter one should keep procmail from generating COMSAT/BIFF notifications, but would still leave your shell capable of receiving them, say, if you only processed certain mail in procmail manually or somesuch. Personally, I turn biff off AND set the COMSAT off. I read my mail when I read my mail, and I check it often enough (with a POP client at that). 20.17 Help, procmail dumps mail to console ...I have installed sendmail and procmail on my linux machine (latest version of slackware) it works ok, but procmail if run with -d $u dumps all mail after receiving immediately on the console with ---- more ---- I don't like it, a beep is ok, but I do not want all the garbage on my screen. Is there a way to tell procmail that I just want the mail in my mailbox (/var/spool/mail/$u) ? Thanks for the help! [Xavier Beaudouin ] Check your /etc/inetd.conf for a in.comstat, add a '#' at the beginning of the line, save the file and killall -HUP inetd. This should stop this ;-) 20.18 Help, corrupted From_ line in mailbox [Jeffrey S. Gilton 1998-02-11 in procmail mailing list " Solved the FFrom problem"] Thanks to everyone who responded to my questions about a problem where the From line was getting corrupted. Here I tell what was the real problem. To recap, when our Caldera OpenLinux 1.1 system received multiple email messages very quickly, some messages would get multiple F's on the from line and then subsequent messages would be missing the F's. Most responses said that it sounded like a file locking problem. Suggested solutions were to get the latest version of procmail or recompile our version so that it would look at the file locking mechanisms. The funny thing was that three systems with new installs didn't exhibit the problem. The file locking recommendation eventually led to the real problem. On a good system I would run our spam script (we spammed ourselves to trigger the problem) and everything would work. Using top I would see multiple instances of procmail running. Looking at the directory where the spool files were, I would see a spool_file.lock file get created and then go away. Finally, I did the exact same thing on the system that wouldn't work. There I would see the multiple instances of procmail running but no lock file being created. I said to myself "Now that I know what is happening, the question is why." It turned out to be a permission problem on the spool directory. On the system that worked, the permissions were rwxrwxr-x with the owner being root and the group being mail. On the system that didn't work, the permissions were rwxr-xr-x with the owner and group being root. This meant that procmail, which is run as mail couldn't write the directory file. We changed the broken system to rwxrwxr-x with owner root and group mail. The problem disappeared. As I said, the suggestions about lock files were key. It guided our investigation until we found the real problem. I thank everyone who responded. I've seen other posting about corruption of the From line. Perhaps you have the same problem. [Christopher B. Smith ] I had the exact same problem with my upgraded OpenLinux system. For the record, if you are running the imapd that comes with it, you should really set your permissions for the directory is as follows: chmod 1777 /var/mail/spool I got that feedback from the guy who wrote imapd, and it works very well. 20.19 Directing user's mail to HOME instead of /var/spool/ ...I have a need to direct all a single user's mail to a mailbox in his home directory, to $HOME/mailbox, # One possible solution, not perfect UHOME = /tmp_mnt/users UHOME_LIST = "(login1|login2|login3)" *$ ^TO\/$UHOME_LIST@ * MATCH ?? ()\/[^@]+ $UHOME/$MATCH [era] Perhaps preferably use ^TO_ if you have Procmail 3.11pre7 or newer. This is the classical case of using Procmail where you really need the envelope recipient information. The headers are +not+ enough to determine who a message is for. If Procmail is your MDA, you can have this, but I'd still think something involving Sendmail would be more appropriate. For one thing, what if this user would suddenly really want to use Procmail? You can set `DEFAULT' and `ORGMAIL' for this one user in `/etc/procmailrc' to come around that, but the bottom line, as so many times before, is that Procmail might not be the right tool for this. 20.20 NFS mounting /var/mail is a good way to get bad performance > /var/mail stays at a Solaris 2.5 machine. Cucipop is working > at the same machine. It's fine there. But, I want to have > more than one machine with cucipop and when I put cucipop at > another machines, NFS clients, it is delaying more 30 or 40 > seconds to close the session. [1998-06-23 PM-L Brad Knowles ] NFS mounting /var/mail is a good way to get bad performance, especially when you're doing any NFS writes. Even if you're not doing any NFS writes, just having to deal with local file locking and trying to translate that into NFS file locking is a nightmare (in general, file locking is one of the single biggest problems left with NFS). > Procmail is working good on NFS, it finishes quickly. But when > cucipop is put on a NFS client, procmails starts to delay too. Procmail probably isn't writing to NFS, or if it is, it's probably not using the same locking mechanism as cucipop. Unfortunately, each vendor and each program have their own ideas on how to best do that. [philip] cucipop was written by the author of procmail. Ideally, when you compile cucipop you edit its config.h to use the locking techniques that procmail's autoconf process determined for your system(s). However, even if you didn't do that, cucipop uses the same dotlocking algorithm as procmail. Also, keep in mind that any POP3 server will have to copy the mailbox in order to work on it, and many of them copy the mailbox to /var/mail/.username (you got it -- creating lots of NFS writes). When they're done, they copy the mailbox back to /var/mail/username (after they copy any new mail messages that have come in to the end of /var/mail/.username and locked then truncated the original /var/mail/username file). [philip] cucipop doesn't use a temporary file: it keeps it all in memory. On deletes it updates the mailspool in place which should never _lose_ data, though if the server crashes in the middle of this you can end up with one or more bogus messages. This is a *real* nightmare when you start talking about users who select "Leave mail on server" and have multi-megabyte mailboxes. [philip] Assuming you have enough memory, cucipop should be pretty fast. I think maybe now you're starting to understand why POP3 really doesn't scale well at all in multi-machine environments (unless you've cooked up a custom mail store that uses a real database back-end, like Oracle Parallel Server), with /bin/mail (or procmail) as a writable interface to this message store and POP3 and/or IMAP as a readable (and writable) interface to this same message store. Then you can let the database vendors deal with the hard data replication and distribution problems. Otherwise, it's a pain-in-the-ass. > Is there another good pop server? Have you tried QPopper from Qualcomm? It's the single best POP3 server I've ever run across, although I wouldn't put even it in an NFS write environment. BTW, I used to be the Mail Systems Administrator for GNN (Global Network Navigator), the web site/National ISP co-operative between O'Reilly & Assoc. and AOL. At our peak, we had hundreds of thousands of registered users, of which up to five to six thousand were logged in at any one time, with their MUA set to check their mail every minute. We had a single primary Mail/POP3 server machine (Dec Alpha 2100 w/ four 250Mhz processors, 4GB RAM, 28GB hardware mirrored/striped mail spool), and one warm spare (same CPU/RAM configuration, physically hooked up to the same disks, but through DECsafe ASE not mounting them unless the primary died). 20.21 I can't see the sendmail's response in LOGFILE ...As the man page says, this should've written to my LOGFILE. It didn't. But it DID activate the pipe in the recipe. So what's up here? :0 hc *$ ? $IS_EXIST $HOME/.vacation | LOG=| ($FORMAIL -r; echo $IM_NOT_HERE) | $SENDMAIL -t [david] The man page says that a variable capture recipe assigns the standard output of the command to the variable. Since you are repiping the output of formail and echo to sendmail, sendmail sucks up the standard output of formail and sendmail. Sendmail itself does not write to standard output, so the stdout of ( $FORMAIL -r ; echo $IM_NOT_HERE ) | $SENDMAIL -t is nothing. Thus you're assigning a null string to $LOG, and when procmail writes $LOG to the logfile you can't see a difference. 20.22 Compiling procmail and choosing locking scheme General advice: Everything except dot locking is usually broken. [stephen, <199607292139.XAA12433@hera.cuci.nl>]. Remove fcntl() and lockf(), only allow flock() (or omit it completely) Kernel locks don't work. But that's all some programs use. Across a networked filesystem, lockf() doesn't work, fcntl() and flock() should, but they don't either because the lockd is buggy. Mailtool uses fcntl() but does it wrong, so that's another problem. The only thing that works on all platforms, all networks, all the time are .lock files. Makefile refers to: # Uncomment (and change) if you think you know #LOCKINGTEST=100 # it better than the autoconf lockingtests. # This will cause the lockingtests to be hotwired. # 100 to enable fcntl() # 010 to enable lockf() # 001 to enable flock() # Or them together to get the desired combination. config.h refers to: /*#define NO_fcntl_LOCK uncomment any of these three if you */ /*#define NO_lockf_LOCK definitely do not want procmail to make */ /*#define NO_flock_LOCK use of those kernel-locking methods */ 20.23 Forwarding lot of mail causes heavy load ...There are several forward (e.g. ! walter@localhost) recipes For every forwarded mail, a distinct sendmail process is created. This leads to a heavy (IMHO unbearable) system load. How can I stop procmail from running a sendmail process for every mail forwarded? SUMMARY: Look at qmail, it's better than sendmail. [era 1998-08-15 PM-L] (Blows dust off old underutilized Bat Book/ORA sendmail book) Yeah, setting QueueFactor (q) and QueueLA (x) to suitable values should do what you want. You need to have load-balancing support compiled in, though; according to the Bat Book, sendmail -d3.1 tells whether you have it or not. (Mine just says getla:0 which I would imagine means I have the support but the load average was below the cutoff level. AFAIK using load averaging would have the first messages delivered and the rest queued. However, also not being a sendmail guru, I do not know how to empty a sendmail queue for incoming mail only. Moreover, even if I knew how to do this, it would have to be done after procmail finishes. [Liviu Daia ] Instruct sendmail to queue messages when called from procmail: SENDMAILFLAGS="-oi -od d" then disable the normal sendmail daemon from your system init scripts, and run it in flush queue mode only, that is, replace /usr/sbin/sendmail -bd -q 15m in your init scripts with /usr/sbin/sendmail -q 15m ("15m" is how often the queue will be run (15 minutes). Change it to whatever is appropriate for your purposes). Also make sure to disable forking in your sendmail.cf. The downside of this approach is that it will also delay the delivery of local messages. Different approach: pipe messages to sendmail instead of using '!' and use the wait flag. Something along the lines of: :0 w * conditions | $SENDMAIL $SENDMAILFLAGS Well, I'm actually not sure you can use the 'w' flag without 'f' (the manual doesn't say it, and I'm not too familiar with procmail internals), so if that doesn't work you might also try Sendmail will rewrite the `From_' header (which you can probably safely ignore), and it will (optionally) add a `From:' if one doesn't exist, but it won't touch an _existing_ `From:'. Well, actually it will encode or decode any 8-bit characters in the `From:' according to the options in sendmail.cf, but it won't change the _meaning_ of the "From:". In fact, that's exactly what procmail does too in the '!' recipes. :0 fw * conditions | $SENDMAIL $SENDMAILFLAGS # dummy recipe to stop procmail from delivering an empty message :0 a /dev/null 20.24 What happens to mail if MDA Procmail fails ...When procmail is the local mailing agent distributing e-mail to a user's $HOME and the target machine is 'down', where does the e-mail go? I was given the impression that the mail would be collected on the 'mailhub' in /usr/mail/BOGUS.xxx (Solaris system). It is not happening and we have the potential of losing mail. [philip] I assume that by "target machine" you mean the NFS server for the given user's account. Procmail's attempt to read ~/.procmailrc will timeout, then when it tries to write to $DEFAULT (which you say is in their home directory) it'll time out (again) and return EX_CANTCREAT to sendmail. Sendmail will then presumably bounce the message. Now, if sendmail is looking for .forward files in user home directories, then procmail will never be called, as sendmail will try to open the .forward file and consider it a transient error when it times out, causing the message to be queued for a later delivery attempt. (Note: invoking procmail with the -t flag causes it to return EX_TEMPFAIL instead of EX_CANTCREAT. This would cause the message to be requeued. However, this is not generally recommended.) 20.25 Procmail reads entire 90Mb message into memory ...last week my workstation ground to a halt when procmail received a 90Mb Email message (ran out of memory). The point is, such message sizes are fine by me, as long as the system can handle it. Is there any way I could make procmail only read the headers of that message before scanning /etc/procmailrc/ ~/.procmailrc and acting on it? That way it wouldn't need to read the entire message into memory. ...Recently, I modified the sendmail.cf file to pipe messages through procmail before sending them to deliver, so that I can use system-wide procmail recipes for spam filtering. However, yesterday we had a client send a 22 megabyte e-mail message (on purpose, no less) and the system just came to its knees trying to deliver it to the user's mailbox. [philip] Btw, All the versions of /bin/mail (or mail.local) that I've seen the source for either read the entire message into memory first or use a temp file. Depending on where temp files are located, a 90MB temp file may be just as bad as holding it in memory. And, No, there isn't. Hacking it in would not be non-trivial, mainly because the current code runs with the assumption that the entire message is there, and determining when it actually needs to see the entire body (to do demand loading) would not be easy. Remember that a condition on the size of the message, ala :0 * > 10000000 /dev/null would require the body to be read... It really is just better to simply have sendmail enforce the limit. You should be doing it there anyway to cut down on the totally trivial denial-of-service attacks and because it's more efficient. ...I am running procmail ver 3.11pre7 and I keep getting "out of memory as i tried to allocate 8xxxxxx bytes.". I have over 100 meg available swap space so i have a difficult time understanding this. Is this a known error? Procmail's memory allocation technique appears to non-optimal for some OS/libc combos, namely implementation of the libc system function realloc() (FreeBSD has been reported). It's conceivable that the configuration process could be enhanced to detect this system limitation to use a strategy more efficient on them. Don't hold your breath. [ed] There is a patch available that should fix the problem for you. See the messages at . 20.26 Help, procmail uses occasionally huge chunk of memory ...we've noticed that occasionally, procmail uses a huge chunk of memory. It's always the same 17MB as reported by the top command. Can anyone enlighten me as to why sometimes procmail creates such a huge footprint and other times doesn't, for the same user with an unchanged .procmailrc file? [ed] Is your operating system a BSD variant such as FreeBSD or OpenBSD? If so, then the problem is due to a poor implementation of the Standard C Library system function realloc() on those platforms. A patch that works around this is available. See the messages at Specifically, the patch is located at . It's an artifact of procmail's memory management. It reads an entire message into memory before working on it. Fear the system with procmail as the local delivery agent, where people are slagging 100M CAD files around. :-) 20.27 Procmail signalled out of memory in my verbose log ...I notice in my procmail verbose log the following 'transaction': procmail: [10239] Sat Jan 9 08:49:02 1999 procmail: Out of memory buffer 0: "formail" buffer 1: " formail -A "X-Check: List"" Folder: **Bounced** 5744 procmail: Notified comsat: "bhoule@:**Bounced**" If I act quick enough when this happens, I can look in spool/mqueue and find a message with a gazillion addresses in the To: line. So it seems that formail is having trouble adding my X-Check header to an already large set of headers. [philip] No, it's procmail that's unable to allocate enough memory. The buffer dumps indicate that procmail was unable to get enough memory somewhere between parsing the action line and reaching the next recipe -- buffer 0 would not contain the string "formail" if procmail had gotten to another recipe or variable assignment. What's weird is that the message is so small (only 5744 bytes according to procmail). Do you only see this error on this recipe, or at random places in your .procmailrc? If the later, then I would guess that your mailserver is running out of memory for some other reason and that procmail happens to be an innocent bystander. If the former, then, well, I'm not sure. The message is never delivered to me. Is there anything I can do so that procmail/formail will act as if it was never there so the incoming dumps into my inbox rather than returning an error to the mailer? This "**Bounced**" business is not a very helpful action. Giving procmail the -t flag will cause fatal internal errors that are normally returned as permanent errors to be returned as temporary failures instead. Otherwise there's no way to control that. (Setting EXITCODE won't work because procmail needs to malloc memory to handle TRAP and EXITCODE, and it'll refuse to try that when it was malloc that caused the exit.) 20.28 Variables DEFAULT and ORGMAIL ...According to the man pages, `DEFAULT' is defined as `ORGMAIL' ...so if I redefine ORGMAIL, then `DEFAULT' should change as well, which doesn't help me. Any help on this would be appreciated [david] `DEFAULT' is initially defined as equal to `ORGMAIL'. Once procmail has started reading /etc/procmailrc (if it is the MDA) or your .procmailrc, you can change the value of either without affecting the other. In fact, you can even set DEFAULT on the command line when you invoke procmail (I'm not sure about doing that with `ORGMAIL', though), and that value will override its normal initial value equal to `ORGMAIL'. What if it is possible that dropping to DEFAULT fails due to disk full? Then you would better have another drop place in another file system. Peek at bdf(1) or df(1) to find out the different mounted file systems. # Place this to the end of your .procmailrc and define # DEFAULT_SECONDARY :0 : $DEFAULT :0 E $DEFAULT_SECONDARY If you deliver explicitly to $DEFAULT, procmail treats it like any other save-to-folder recipe, and if the write fails, it continues reading recipes. ...If I had set the "deliver" destination as `ORGMAIL' rather than `DEFAULT,' would it have made any difference? Nope. If you write a recipe for it, procmail just expands the variable and doesn't give a heck if it happens to be the same destination as `DEFAULT' or `ORGMAIL'. `DEFAULT' is special to procmail only when it uses it on its own after falling off the end of the rcfile; `ORGMAIL' is special only at startup (without -m) and when procmail falls off the end of the rcfile and finds that it cannot save the message to `DEFAULT'. In general, if procmail falls off the end of the rcfile, fails to save to `DEFAULT', and then fails to save to `ORGMAIL', does it revert to the compiled-in value of `ORGMAIL' ? [philip] Procmail has no fallback beyond the current value of `ORGMAIL'. If delivery to both `DEFAULT' and `ORGMAIL' fail, then procmail gives up and exits with error code 73 (EX_CANTCREAT) or 75 (EX_TEMPFAIL), depending on whether the -t flag was given. Setting `EXITCODE' would probably override those. The message is logged as "*Bounced*". 20.29 When DEFAULT cannot be mailed to If procmail gets to the end of the rcfile without delivery (or without being directed to another rcfile by an INCLUDERC or HOST assignment), it assumes these: :0: $DEFAULT :0 e: $ORGMAIL That is, it tries to deliver to $DEFAULT and if it can't, it tries $ORGMAIL. If that fails too ("deep, deep trouble" as Stephen says in the man page), it exits without delivery and reports failure to the MTA, which, depending on other factors, will either requeue the letter and try delivering later or will bounce it to the sender. 20.30 Variable DROPPRIVS ...I have procmail invoked from a mailtable for a virtual domain. Presently that runs as root, inherited from sendmail. I'd like to have it run less privileged. I tried chown'ing the rc file to the user I want used and setting "DROPPRIVS=yes". That didn't do it. So I added "LOGNAME=user" and "USER=$LOGNAME" before the DROPPRIVS assignment and that didn't work. [philip] DROPPRIVS only has an effect inside the /etc/procmailrc used when procmail is running in delivery mode (-d), not when it's running in mailfilter mode (-m). USER and LOGNAME have no effect on the working of DROPPRIVS, as procmail is just going to change to the uid/gid of the user specified on the command line after the -d. Your mailtable entry should be specifying the procmail mailer, which runs procmail in mailfilter mode. If the following are true: o procmail is running in mailfilter mode o no assignments were given on the command line o the -p flag was not specified o the rcfile specified is located under /etc/procmailrcs/ without backwards references ("/../"s) o the rcfile is not a directory (duh!) then procmail will assume the uid and gid of the owner of the rcfile. If the rcfile is actually a symlink, the procmail will assume the uid and gid of the link itself, not the underlying file. If your OS allows anyone to give away ownership of files with chown, the procmail adds the following restriction to those above: /etc/procmailrcs must be owned by root and mode 700. 20.31 Variable HOME [david] Since procmail doesn't understand tilde, you have to use variable HOME instead. CONTENT = `cat ~/file.txt` # Won't work CONTENT = `cat $HOME/file.txt` # ok But accessing other user's home is another story. You could change the SHELL temporarily to get procmail understand the reference, like this: SHELL = /bin/csh CONTENT = `cat ~user/file.txt` SHELL = /bin/sh # restore original setting Because the tilde is in $SHELLMETAS, when procmail sees a tilde, it will invoke a shell. It's better to skip the extra process of a shell and use the $HOME variable: put a symlink somewhere under your own home directory that points to the other user's file so that you can use the $HOME variable in your .procmailrc and avoid the shell invocation. However, there are dangers on this too, because sysadm may move home directories and your symlinks may be out of date. If you expect such changes and broken links, then you could cache the needed home directories at time you need them: HOME_PHIL = `ksh -c "echo ~phil"` HOME_ED = `ksh -c "echo ~ed"` 20.32 Variable HOST [philip] If a assignment to the "HOST" variable occurs where the assigned value doesn't equal the hostname of the machine on which procmail is running, procmail will stop reading the procmailrc, and if there are other procmailrcs specified on the command line, it will start reading them. [david] It goes back to the early days of procmail, before Stephen thought of INCLUDERC or the "var ?? condition" syntax. When people had to use different code based on which local host machine was processing a particular message, the method was to list a number of rcfiles on procmail's command line. The first one would start out with general code for all messages and all hosts and then have a HOST = some.specific.machine assignment, followed by code for mail delivered on that machine. If the first nine characters of "some.specific.machine" matched the real value of $HOST, procmail would stay in that rcfile; on a mismatch, it would jump to the second rcfile named on the command line. The second rcfile would probably be for another particular machine, so (unless it first had some universal code for all machines except the first one, or unless there were only two machines where procmail might run) right at the top it would have HOST = this.specific.machine Again, a match for the first nine characters would keep procmail reading this rcfile, but a mismatch would make it jump to the next rcfile. And so it went. An incorrect HOST assignment (note that "HOST" alone attempts to unset the variable, so it is *always* an incorrect assignment) in the last rcfile on the command line made procmail drop the message and exit. Since we almost never name more than one rcfile on the command line now, attempting to unset HOST in .procmailrc will have that effect. I would guess that the only use of this original setup still around is in SmartList, where flist invokes procmail with a number of rcfiles on the command line and uses things like HOST=go.to.the.next.rcfile.now to move from one to the next. Also, procmail's -m facility (which didn't exist back then) is incompatible with using HOST to jump among rcfiles, because it requires naming exactly one rcfile on the command line. Nowadays we can do something like this to use different rcfiles on different hosts: :0 * HOST ?? ^^\/[^.]+ { INCLUDERC = $HOME/.$MATCH.rc } 20.33 Variable LINEBUF ...[manual] Length of the internal line buffers, cannot be set smaller than 128. All lines read from the rcfile should not exceed $LINEBUF characters before and after expansion. If not specified, it defaults to 2048. This limit, of course, does not apply to the mail itself... _Note:_ Beware of simply setting LINEBUF to a huge value: such an assignment causes procmail to immeadiately allocate twice that much memory (procmail has two buffer internally of size $LINEBUF). [philip] Those 160 lines of condition are almost certainly overflowing LINEBUF. You should either a) use one of the innumerable recipes sent to the list demonstrating the use of fgrep; b) break it into multiple recipes; or c) increase LINEBUF. If you modify this list of domains regularly, then you should strongly consider (a), as (b) and (c) just put off it happening again. `LINEBUF' only applies to lines from procmailrcs. You generally only have to worry about `LINEBUF' when you have a variable expansion or command expansion (backquotes) that doesn't have an obvious and reasonable bound on its size. procmail will avoid overrunning its `LINEBUF' length buffer when doing command expansions by ignoring the extra output, so you're safe there, as long as data truncation is fine. Variable expansion isn't checked like that, so you can cause procmail to coredump by doing something like: :0 * ^Subject: \/.* |some-program $MATCH then feeding procmail a message with a huge Subject: header field: since no shell meta characters appear in the action, the action line will be expanded and exec()ed by procmail directly instead of by the shell. On the other hand, the following is fine: :0 * ^Subject: \/.* |some-program $MATCH ; ; The semicolon forces a shell invocation, and the shell should be safe. If your /bin/sh can buffer overrun on variable expansion, then you're in more trouble than you know. Action lines aren't the only place to watch your variable expansions. Variable assignments and condition lines that have a leading dollar sign also undergo expansion. For example, this isn't safe: SUBJECT = `$FORMAIL -x Subject:` NEWSUBJ = "Subject: $SUBJECT" procmail won't buffer overrun in the first line, but a really long subject could cause the second to do so. The following should be safe: NEWSUBJ = "Subject: `$FORMAIL -x Subject:`" but even then only if you're sure the shell is doing the expansion of NEWSUBJ. Note that matching against the value of a variable (using the "var ??" condition special) is safe no matter what the size of the contents of the variable. The problem is when you interpolate the variable into something else. Is there any easy way to know default LINEBUF value for specific procmail? I'm sure there's a much easier way, but this will work: # Mitsuru Furukawa # $OUT = $HOME/tmp/linebuf.lst :0 wc: $OUT$LOCKEXT *$ ! ? $IS_EXIST $OUT | echo "$LINEBUF" > $OUT [philip] If you examine the procmailrc manpage, you'll note that it lists fourteen variables (among them DEFAULT but not LINEBUF) whose values are reset in the environment by procmail, plus some additional ones like IFS, ENV, PWD, and PATH which come out of the top of config.h. Following this is a list of all of procmail's magic variables, including those fourteen. The idea is that while procmail has thirty magic variables, only fourteen of them are put into the environment by procmail. The others may have default values, but they're 'input only': if what you're doing depends on one of the others having a certain value, then you should just go ahead and set it to that value. I know of only two ways to find out what value procmail is using by default: a) check the manpage (the manpages should show the correct default for the machine), or b) fire up your favourite debugger and hope that no one stripped the procmail binary. There will be no error message when Procmail dumps core, even though the reason is apparently precisely that `LINEBUF' is being exceeded too much. Is there a limit on the length of a single line [david] Yes, both before and after variable expansion and command substitution, it must be shorter than `LINEBUF' characters. The exceptions are (1) comments and (2) commands that are run by a shell rather than directly by procmail. The entire condition must be under `LINEBUF' characters Unfortunately, LINEBUF seems to be a write-only variable; you can change its value but you can't find out its current setting. 20.34 Variable LOG and LOGFILE If you want to print something to the `LOGFILE', you could do it like this LOG = " This message goes to LOGFILE" LOG = " $NL$NL And this has linefeeds around $NL$NL" Or like this, which proves to have some nice feature in respect to `VERBOSE' setting: dummy = " This message goes to LOGFILE" dummy = " $NL$NL And this has linefeeds around $NL$NL" You see, if you set `VERBOSE="off"' Then the `dummy' lines are not printed and recorded to the `LOGFILE'. `LOG' messages are aways printed, and that's not very nice if you're trying to suppress messages while you call some subroutine: saved = $VERBOSE VERBOSE = "off" # Hope this subroutine does not use LOG # Eg. $PMSRC/pm-jaaddr.rc INCLUDERC = $RC_ADDR VERBOSE = $saved # restore original value 20.35 Variable TRAP Here is one example how to write to the logfile, Be sure that you have preset all the variables, this just demonstrated the usage of `TRAP'. Pay attention to right use of single and double quotes if you pass the values to the shell. Like in this example where the `/dev/' is removed from the `FOLDER' variable's value. TRAP = 'echo " FROM $FROM TO/CC $TO / $CC SUBJECT $SUBJECT FOLDER $LASTFOLDER " | sed -e "s#FOLDER /dev/#FOLDER #g"' And if your MUA expects the file to be touched before it sees new incoming mail, here is recipe by [david]: TRAP = 'touch -m $HOME/Mail/$LASTFOLDER' # with strong quotes Place it early in your rcfile; then each recipe that saves to a directory can look simply like this, and the trap will take care of the touching: :0 flags # no local lockfile needed for save to directory * conditions directoryname/. [david] Procmail terminates when it exits ... after final delivery of the message. It doesn't terminate (nor execute TRAP) after delivering a copy to a `c' recipe [however, a clone does execute TRAP when it terminates, unless you unset TRAP for it]. It doesn't execute the trap after a variable assignment, a variable capture recipe, a filtering recipe, nor any other non-delivering action. On the other hand, it *does* execute the trap if you do a quick bail-out by unsetting or missetting $HOST. [Recipe to record Subject lines on exit] <> [david] ...this will list all subject lines in the logfile upon exit if there are two or more. The earliest would appear twice: once in the trap output and once in the logabstract. :0 * ^Subject:.*$(.+$)*Subject: { # If there is already `TRAP' set, combine the # old trap recipe with this TRAP = "${TRAP:+$TRAP ; }$FORMAIL -XSubject:" } 20.36 Variable UMASK There is a better way to find out which folders contain new mails if you are using procmail to filter the mails. (This was a hack by one of my friends) procmail allows you to set UMASK on the folders. So before doing anything, set UMASK to 076, which means the perms will be -rwx-----x to any folder which receives mails. now using `find' -perm -001, you can print the folders which have new mails. the shell script which does this will also have to chmod o-x on all these folders. ...How does this work? AFAIK umask only applies to new files created and not to appending to existing files which is what procmail essentially does, right? [era] Procmail does interpret UMASK this way, so this works, but I don't think it's a particularly good solution. It's actually hinted at in the documentation for UMASK in procmailrc(5). `find' is a rather heavy program to start up every time you want to look for mail. (Haven't done any timings, though.) o I just grep -c '^From ' on my mail folders to see how many messages there are in them. (This is only an approximation, in the case where one or more messages contain unescaped From_ lines.) o For a really pedestrian solution, keep all your spool files in their own directory (I think this is a good idea for other reasons as well) and do an ls -lrt on that directory, possibly piped into a sed script to trim off files with timestamps older than, say, 24 hours. o If your mail reader will reset permissions on spool files when it gets mail from them, the UMASK trick is a good base for a mail checking script, but I would then only ls -l the spool files and look for files with an x01 permission. 20.37 UMASK and permissions My mail folder says -rw-r--r-x, Is there a bug in Procmail's umask handling? (see last x bit) [philip] That's a feature, not a bug! To quote the procmailrc(5) manpage: _UMASK_: The name says it all (if it doesn't, then forget about this one :-). Anything assigned to UMASK is taken as an octal number. If not specified, the umask defaults to 077. If the umask permits o+x, all the mailboxes procmail delivers to directly will receive an o+x mode change. This can be used to check if new mail arrived. Anyhow, normally, under Unix, the create system call will set default permissions of 666 and the umask can only be used to mask off the bits you don't want (and not to e.g. add x bits). Shouldn't Procmail work this way, too, just to be consistent with the rest of the system? creat() will set the permissions to whatever you want it to, modulus the umask. If the umask is zero, you can set the permissions to 7777, though that would be kind of stupid (and actually, most versions of UNIX won't let you set both the sticky bit and an executable bit unless you're root, for historical reasons). Most programs that call creat() or open(..,O_CREAT,...) give a mode argument of 0666, as they generally don't write out executables. Procmail just happens to call open() with a mode argument of 0667, to be modified by your umask. 20.38 Performance difference between backtick and "|" recipe Procmail sends the whole message to stdin whenever it sees backticks used. And if you use recipe, you can add the `h' flag to feed only the header to the program, and not the whole message. Let's ask academic question: Which one of the choices below is efficient? # Side effect: Do something with shell dummy = `echo hi there > some-file.txt` :0 hwic | echo "hi there" > some-file.txt Procmail sends whole message to first line and only headers to second recipe. Answer: It doesn't matter. Either way procmail will make one write system call which will return 0 [bytes written] and off it goes. You should use the first one, because the latter affects the `A' and `E' flags later, first one is more clear overall. While someone suggested following, it was rejected because it hurts performance more [stephen]. The cat process is useless and directing to dev null does not buy anything. :0 hwic | cat - /dev/null; echo "hi there" > some-file.txt 20.39 Procmail's temporary file names while writing file out ...Any ideas what might make those .nfs* files? They contain messages which seem to have been successfully processed by procmail in the later parts of the .procmailrc . However, I doubt they'd ever get cleaned up if I didn't discover them. /disk3/home/foobar/Mail 119) ls -la backup total 22 drwx------ 2 stanr 512 Nov 11 21:00 . drwx------ 3 stanr 2560 Nov 11 21:11 .. -rw------- 1 stanr 3063 Nov 4 03:31 .nfsA0c724.4 -rw------- 1 stanr 1780 Nov 3 23:00 .nfsA47da4.4 -rw------- 1 stanr 849 Nov 3 23:22 .nfsA481f4.4 -rw------- 1 stanr 2293 Nov 11 11:28 .nfsA737d4.4 -rw------- 1 stanr 2598 Nov 11 20:39 msg.HCJB -rw------- 1 stanr 3127 Nov 11 21:00 msg.ICJB -rw------- 1 stanr 1884 Nov 11 20:45 msg.KCJB /disk3/home/stanr/Mail 120) [david] procmail uses temporary name while it is trying to write a file out, which it renames if things go well. I noticed that they all came from a 4h 31 span overnight; perhaps there was some systems work being done on your machine that screwed things up? :0 ic | cd backup && rm -f dummy `ls -t msg.* .nfs* | sed -e 1,3d` [aaron] When a file that is being used by a program on an NFS client gets unlinked the NFS server renames it to something like that. It should then actually get unlinked when the file is closed, but it looks like the NFS server never got the close message for those. [Keith Pyle ] It is a result of using NFS, but the fault lies with the operating system on the NFS client. Keep in mind that NFS is stateless from the perspective of the NFS server. It keeps no information on how any file is being used. So, if a client tells the server to delete the file, the server deletes the file. This is not normally a problem, but many programs use a "trick" of Unix where the program opens a file, unlinks (deletes) it, and then continues to use the file. For all local files, the Unix kernel will not actually delete the file until all processes which have the file open exit. This works very well for temporary files. If a client tells an NFS server to delete a file, it will delete the file immediately because of the stateless nature of NFS. The server has no way of knowing if any client still has the file open. To avoid this problem, if a client unlinks an open file on an NFS filesystem, the file is renamed to .nfs* where * is a unique value. The NFS client system is supposed to delete the .nfs* file when the process exits. However, there are some versions of Unix which do not do this well (e.g., AIX). If one of these OS's is used, it is common to find .nfs* files in various places. Therefore, it is a good idea for system administrators to periodically purge any .nfs* files over a certain age to eliminate the unsightly buildup in the filesystems. 20.40 Parameter $@ [david] Of version 3.11pre7 procmail does not grok "$*", nor does it grok "$@" outside a pipe or forward action. The only way to get the positional parameters all quoted together into "$*" is something like this: This doesn't work after all ARGS = `echo "$@"` Procmail substitutes null for "$@" there. *This* works, though: :0 ir ARGS=|echo "$@" After that you use "$ARGS" instead of "$*". If you try to set ARGS with ARGS="$@", procmail doesn't substitute for "$@" and makes $ARGS null. If you try ARGS="$*" you get the literal text '$*'. [philip] Of course, $ARGS differs greatly from $@ in that $ARGS will either be split on whitespace (if unquoted) or one argument (if double-quoted). $@ has the cool property that if double quoted it'll still be split into multiple arguments on the original argument boundaries. Since full-blown email addresses often have spaces, this distinction should not be casually dismissed. Note that while you might not type in such an addresses, your MUA's reply builder may. 20.41 Procmail variables are null terminated (detecting null string) You can't catch null in the message. Eg if you try like this NUL=`/usr/5bin/echo "\000"` :0 HB * $ $\NUL { LOG = "Caught NUL" } [philip] It won't work as expected. The problem is that environment variables (and therefore procmail variables) are null-terminated, and therefore cannot contain a null. The above line creates an empty variable. The solution is to use an inverted character class: NUL = `/usr/5bin/echo '[^\001-\377]'` Note that procmail handles 8-bit characters except for null in procmailrcs, so you can use a literal control-A and octal-377 in your .procmailrc and save an echo and shell invocation right there. 20.42 FROM_DAEMON TO and TO_ and case-sensitiveness [david] ^TO is case-insensitive by default. Stephen once told me something to the effect that tokens like ^TO, ^TO_, ^FROM_DAEMON, and ^FROM_MAILER are *always* case-insensitive, even if the recipe has the `D' flag, but I'm not positive that that was what he was saying, and we never pursued it. Certainly they are insensitive to case if there is no `D'. [philip] If a regexp contains the ^FROM_DAEMON token, then that entire regexp is treated as case-insensitive. Other conditions in the recipe are not affected by this. The other tokens have no effect on the case-sensitivity. (This is with procmail 3.11pre4) 20.43 TO_ macro deciphered ...What is the essential difference between TO and TO_ ? [phil 1996-03-21] The difference is that ^TOalias1@site may match something like bobs-alias1@site while ^TO_ won't. [elijah 1997-09-16] Let's rewrite that in perl /x format. See below. The definition of the word boundary in block (E). See below. The ^TO_ expansion was added in v3.11pre4. You'll probably have to just ^TO (no '_'), which should work almost as well. / # [begin regexp] ( # [Block (A)] ^ # Anchor to start of line ( # [Block (B)] (Original-)? # Optionally proceed (C) with "Original-" (Resent-)? # Optionally proceed (C) with "Resent-" ( # [Block (C)] To # "To" |Cc # or "Cc" |Bcc # or "Bcc" {very rare in practice} ) # [end (C)] | ( # [Block (D)] X-Envelope # Proceed line 17 with "X-Envelope" |Apparently # or "Apparently" (-Resent)? # with optional "-Resent" appended ) # [end (D)] -To # "-To" [line 14] ) # [end (B)] : # ":" ( # [Block (E)] .* # any text # any single char other than letters, numbers, [^-a-zA-Z0-9_.] # hyphen (-), underscore (_), or period (.) ) # [end (E)] ? # Block (E) is optional ) # [end (A)] /x # [end regexp] 20.44 TO_ macro and RFC 822 ...According to RFC822 the From address can contains almost anything and the valid email address can be extracted from the line as long as it is enclosed between <...>. Like . [by Vikas Agnihotri ] Block (E){see TO_ macro explanation} is there to slurp up that part. The is not needed, and a case such as: From: "jester@fun.house" Will confuse a test for "^TO_jester@". Yes, I have seen people do that stuff, apparently not even maliciously. And although valid following is also valid From: someone@somewhere.com [Elijah continues] it will also confuse the regexp. I don't like the ^TO and ^TO_ macros for most things and typically use stuff like this: ^(Resent-)?(To|CC):.*[< ]{address}([ >]|$) It still can be confused, but the things that will cause problems are fairly rare in practice. You might prefer something like this: ^(Resent-)?(To|CC):([^(]+([(].*[)])?)*[, <]{address}([, >]|$) Which can correctly deal with To: (hatter@tea.party) {address} To: (fake {address}) bill.the.lizard@the.jury.box To: Alice , "W. Rabbit (late)" , Gentle Reader <{address}> To: jabberwocky@vorpal.swords.r.us, duchess@the.croquet.game, chesire@no.where, {address}, dinah@meow.org It will still fail for To: (fake <{address}>) mockturtle@tortoise.edu If someone is malicious enough to send you such mail. 20.45 FROM_DAEMON deciphered Here is the exploded FROM_DAEMON regexp as of 3.11pre7 (^(Precedence:.*(junk|bulk|list) |To: Multiple recipients of |( ((Resent-)?(From|Sender)|X-Envelope-From):|>?From ) ([^>]*[^(.%@a-z0-9])? ( Post(ma?(st(e?r)?|n)|office) |(send)?Mail(er)? |daemon |m(mdf|ajordomo) |n?uucp |LIST(SERV|proc) |NETSERV |o(wner|ps) |r(e(quest|sponse)|oot) |b(ounce|bs\.smtp) |echo |mirror |s(erv(ices?|er) |mtp(error)?|ystem) |A( dmin(istrator)? |MMGR |utoanswer ) ) ( ([^).!:a-z0-9][-_a-z0-9]*)? [%@> ][^<)]*(\(.*\).*)? )? $ ([^>]|$) ) ) [era] explains the last regexps as follows: (([^).!:a-z0-9] End of e-mail address token [-_a-z0-9] Another alpha token )? ... or maybe not; [%@>\t ] Address separator -- either or
or a bare address with whitespace around it [^<)]* Skip as long as we don't run into another bracketed address or end of comment (presumably to prevent this from matching inside parenthesized comments in the first place) (\(.*\).*)? Skip optional parenthesized comments and anything after them if found )? ... or maybe not; maybe we just see an ... $ ... end of line instead ([^>]|$) Uh, I should know what this is supposed to do, but I can't quite remember what it's for. I think it had something to do with continued header lines ... Anyone? Does ^FROM_MAILER match on the Return-Path: line? [david 1998-04-29] Apparently not, but it does match on the UNIX From_ line, which usually contains the same address as the Return-Path: header. Does anyone have an idea how I can use this macro but tell it to ignore the Return-Path line in the header? There's probably some way within procmail without the extra fork of formail, but this is easy to think of and easy to write: :0h HEAD_WITHOUT_FROM_=| formail -IReturn-Path: -I'From ' :0 * HEAD_WITHOUT_FROM_ ?? ^FROM_MAILER action If you want to consider only the From: header, try this: :0 * ^\/From:.* * MATCH ?? ^FROM_MAILER action 21.0 Technical matters 21.1 List of exit codes The right place to look is /usr/include/sysexits.h, but the codes should be pretty much standard. These ones are from HP-UX 10 and the code that you will be using mostly is EX_NOUSER or EX_NOPERM. It tells to the sender of UBE to "piss off and delete me from your list; I'm not here" EX_OK 0 successful termination EX__BASE 64 base value for error messages EX_USAGE 64 command line usage error EX_DATAERR 65 data format error EX_NOINPUT 66 cannot open input EX_NOUSER 67 addressee unknown EX_NOHOST 68 host name unknown EX_UNAVAILABLE 69 service unavailable EX_SOFTWARE 70 internal software error EX_OSERR 71 system error (e.g., can't fork) EX_OSFILE 72 critical OS file missing EX_CANTCREAT 73 can't create (user) output file EX_IOERR 74 input/output error EX_TEMPFAIL 75 temp failure; user is invited to retry EX_PROTOCOL 76 remote error in protocol EX_NOPERM 77 permission denied I thought that by using the EXITCODE, I would be assured that the email would be *rejected* but in fact Sendmail 8.8.7 attempts to deliver the "user unknown" to netcom.com, which is obviously wrong? [sean] Sendmail accepts the message, then passes it on to Procmail, either as the local delivery agent, or via a .forward file (depending on your system's configuration). Procmail says "gee, gotta lie about not being here" and rejects the message, when is sent back into the spool, and delivered according to who it appeared to come from. Had SENDMAIL determined the user didn't exist (password file / aliases / virtusertable.txt), then it would have rejected the message right when the remote was doing SMTP RCPT. But the user WAS valid, and so it accepted it. Another scenario is when you have a mail secondary, and your primary (where the user account and procmail are) is down. Some system goes to deliver mail to you, and resolves to your secondary -- which simply holds mail for your primary -- it hasn't a clue which user is valid and which isn't. Well, the (E)HELO (the system sending your primary the message) takes place during the SMTP session, the message is coming from your secondary - not from the original sender. At THAT point, if the user didn't exist, I believe sendmail would be issuing an unknown user error to the secondary, which in turn should mail that message back to who it thinks is the sender (I can't check my Bat book from where I'm at - any sendmail pros are welcome to elaborate). is there any way at all to get around this (force the rejection at delivery time)? Better yet, is there some sort of check to make sure that the Received domain reasonably matches the From: domain? You'd need to have a ruleset in your SMTP Daemon (generally Sendmail) to check domains (which WILL fail on many valid messages, BTW) and reject it WHILE the SMTP delivery session (actually, the negotiation) is in progress. By the time Procmail has the message, you've completely accepted the message, and any rejection you might hope to do is bouncing the mail - to the apparent sender. Such is the problem with forged mail. I wouldn't suggest this tactic for fighting spam anyway - so much of it is forged, and any bounce you send out simply uses up system resources on your machine and those on the system that was spoofed. Spammers don't REMOVE addresses from their lists (they want the lists to look as big as possible when they go to sell it to someone else) -- some have even taken to GENERATING addresses at domains and sending messages to them with the assumption that somebody will probably have an account by that name ("bill@ joe@ dave@ ..."). Use procmail to trashbin (or otherwise file) all the junk and then manually take action on those which get through. 21.2 List of precedence codes The priorities most sendmails recognize are following. The lower the priority, the later the message gets dealt with. A smart vacation program will ignore anything with a list, bulk, or junk priority. --Adam Shostack 0 first-class 30 list 60 bulk 100 junk 100 special-delivery [dan] You should use `bulk' when you distribute files via File Server. The value in the Precedence: header says absolutely NOTHING about the contents of the message itself, it merely suggests a priority level to the mail system. From pp. 668 of the O'Reilly's *sendmail* book, bulk typically has a value of -200 while `junk' -100; thus a message with `junk' will get *higher* priority than that of `bulk' (although this can be changed in the `sendmail.cf' file). Other than on heavily loaded machines, this value won't matter anyway, since all mail will be quickly processed. [Stephen] ...Mail sent by a person is usually considered to be more important than autoreplies generated by some daemon. One way to express the lower priority of autoreplies is by adding a "Precedence: junk" field. This allows mail transport agents to make educated decisions about which mail to forward first (in case the mailqueue gets clogged). Another point is: other autoreply services, like `vacation'. They try to make an effort not to accidentally reply to a message generated by another daemon (e.g. yours). One way they detect this is by looking at the Precedence field. If it contains `junk', they know, this is not something we should respond to. 21.3 Sendmail and -t sendmail -t tag reads To, Cc, Bcc, etc, for the recipient of the auto response? :0h * condition * !^X-Loop: foo@site\.com | ($FORMAIL -rA "X-Loop: foo@example.com" ) | sendmail -oi -t [david] That's not a problem, because formail -r will not generate any Cc: or Bcc: headers unless you tell formail to add them. The only line where sendmail -t will look for recipients will be the To: line. 21.4 RFC822 Reply-To and formail problem with multiple recipients [david] formail -r extracts only one return address, even when the Resent-Reply-To: or Reply-To: header contains more than one (and Stephen has told me he plans to leave it that way). o Looking for the best address to reply to is a completely different algorithm than looking for the best group of addresses to reply to. Finding a group of addresses involves actually determining that you even are searching for a group and not only for one address. Then finding out the best address for each. It's already a tricky business doing this just for one address. o It makes thousands of autoreply recipes vulnerable to mail-storm attacks. Formail tries its best to control the damage even if operated by someone who doesn't know what he is doing. If it were to reply to multiple addresses at times, this damage control is severely undermined. [dan]I understand these concerns; however RFC822 specifically allows for multiple recipients in a Reply-To: header. Given that, it seems that there should be a straight-forward way to deal with this in formail; even worse is that "formail" silently ignores multiple Reply-To: addresses. For (a), wouldn't the Reply-To: (or Resent-Reply-To:) header supersede all other addresses and thus greatly simplify the searching? For (b), how about only using multiple (Resent-)Reply-To: addresses if formail's "-t" option is also specified? Or if you are really worried about mail-storms and existing recipes, a new formail option. 21.5 Procmail and IMAP server [ed] See also ftp://ftp.cac.washington.edu/mail/imap.vs.pop ...This paper is an elaboration on a short note entitled "Comparing Two Approaches to Remote Mailbox Access: IMAP vs. POP", which was written in 1993 and recently updated. The purpose of this paper is to provide more extensive background on message access paradigms and protocols, and then to specifically compare the Internet's Post Office Protocol (POP) and the Internet Message Access Protocol (IMAP) in the context of "online" operation. ...I log in to a set of NFS-ed servers (or more precisely AFS-ed), and my mail comes into another server (not a part of this set) which is running IMAP. So sendmail never delivers mail into /var/mail/$LOGNAME on my login machines, and instead delivers to the IMAP server. Since sendmail never reads my .forward file in the home directory, I figure procmail never gets invoked. You need a program which will fetch your e-mail from the IMAP server and then feed it to procmail. One such program that can do this is fetchmail. Check out http://locke.ccil.org/~esr/fetchmail/. The bad news is that once you do this, you probably won't be able to use an IMAP client to read your e-mail anymore. But that might be good news if you prefer an MUA that reads mbox files but doesn't grok IMAP. 21.6 Machine which processes mail ...The just-installed procmail does not work and I am assuming that sendmail is trying to run procmail on another machine. Is there anyway I could find out the appropriate ARCHITECTURE for that machine [era] The following should tell you the name of the machine which processes mail for the machine you're asking about. You can then try to log in to that machine if you have shell access there, which is something you need to have in order to compile Procmail on it. nslookup -q=mx machine # alternatively use host(1) command If you don't have nslookup (doh) or don't understand what it says, try adding this to your .forward "|uname -a >/full/path/to/home/.uname.out" i.e. this should be there in +addition+ to what else you do. Otherwise this will lose your mail thoroughly, since it reads the mail but doesn't save it anywhere. You might want to save a copy of all incoming mail to a safety mailbox, too, just in case. Like so: /full/path/to/home/safetymailbox |"uname -a >/full/path/to/home/.uname.out" |"IFS=' '&& exec /usr/local/bin/procmail -Yf- || exit 75" If you try this, it is very important that the file safetymailbox exists and is writable. (`man' `5' `forward' if you have that -- I don't seem to have this manual page on systems with newish versions of sendmail, is that correct?) Try the `uname' command (and/or read the manual) to see what you should expect to find in the file .uname.out 21.7 Compiling procmail and MAILSPOOLHOME ...I am compiling 3.11pre7 on a new system and have a couple of questions. I edited the makefile to be the home directory "/home/a/abc" for example. I defined MAILSPOOLHOME as "/mail". The incoming mail is actually stored in "/usr/mail/abc". When I pipe test messages through procmail (using "procmail] ...The trouble with rapid delivery MTA's and SmartList(is not!) is multigram and the bounced email processing feature and large lists. If you run small lists it's not so bad. But with 30k+ subscriber monthly announcement lists, I have to redirect bouncing email someplace else. The faster the mail is delivered the faster the bounces come in. The larger the list, the more multigram bogs down and the more procmail processes accumulate and then you get file table overflows and all that stuff from the load being sky high and hundreds of processes hanging around. Also because alot of mail servers don't behave the way we would like them to and return to us proprietary bounced email messages that SmartList can't understand, the bounce feature is only able to successfully remove a portion of the offensive email addresses, requiring the listowner or some one to manually go through it all anyway. SmartList is not covered by the GNU GPL -- the copyright notice in the docs do say that changes/modifications can be made if they are 'marked'. Personally, I think the bounced email removal system needs to be entirely redone if SmartList(is not!) is to be able to look forward to the future enough to merit further development. "Other MLM software" o majordomo uses Perl o Mailman uses Python http://www.list.org/ o SmartList uses scripts/procmail o Listar Mailing List Package (free): http://www.nausicaa.net/~listar/ o L-Soft international, Inc. (non-free): http://www.lsoft.com/ o The Petidomo Mailing List Processor and Manager (non-free): http://www.petidomo.com/ o Mailagent (free): http://www.foretune.co.jp/people/shigeya/mailagent/ o BeroList (free): http://www.in-trier.de/~bero/BeroList/ 22.3 SmartList code (mailing list implementation with procmail) "Smartlist 'faq'" http://www.mindwell.com/smartlist/ "Mark's Smartlist add-ons" Mark David mcCreary ftp://ftp.mail-list.com/ ...front-end for Smartlist mailing lists, and allows people to mail to list-on@domain.com and list-off@domain.com, which then creates and sends a properly formatted subscribe/unsubscribe message to the list-request address. It also handles change of address, switches to/from digest lists, moderated subscriptions, and a few other things. My experience is that if you are planning on running lots of lists, then eliminating questions/problems from subscribers is of paramount importance, and those procmail recipes may be worth the time to learn/tweak. --Mark "Michelle's (SmartList add-ons) Confirmation cookie" ftp://ftp.fatfree.com/ confirm-1.1.tar.gz ftp://ftp.rahul.net/pub2/artemis/ confirm-1.1.tar.gz To add subscription confirmation to smartlist "The mail-list.com front-end for Smartlist Mailing Lists" ftp://ftp.mail-list.com mark david mcCreary to start the subscription process. "Auto respond to 'help: is there faq?' " http://www2.inow.com/~conover/ rel.tar.zip "Moderated lists -- Perl script" http://www.mjolner.com/~lbr/moderate/ 22.4 Installation trouble: getparams Does anyone out there know what the error means when it occurs when installing Smartlist? Procmail is already installed on the system (by the sysops) make: *** No rule to make target `getparams' [Hal Wine] Yes, it means that you haven't built procmail yet. Build procmail first, then execute Smartlist's install.sh script. You need to get and untar the procmail sources in your own directory, then get and untar the corresponding Smartlist sources in the same directory tree. Then build (but don't install) procmail, then install Smartlist using the install.sh script. Smartlist uses and builds files in the Procmail source tree, so that has to be done first [sysops] don't have the time to mess with getting Smartlist running. Obviously,when I attempt to install Smartlist, it's not finding Procmail. What do I have to do to get the install program to find Procmail? If the sysops aren't going to install Smartlist, read all the sections in Manual about non-root use of Smartlist (it works fine). You should make sure that smartlist, when invoked, uses the matching version of procmail. This means either use the version of Smartlist that matches the sysop installed version of procmail, or set up your PATH such that you use the version you built. If you use your own version, make sure it uses the same locking strategies as the "official" version. 22.5 Accepting mail only from users in whitelist(s) 1998-10-08 PM-L Dave Robbins. ML = /usr/local/lib/aliases ACCEPTLIST = "$ML/mylist.accept $ML/everyone $ML/others" FROM = `$FORMAIL -rtzxTo:` :0 * ? echo "$FROM" | $EGREP -i -f $ACCEPTLIST * ? test -r $ACCEPTLIST -a -s $ACCEPTLIST { :0 HB ! `cat $ML/mylist` } :0 * ! ^FROM_DAEMON * ! ^FROM_MAILER *$ ! $MY_XLOOP_LIST | ($FORMAIL -rtk \ -A "$MY_XLOOP_LIST" \ -A "Precedence: junk"; \ echo "Your post to mylist@magic.geol.ucsb.edu was not successful\n" \ "because the mailing list is restricted to submissions\n" \ "from only certain individuals and groups. Sorry.\n" \ ) | $SENDMAIL -oi -t 23.0 Additional procmail or MUA software 23.1 Comstat to handle multiple mailboxes ftp://ftp.belwue.de/pub/unix/xcomsat.tar.gz 23.2 Elm and pgp support (Mutt is the successor to elm.) Mutt's primary site is ftp://ftp.guug.de/pub/mutt/ with various mirrors outside the US to avoid the crypto distribution problem. If you want elm, "Michael Elkins' ftp directory" ftp://ftp.cs.hmc.edu/pub/me/ http://www.cs.hmc.edu/~me/mutt/ http://www.cs.hmc.edu/~me/elm/me.html [Liviu Daia mentions that] ...Provided that you configure it correctly, it will use lynx to convert HTML attachments to plain text automatically, and display them in its pager. You can reply in plain text to those attachments, and you can also do the same thing with any kind of attachment for which you give it a way to convert to plain text. It's definitely not aimed at the beginner level like Pine, but it's far more powerful too. Also GPL-ed. 23.3 MH sites "New MH" ftp://ftp.math.gatech.edu/pub/nmh/nmh.tar.gz http://www.math.gatech.edu/nmh/ 24.0 Additional procmail software for Emacs 24.1 What is Emacs ...first thing I learned on a Unix machine was that `vi' is a text editor and `Emacs' is a way of life. --David W. Tamkin _Emacs_ refers to a programming platform (it's not only a text editor, or a programming editor, but it does almost everything you tell it to do except make your coffee) which can be found almost in any Unix platform. Nowadays Emacs is also available for the PC platform too. There are two flavours to choose from: Emacs, maintained by the FSF (Free Software Foundation), and XEmacs, sometimes called "Emacs the next generation", because it has a better graphical user interface (gui) and internally advanced OO design (it can highlight on tty, whereas Emacs can't). XEmacs is being maintained by group of programming wizards. See #URL-BASE/elisp.html Emacs add-in packages are lisp and the lisp file extension is *.el*. Inside each package one finds instructions how to use and how to install the package into Emacs. 24.2 Emacs and procmail mode and Lint Procmail mode for Emacs (which can also lint procmail recipes) is available. People familiar with C-coding know lint, which is a rigorous code syntax checker. You can read about this Emacs mode from http://poboxes.com/jari.aalto/tiny-tools.tar.gz 24.3 Emacs and lining up backslashes Some time ago I wrote makefile to my Emacs tgz kit and as a side effect I got frustrated with the use of backslashes within the make rules. This backslash problem is universal in almost every programming language, (eg. C/C++ macros) including procmail, where you sometimes use `echo' a lot, :0 h * condition | ( cat -; \ echo "And the body text\n" \ "follows here with\n" \ "these echoes"; \ ) | $SENDMAIL Ouch. That looks bad. Any line up tool anywhere? Yes, get my Emacs tiny-tools.tar.gz and look at the file `tinymy.el' which defines function `timy-backslash-fix-paragraph'. Here is piece of lisp code that you stick to your .emacs to make the key `Control-\' to run the backslash fix (global-set-key "\C-\\" 'my-backslash-default-column) (defun my-backslash-default-column (&optional arg) "Col 76." (interactive "*P") (autoload 'timy-backslash-fix-paragraph "tinymy" t t) (timy-backslash-fix-paragraph (or arg 76) 'verb) ) After that, you just put your cursor inside paragraph and hit `Control-\' to get the following line up effect. The column position is best to set near right margin, but not further than a regular page's maximum column 80. :0 h * condition | ( cat -; \ echo "And the body text\n"; \ "follows here with\n"; \ "these echoes"; \ ) | $SENDMAIL Guys, Emacs is available for every platform, even for Windows95 and WindowsNT. So, go ahead and install one if you haven't already. Setting up your personalised Emacs may require steep learning curve, but it's well worth the effort :-) 24.4 Emacs and browsing mailbox files If you use Gnus as your MUA, then you already can browse mailboxes. If you just want to read some arbitrary mailbox without firing up Gnus, then you can use package `tinymbx.el' It defines a special mailbox reading minor mode that is activated when you visit mailbox file. You can copy, file, delete messages or mail the author of the current message. There is no separate summary buffer as in RMAIL, but you move from message to another with PgUp and PgDown keys. #URL-BASE/tiny-tools.tar.gz 24.5 Emacs and live-mode.el http://www.zanshin.com/~bobg/ from Bob Glickstein 1997 ...`live-mode' is a minor mode that works like the "tail -f" Unix command. If the file grows (or changes in any other way) on the disk, then the buffer copy is periodically updated to show the new file contents. This makes `live-mode' ideal for viewing such things as log files. --Bob You definitely want this if you browse procmail log files. This package updates the logfile buffers whenever they change on disk. You can think it like *biff* if you record incoming file to short `$BIFF' log. 24.6 Emacs and font-lock.el `Font-lock' comes standard in Emacs releases. You can colorize your .procmailrc if you use `font-lock'. Here is some lisp code; put it in your .emacs and reload it with `M-x' `load-file'. When you load file that matches `procmailrc' or `procmail.log' the font-lock attributes for the file get set. Change the regexp if your procmail filenames are different. (add-hook 'find-file-hooks 'my-find-file-hooks) (defun 'my-find-file-hooks () (require 'cl) ;; colors are available to Emacs only under X window (when (and window-system (fboundp 'font-lock-mode) ;; make sure this is present ) (cond ((string-match "procmailrc" buffer-file-name) (setq font-lock-keywords (list '("#.*" . font-lock-comment-face) '("^[\t ]*:.*" . font-lock-type-face) '("[A-Za-z_]+=.*" . font-lock-keyword-face) '("^\\*.*" . font-lock-doc-string-face) )) ;; Turn the fontifying mode on if it's not on already (unless font-lock-mode (font-lock-mode 1)) ) ((string-match "procmail.log" buffer-file-name) ;; The strings "" in the procmail log makes font-lock crazy, ;; We kill the String class from the buffer with ;; these statements. ;; (let ((table (make-syntax-table))) (modify-syntax-entry ?\" "_" table) ;; Change " (set-syntax-table table)) (setq font-lock-keywords (list (cons "Opening " 'font-lock-type-face) (cons ".* error .*" 'font-lock-keyword-face) (cons "Folder:" 'font-lock-type-face) )) (unless font-lock-mode (font-lock-mode 1)) )) )) ;; End code 25.0 Procmail, Emacs and Gnus 25.1 Gnus pointers "Gnus" http://www.ifi.uio.no/~larsi "Gnus manual: procmail" http://www.ifi.uio.no/~larsi/www.gnus.org/manual/gnus_6.html#IDX1501 "Gnus Hypertext search archive" http://www.miranova.com/gnus-list/ 25.2 Why use procmail with Gnus Gnus has very powerful mail split methods and one normal reaction against the need of procmail is: "Hey, Gnus does my mail splitting, I don't need procmail". The difference between Gnus and procmail splitting is quite easily explained: you want procmail to preprocess the mail before gnus ever sees it and then postprocess the mail with Gnus (read, move mail from the inbox to another) _Case1_: Gnus and regular mailbox, no procmail. Gnus reads directly one huge mailbox where all incoming messages are. When the user starts Gnus, it slurps in the whole mailbox and starts splitting the mail according to the its split rules. mail -> $MAIL --> fire up Gnus --> split1.mbx split2.mbx .... _Case2_: procmail and Gnus. The email is always delivered to procmail first. Procmail is free to put the mail anywhere or just let it drop to the user's default inbox, usually pointed by environment variable $MAIL. mail -> procmail --> Post processing with Gnus [the ~/Mail/spool] --> split1.mbx --> split2.mbx [The default procmail rule drops to inbox] --> $MAIL You can let gnus to process the messages further: like moving messages from one inbox to another. Summary o If you use procmail, the incoming messages are immediately categorized. The incoming email is put in the folder of your choice. The mailboxes are there waiting for you all the time. You can use `less' or `more' to view them in a hurry. o If you don't use procmail and let Gnus to do all the splitting, you always see one huge inbox, $MAIL. It will not be split until you fire up Emacs and Gnus. If you're in a hurry, you may not have time to start Emacs & Gnus, before reading the important messages. Your only option is to read all messages in $MAIL and try to find the ones that consider eg. you work. So, let procmail drop messages to their inboxes and Gnus to possibly "fine process" these inboxes. 25.3 Setting up gnus for procmail - Basics Procmail and Gnus communicate with each other very nicely when you use the mail backends like: `nnml', `nnmh' and `nnfolder'. See Emacs info Gnus::Node: `Select' `Methods' for more. Here are step by step instructions for reading the mail with `nnml' mail backend. We suppose that you have the following definition in your .procmailrc so that the incoming mail is delivered to the right directory. The important point here is that the name of the gnus `nnml' group is identical; except the `.spool' suffix, to the spool file where procmail writes. So if you write to `list.procmail.spool', the group name in gnus is named `nnml:list.procmail' # .procmailrc excerpt PMSRC = $HOME/pm MAILDIR = $HOME/Mail SPOOL = $MAILDIR/spool RC_LIST = $PMSRC/pm-jalist.rc # The file name must be list.xxxxx.spool in order to # `nnml' to work in Gnus.Define procmail mailing list PROCMAIL_SPOOL = $SPOOL/list.procmail.spool # GNUS must have unique message headers, generate one # if it isn't there. By Joe Hildebrand :0 fhw | $FORMAIL -a Message-Id: -a "Subject: (None)" # detect mailing lists and store messages to spool directory INCLUDERC = $RC_LIST :0 : * ! LIST ?? ^^^^ $SPOOL/list.$LIST.spool o Copy the Lisp code below to your ~/.gnus o Start Gnus with `M-x' `gnus-no-server' (M-x means ESC followed by x). You will see *Group* buffer to appear. o Make the new group with `G' `m' `list.procmail' RET `nnml' RET. You can read the group as usual and query new mail with `g' command. (setq gnus-secondary-select-methods '((nnml "")) ;; See also nnmail-procmail-suffix which is .spool by ;; default ;; nnmail-use-procmail t nnmail-spool-file 'procmail nnmail-procmail-directory "~/Mail/spool/" nnmail-delete-incoming t ) And then I have procmail always deliver to ~/Mail/spool/. If you add more inboxes, create them inside gnus *Group* buffer with `G' `m'. 25.4 Gnus for procmail - More gnus Okay, let's continue our journey in Emacs. What you read previously was the minimum you needed to get your Gnus to read procmail delivered files. However, if you're new to Gnus, here are some more tips and basic instructions. The best advice I can give is that you go to each buffer: In group, you press `G' `C-h' and in Summary `C-h' `m' and print the commands to printer that you see listed. In Group buffer o When you press `g' to get new mail to these groups, the group _disappears_ if there is no mail. If you want the group to be permanently visible, then set (setq gnus-permanently-visible-groups "^nnml\\|^nnfolder") In emergency, press `L' to list all groups. o If you made a mistake and wrote `list.procmaill' with an extra `l' accidentally in the group name, use `G' `r' to rename group. o Raise or lower the priority of your procmail mail groups with `S' `l'. Values 1 or 2 or 3 are good. Consider reserving 1 for your primary mail and 2 and 3 for mailing lists. o When you exit a group and have read some articles, they won't show up next time you go there. But by giving prefix argument before entering the group with `SPC', Gnus will list all read articles. You give the command like `C-u' `SPC', where `C-u' is the prefix argument. Settings o You want gnus to tell you everything it does (setq gnus-verbose 10) ;; 0..10 o You expire articles (get permanently rid of them) with the 'E' command in the *Summary* buffer. The default expiry time is 7 days. You can define the expiry time in days with (setq nnmail-expiry-wait 7) o If you read mailing lists, you want automatic expiry when you have read the article. Use the following to set up groups that use this automatic expiration. (setq gnus-auto-expirable-newsgroups (concat "procmail" "\\|other-list" "\\|and-some-other-list" )) o `B' `e' in the *Summary* buffer expires current expirable articles. o If you want to kill an article; permanently remove it from disk, use `B' `delete'. o If you want to mark an article as *persistent* (never expires), use `*' o You don't want these mail groups cached because mail is already in "cache" format. The cache is needed only when you read newsgroups and want to store messages locally. (setq gnus-uncacheable-groups "^nn\\(virtual\\|m[hlk]\\|db\\)") 25.5 Emacs and Gnus -- Fiddling with spool files Well, to tell you the truth, managing Gnus is scary at first: You can make a lot of mistakes along the way or otherwise change your mind about group names and so on. It's a tricky task to move mail from one directory to another if you decide to rename the spool file name where procmail is putting the filtered mail. Let's take an example: Say you decide to change the spool file name list.procmail.spool to mail.procmail.spool, because you come to think that all your mail groups should have the same prefix "mail." in your Gnus group buffer. You already changed procmail to output to that file, so now you have two files sitting in your spool directory. ~/Mail/spool/list.procmail.spool ~/Mail/spool/mail.procmail.spool # make sure this exists o Let Gnus read the old file as usual. Press `g' read new mail to `list.procmail'. list.procmail.spool will now be empty and merged to `nnml' backend file nnml:list.procmail. o Make a new group with `G' `m' nnmail `mail.procmail' in *Group* buffer. o Go to the old `list.procmail' group and select all articles with `M' `P' `a'. Move the messages with `B' `m' to `mail.procmail'. You will see `G' marks appear to the beginning of moved articles. o Exit the *Summary* buffer and hit `g' to see that the messages hat were transferred to your new `mail.procmail' o Kill the old group `list.procmail' with `G' `DEL' o One more thing, remove that empty spool file. It is no longer used for anything. % rm ~/Mail/spool/list.procmail.spool 25.6 Gnus and article snippets [These articles have been collected from the GNUS hypertext archive] !! I'm also a bit confused with the proposed solution of having procmail filter incoming mail in a `nnmail-procmail-directory' instead. You have Procmail stuff mail in spool files, pre-sorted and filtered. Gnus then picks these up and stuff the messages in the appropriate groups. Gnus uses movemail to actually move the mail out of the spool, and movemail uses locking that Procmail understands, so there is no danger of mail loss. Why are `nnfolder-directory' and `nnmail-procmail-directory' two different directories if `nnmail-procmail-directory' will contain the mail boxes that procmail appends to and `nnfolder-directory' is supposed to be "All the nnfolder mail boxes will be stored under this directory"? Because Procmail should stuff its mail in different folders, _not_ in the ones that your regular mail is stored in. Is the idea to have Gnus use `nnmail-procmail-directory' as a temporary directory that it draws from to process and then deposit nnfolder mailboxes in the `nnfolder-directory' ? Yep -- Jason L Tibbitts III (tibbs@hpc.uh.edu) !! Procmail settings (setq nnmail-use-procmail t) (setq nnfolder-directory "~/gMail/") (setq nnmail-spool-file 'procmail) (setq nnmail-procmail-directory "~/incoming/lists/") (setq gnus-secondary-select-methods '((nnfolder ""))) (setq nnmail-procmail-suffix "") Procmail is adding incoming mail to ~/incoming/lists/listname. The nnfolder groups I subscribed to are named "nnfolder:lists.listname" Gnus does create the ~/gMail/lists directory with a zero length file in this directory for each list, but doesn't move any mail over and so it thinks I have "No more unread newsgroups". (nnmail-get-spool-files) After much experimentation, I finally got movemail to work. I changed `nnfolder-directory' to "~/gMail/lists/" and Gnus now moves mail from "~/incoming/lists/" to corresponding groups in "~/gMail/". My problem seems to be solved, but still these workings seem counter-intuitive to me. By what the manual has to say about `nnfolder-directory' I would think Gnus should build the nnfolder groups in "~/gMail/lists/" instead given my definitions. I think nnmail expects the spool files to be called "~/incoming/lists.whatever", not "~/incoming/lists/whatever". (setq nnmail-procmail-directory "~/incoming/lists/") I thought you said the groups were called "lists.whatever"? So the spool files were called ~/incoming/lists/lists.whatever.spool, then? 25.7 Emacs GNUS - POP - Procmail Is it possible to get new mail via POP, run it through procmail (for quick things like trashing junk mail and archiving mailing lists) and then have Gnus do its own mail processing? This is basically what I do now with procmail in my .forward file and all output going into ~/.MailBox for Gnus to find. [Mark Moll (mmoll@cs.cmu.edu) 08 May 1997 ] First, let Gnus know that you're using procmail: (setq nnmail-use-procmail t nnmail-procmail-directory "~/Mail/spool/" nnmail-procmail-suffix "" nnmail-spool-file 'procmail) Second, let gnus pop your mail every 5 minutes and invoke procmail: (defun mm-pop-mail () (interactive) (call-process "/usr0/mmoll/bin/procinc")) (gnus-demon-add-handler 'mm-pop-mail 5 t) (gnus-demon-init) Finally create the following script (called `procinc' in the previous step): #!/bin/sh MOVEMAIL=/usr/local/lib/xemacs-19.14/lib-src/movemail ORGMAIL=$HOME/.newmail $MOVEMAIL kpop://ux2.sp.cs.cmu.edu/mmoll $ORGMAIL # this is copied from the procmail (1) man page: if cd $HOME && test -s $ORGMAIL && $HOME/bin/lockfile -r0 -l3600 $HOME/.newmail.lock 2>/dev/null then trap "rm -f $HOME/.newmail.lock" 1 2 3 15 umask 077 $HOME/bin/formail -s $HOME/bin/procmail < $ORGMAIL && rm -f $HOME/.newmail.lock fi rm -f $ORGMAIL exit 0 Instead of using a demon you can, of course, also pop your mail manually by pressing `g' in the *Group* buffer if you add the following line to your ..gnus: (add-hook 'gnus-get-new-news-hook 'mm-pop-mail) !! From: Markus Dickebohm 1997-06 Recently I switched to procmail to filter some mails from high volume mailing lists out of my inbox (I don't like my mail notifier do blink every few seconds). Personal mails and mails from some low volume lists stay in /var/spool/mail/$USER. I set `nnmail-use-procmail' and both the personal mails and the procmail-filtered mails are incorporated to Gnus. That's exactly the way I like it. Today I started Gnus and to new nnml groups showed up. The reason was that the procmail rule produced a file "ding.spool" while the nnml group I used for this list via the `nnml-split-method' variable was "Ding". This behaviour shows that Gnus doesn't split the procmail filtered mails again. I understand the manual that the variable `nnmail-resplit-incoming' is responsible for that. Do I have to set this variable or is it OK to get the procmail rule and `nnmail-split-method' in sync? The manual says.. "This also means that you probably don't want to set `nnmail-split-methods' either, which has some, perhaps, unexpected side effects." This is not what I want, since the remaining mails in /var/spool/mail/$USER should be split further by Gnus. Do I really have to decide to use procmail _or_ `nnmail-split-method' or is it justified to get the best from both? !! in the Info file, section `Mail & Procmail' (or so), I read: ... If you use `procmail', you should set `nnmail-keep-last-article' to non-`nil', to prevent Gnus from ever expiring the final article in a mail newsgroup. This is quite, quite important. Why? I thought this was important only if the `nnmail-use-procmail' variable is nil and the .overview files are updated with a script. When nnmail-use-procmail is t and procmail writes its stuff to the spool files, (ding) knows everything about all its messages. ... being able to reliably deliver mail directly to (ding)'s nnmh directories, for example, using procmail would be very nice... As already hinted at by Per Abrahamsen this is possible as long as you *don't* move or copy articles (within) ding into these directories. Just set `nnmail-keep-last-article' to be true. But that's an awfully big exception to what would be a rather nice feature. Certainly filing mail into different mail groups is something I do on a regular basis. That's why I am advocating pre- and `post-hooks' for all modifications to the overview/active information. With that in place, it would be possible to use a locking mechanism to prevent procmail and (ding) from both trying to modify these files at the same time. Then, copying and moving messages between mail groups during procmail deliveries would be 100% reliable. Unfortunately, there's no simple way to allow moves and copies into groups that have external delivery agents. The preand post- hooks stuff will solve the problem of safe overview / active file update. This is only part of the problem for move/copy. If an article has arrived since you last checked for new news, then ding doesn't quite "see" it (as it doesn't "see" new news until you ask it to look). What's needed here is for ding to update its notion of what the last article in the group actually is before doing the move/copy--ie., to run a local *-get-new-news (of course, locking via a hook is still required). Adding this will need a lot of mucking around with the internals, the way things currently stand. Another approach entirely might be to wait until the stuff that was discussed for IMAP gets added--where ding asks the backend for all information and doesn't maintain any state in .gnus. It'll be simple then to make the backend check for new mail before actually copying/moving the article--ding won't have to be fooled as to what the actual article numbers are. You could add something like this right now, but I think it'll really stretch the code some. (cf. gnus-cache.el for the meaning of "stretch" :-). 26.0 RFC, Request for comments 26.1 RFCs and their jurisdiction (munged Addresses) Try dejanews Groups: gnu.emacs.gnus Search: RFC The real implementation of news software doesn't care if the from field is munged or not [1998-03-25 gnus.emacs.gnus, Marty Fouts ] The point of the argument is: The RFCs don't demand what those who would quote them to suppress munging claim they do. In particular, RFC 1036 is advisory, an _attempt_ to describe how netnews works with NNTP. In the case of header munging, RFC 1036 does _not_ describe the way the software works in the field. There is no reason to cite an advisory RFC that in many ways is incorrect to support an untenable position. _Note:_ Marty is an IETF USEFOR and has a good understanding how the RFCs should be interpreted. See gnu.emacs.gnus 1999-02-08 and theread / Re: "Sender" field/. [1997-11-05 gnus.emacs.gnus, Marty Fouts] No RFC forces the address of the poster to be a *reachable* address (indeed, Sender: is sometimes user@host without the domain part) -- it only requires such addresses to be syntactically correct. The RFCs do _not_ require anything. The RFCs related to usenet are *advisory*. RFCs describe various things and define a small number of standard protocols, netnews is _not_ an internet standard protocol.) o Not all RFCs are standards o RFC 1036 _specifically_ states that it is not an internet standard. o The wording of RFC 1036 and 822 WRT to the RFC 1036 header is ambiguous. RFC 822 _specifically_ describes the format of a mail message. It does not describe the complete format of an electronic mail address. o Nowhere in 1036 is there language requiring that the address be deliverable to. Further, 822 provides language that would allow for a valid but not deliverable address to be acceptable. [822 doesn't describe addresses, it describes _mailboxes_, which are something similar but not identical.] The bottom line WRT RFCs that are informational is that when there is an ambiguity, or a difference between the RFC and the implementation, the implementation (which is what the RFC was trying to describe in the first place) has precedent. As much as y'all want it to be otherwise, the _implementation_ of netnews, (I. E. INND, NNTP) doesn't care about whether or not an address can be replied to. It is rumoured that some news posting software checks the validity of an address. Such software is in a _tiny_ minority. [counter argument 1998-03-25 gnu.emacs.gnus, Jan Vroonhof ] Now although INND and friends are important parts of the usenet software bundle the news READERS are even more important. Now I'll bet 99% readers, like f.i. Gnus, assume the address in the header is the address to be replyed to when the user requests to go into a private discussion with the author (i.e. reply instead of followup). [marty] netnews is a *public* forum. mail is a *private* communication medium. Posting in a _public_ forum does _not_ require that I give you access to my private address, just as speaking at a public meeting does not require that I give you my unlisted phone number. One thing is for certain: putting the burden on anyone wishing to send an email to you, by requiring them to decipher the address. Someone may never "reply by mail" to persons using those phony addresses. Anyone who wishes to send a personal email cannot just hit 'reply'. People who do this accept this, which is they will watch the newsgroups for followups regularly. If someone eagerly wants to get personal, he can spend the extra minute to decipher the correct address for the person. --Marty [counter argument, vroonhof] However if you don't want to give me your phone number, why give me a false one? If people with this desire at least put only their name and had no "" part then one could have the news reader say "Reply impossible, no address given". [Counter argument, unknown] When I was using Pegasus Mail (Win95), it took me about 10 minutes to set up filters that removed over 75% of the spam I received. 10 minutes is too great a burden to you? MY, what a busy person you are. [timothy] What about the accounts from which I do not control (network at work) where I do not have say over what software is installed? I can say to the sysadmin ``Hey I'd like Pegasus mail installed'' and he nods and mumbles something. He's got 2 years worth of backlog from there not being a real sysadmin around [Counter argument, unknown] Furthermore, there are a number of procmail recipes available on the net, that can be used with minor adjustments to filter your mail. No heavy-duty unix skills are required. Just the initiative to take responsibility for your own problems. I know procmail very well, and spammers are still getting through. You know why? They refuse to follow all the conventions we depend on. And they spam mailing lists, so I have to filter for that as well. I have spent untold hours trying to develop better and better filters with lower numbers of mis-hits. Nothing works as well as not giving more spammers my address. ...You simply prefer to put the problem off on somebody else, rather than take the time to deal with it yourself. Well, that kind of laziness does seem to predominate in the "world of the internet" these days. I have spent the time, learning from what others have done and seeking to improve them. You are certain you are right and refuse to think about it anymore.... and that kind of laziness is all over the Internet. The only one it wrongly inconveniences are those who need to email me and have lost my email address. If you want to followup a Usenet post, do it in Usenet. I'll be back here for followups. I get enough email, and don't need email for Usenet threads. If you would like me to use a real address, please set me up an account with procmail where I can get all my Usenet related messages sent. --Timothy 26.2 Comments about addresses munging [1998-03-24 gnu.emacs.gnus ] ...I am well aware that it is bad behaviour, as I am well aware that it breaks standards. However, I'm *also* well aware of the fact that I do not need to have a mail-box filled with spam every time I look at it. Things have quieted down considerably since I started altering my From: line. There's still the occasional that gets me, though. It's not really such a big deal right now, but after following the net-abuse newsgroups for a while, it has become apparent to me that spammers are trying new tactics to grab email addresses (msg id's, sender: lines, etc...). Since I have to download most of my mail from a POP3 account, it takes time that I don't have to wait for all that spam to download. If breaking my headers means getting a few moments peace and freedom from spam, then so be it. [M. Maxwell 1998-03-26 gnus.emacs.gnus] ...Believe me, I *don't* like having to do this <
> at all. But it saves me *considerable* aggravation. I also don't have to download my mail from a POP3 server (my ISP has a shell account), but I prefer to read mail offline simply because I get so much of it with all those mail lists, And since that's the case, I end up downloading plenty of junk along with the legit mail, after which, my local procmail puts it where it belongs. In other words, not in my inbox. And so I'll do what I have to to foil the spammers (until we get some sort of legislation passed on junk email). And those that *do* get past the fouled headers are dealt with accordingly. 26.3 RFC and valid email address characters What characters are legal in e-mail addresses? So far, I have uppercase, lowercase, digits, _ - + . @ [elijah] Most any 7bit character. For all practical purposes whitespace (space, tab, newline) are really inadvisable. This post is from a valid address. I also have ones with control characters -- eg <@qz.to> (may not show up right in your newsreader). See RFC822 for the full rules on generating an address, but the quick and dirty thing is any of the "specials" must be quoted to be used. See definition of `specials' in RFC specials = ()<>,;:\.[] and a double quote If you don't believe me, there are mail toys to prove this. Best one I know of right now is Tom Phoenix's <"fred&barney"@redcat.com> address. You can replace the "&" with just about any string I believe. I've tried it with stuff like <"fred($)barney"@redcat.com> and it seems pretty stable. 26.4 RFC and login-name@fdqn [1998-06-08 Message-ID: Marty Fouts in gnu.emacs.help. Refer also to summary of the whole thread in 1998-06-11 Message-ID: by Marty Fouts.] >>>>> In article , >>>>> Rich Pieri enscribed: > -----BEGIN PGP SIGNED MESSAGE----- > Marty Fouts writes: >> Sort of: system-name is not a hook into gethostbyname. The >> /variable/ system-name is set by a builtin defvar to >> gethostbyname. system-name returns the value of the /variable/ >> system-name, and the emacs lisp manual advises setting it if it >> is not correct. > It still uses gethostbyname() to set the initial value. > gethostbyname() is supposed to return an fqdn on a networked > host. So? That the initial value is an FQDN is no indication that the value returned at any time thereafter will be. This is why emacs doesn't use system-name to create email addresses, but has a separate function. If emacs itself doesn't rely on system-name to generate any email addresses, why should gnus? >>> user@fqdn is the agent responsible for submission of a >>> message to the network. user@fqdn is the RFC sender of the >>> message. user@fqdn therefore must be made to be a valid >>> mailbox. >> This is just flat out wrong. There is no such requirement in >> any RFC or implied by any combination of RFCs. > Premise: Gnus is used interactively. Premise: "user" > (user-login-name) is the login name of the person using Gnus. And that's where you fail first. There is no requirement anywhere in any RFC or combination of RFCs that a login name even exist. Although your premise is true, it is irrelevant to your conclusion, as explained below. > Premise: "fqdn" (system-name, self-referential gethostbyname) is > the canonical network host name of the machine "user" is using at > the time. And that's where you fail second. There is no requirement anywhere in any RFC or combination of RFCs that the machine "user" is using be exposed as a part of a mailbox. I am /allowed/ to do that, and if I do that I am required to support that mailbox as valid. I am *not* /required/ to do that. I've already cited, and will repeat, that a TIP is a good example of such a machine. So is a POP3 client. You are missing some more premises, most notably that user@fqdn is the _sender_ of the message in the sense of any RFC or combination of RFCs. Most importantly, you are missing some steps in your logic. o You have not established that the /sender/ field's mailbox has to be the one you would construct from user-login-name@system-name, even on a system where such a combination formed a valid mailbox. o You have not established that user-login-name@system-name be required to form a valid mailbox, even if the system has the concept of a login-name and both user-login-name and system-name return what you expect them to. Nor will you be able to, because there are no such requirements. o There is /no/ requirement /anywhere/ in any combination of RFCs that it be possible to construct a mailbox from the combination of a "login-name" of any sort and an FQDN. o There is /no/ requirement /anywhere/ in any combination of RFCs that a "login-name" even exist. o There is /no/ definition /anywhere/ in any combination of RFCs for the concept of a "login-name". To put this as simply as possible: You are incorrect to assert that there is any requirement that a system support the mapping from (login-name,FQDN) to a mailbox of the form login-name@FQDN. Once you understand that this assertion is incorrect, it should be easy to see that all assertions derived from it are incorrect. 26.5 RFCs and messages signature http://www.chemie.fu-berlin.de/outerspace/netnews/son-of-1036.html According to universal defacto Net convention, there must be "\n-- \n" before signature. The extra space in signature delimiter tells that it is user's messages and not the Message Digest that uses delimiter "\n--\n". There is no RFC that would address this though. And by the way: it's rude to have a longer sig than 1-3 lines. Better yet, move the repetitive information to the X-headers if your MUA supports modifying the headers. _NOTE_: The choice of delimiter is somewhat unfortunate, since it relies on preservation of trailing white space, but it is too well-established to change. [Paul O. Bartlett ] Eg. When one is writing text, the preferred Un*x editor routinely truncates trailing blanks when writing a file, so that even if there were "-- " in the .signature, Pine includes it automatically as part of the editable text, and the editor would simply truncate the blank. The signature delimiter may be "too well-established to change," but it collides with the reality of the tools people use. 26.6 RFC and using MIME in usenet newsgroups [1999-02-12 Marty Fouts in gnu.emacs.gnus in Message-id: ] The use of MIME is debatable. The use of MIME in a USENET posting is inexcusable, except for the case covered in draft by: http://www.ietf.org/internet-drafts/draft-ietf-usefor-article-01.txt Insofar as there exist authorities empowered (by common consent or otherwise) to define what is and is not proper in various hierarchies or newsgroups or cooperating subnets, those authorities ought to establish, by means of rules, guidelines, charters or whatever else, the practices considered acceptable within their domains. In particular they ought to establish which of the more exotic content types are likely to be inappropriate. In the absence of such specific guidance, the following default recommendations are offered as an indication of best practice at the present time. Note that the comment "is inexcusable" is my opinion. The draft, contrary to your apparent understanding, merely gives -guidelines- for how to use mime headers. If you, or anyone else, feels that the draft replacement for RFC 1036 needs to be worded differently, you are welcome to join the task force and attempt to persuade the members of this. However, a warning is in order: the process has been ongoing for several years, deadlines approach, and this particular issue has been argued in a great deal of detail. 26.7 Some RFC Pointers http://www.cis.ohio-state.edu/hypertext/information/rfc.html http://ds.internic.net/rfc/ http://www.nexor.com/public/rfc/index/rfc.html http://www.it.kth.se/docs/rfc/ o rfc821 SMTP protocol, see also rfc959 FTP protocol standard o rfc822 Format of internet messages (formerly called as Arpanet) A new draft that is likely to replace 822 is at: ftp://ftp.ietf.org/internet-drafts/draft-ietf-drums-msg-fmt-04.txt o rfc1036 (the email message format standard: From, to, date ...) Check also `son-of-1036.html' mentioned earlier. o rfc1153 Digest message format, 1990, Status: EXPERIMENTAL) o rfc1738 URL specification, mailto, http, consult rfc2396 which supersedes rfc1738. the wrapping has been de-recommended by popular demand. "define a single, generic syntax for all URI". See also rfc2369 "The Use of URLs as Meta-Syntax for Core Mail List Commands" o rfc1855 Netiquette Guidelines 1995 o rfc1991 PGP Message Exchange Formats o rfc2076 Common Internet Message Headers o rfc2045,6,7 MIME o rfc2111 Content-ID and Message-ID Uniform Resource Locators Also rfc1341 o rfc2142 Mailbox names for common services, roles and functions More Details o Common Internet Message Headers http://andrew2.andrew.cmu.edu/rfc/rfc2076.html 27.0 Introduction to E-mail Headers 27.1 To find out more about email (Resources) "All about Email headers" http://www.stopspam.org/email/headers/headers.html ...This document is intended to provide a comprehensive introduction to the behavior of email headers. It is primarily intended to help victims of unsolicited email ("email spam") attempting to determine the real source of the (generally forged) email that plagues them; it should also help in attempts to understand any other forged email. It may also be beneficial to readers interested in a general-purpose introduction to mail transfer on the Internet. [See also RFC pointers in the RFC section] "IMC -- Internet Mail Standards" http://www.imc.org/mail-standards.html "FAQ archive" http://www.faqs.org/faqs/ "RTFM ftp archive - Read the fine manual" ftp://rtfm.mit.edu/pub/usenet-by-hierarchy/comp/mail/ "Sendmail" ftp://rtfm.mit.edu/pub/usenet-by-group/comp.mail.misc/sendmail_FAQ "UNIX EMail Software" http://www.faqs.org/faqs/mail/setup/unix/part1/index.html ...This document is intended for system administrators who need to know how to set up their UNIX systems for email communication with the outside world...UUCP, Addresses, Domain Addresses, FQDN, NIC, MX record, Bang-Paths, Gateways, Routers, Smarthost, MIME, X.400, "The maps", Aliases "Plus addressing" http://www.faqs.org/faqs/mail/addressing/ "Understanding E-Mail Addresses, DNS, Gateways" http://www.uiuc.edu/uiucnet/3-2-1.html "The Unix MBOX, Berkeley, format" http://systems.binghamton.edu/Pine/low-level.html (--> Folder Formats and Name Extensions --> Berkeley Mail Format) http://www.qmail.org/qmail-manual-html/man5/mbox.html ...This format comes to us from the ancient UNIX mail program, V7 /bin/mail...Each message ends with two blank lines [1998-09-06 PM-L Dallman Ross ] I would have thought the connection to Berkeley was /usr/ucb/mail (a.k.a. "Mail," with a capital "M"); not /usr/bin/mail (a.k.a. "/bin/mail"). ("UCB" stands for "University of California, Berkeley.") The two are close, though different enough that I get messed up if I try to use /bin/mail for much. But "ancient UNIX mail program"? I use and prefer /usr/ucb/mail whenever I'm in a UNIX shell. Many others do, too. (I don't like pine. It feels too GUI.) Okay, sorry for the digression, but you all *were* talking about the RFCs and From_ lines. If it's called "Berkeley Mail Format," then I'd infer it comes from Berkeley Mail. "Listspec -- proposed standard from mailing list messages" http://www.within.com/~chandhok/ietf/listid.shtml http://www.ietf.org/internet-drafts/draft-chandhok-listid-03.txt Internet mailing lists have evolved into fairly sophisticated forums for group communication and collaboration; however, corresponding changes in the underlying infrastructure have lagged behind. Recent proposals like [LISTSPEC] and now [RFC2369] have expanded the functionality that the MUA can provide by providing more information in each message sent by the mailing list distribution software. In order to further automate (and make more accurate) the processing a software agent can do, there needs to be some unique identifier to use as an identifier for the mailing list. This identifier can be simply used for filter string matching, or it can be used in more sophisticated systems to uniquely identify messages as belonging to a particular mailing list independent of the particular host delivering the actual messages. This identifier can also act as a key into a database of mailing lists. "Literature" Dr. Bob's Painless Guide to the Internet : & Amazing Things You Can Do With E-Mail by Bob Rankin No Starch Press ISBN: 1886411093 List Price: $12.95 Netiquette by Virginia Shea Paperback 1 Ed edition (May 1994) Albion Books ISBN: 0963702513 Amazon.com Price: $19.95 The Elements of E-Mail Style : Communicate Effectively Via Electronic Mail by David Angell, Brent D. Heslop Addison-Wesley Pub Co (C) ISBN: 0201627094 Paperback - 157 pages (April 1994) List Price: $12.95 All About Internet Mail (Internet Workshop Series, No. 7) by Lee David Jaffe Library Solutions Inst & Pr ISBN: 188220820X Amazon.com Price: $34.00 3 Rs of E-Mail : Risks, Rights and Responsibilities by Diane B. Hartman, Karen S. Nantz Crisp Publications Inc. ISBN: 1560523786 Paperback - 153 pages (June 1996) List Price: $12.95 E-mail Companion; Communicating Effectively Via the Internet and Other Global Networks by John S. Quarterman, Smoot Carl-Mitchell Addison Wesley Pub Co ISBN: 0201406586 Paperback - 318 pages (November 1994) List Price: $19.95 The Internet Message : Closing the Book With Electronic Mail (out of print) by Marshall T. Rose Prentice Hall (Sd) ISBN: 0130929417 Managing Mailing Lists: Majordomo, LISTSERV, Listproc, and SmartList By Alan Schwartz O'Reilly & Assoc. 1st Edition March 1998 ISBN: 1-56592-259-X 298 pages, $29.95 http://www.oreilly.com/catalog/mailing/ sendmail, 2nd Edition By Bryan Costales & Eric Allman O'Reilly & Assoc. 2nd Edition January 1997 ISBN: 1-56592-222-0 1050 pages, $39.95 27.2 Lecture by Alan Stebbens There are two general classes of headers: those generated automatically by the MTA, and those configured and inserted by the MUA, on the user's behalf. The former, the ones generated by the MTAs, are used mostly for tracking the e-mail, and generally have nothing to do with the content of the email, much like those bar-code labels FedEx uses to track packages. The latter, the ones inserted by the MUA or by the user, are just like the shipping label the FedEx customer fills out, ie: they determine the source, the destination, and describe the content of the mail. It would be overburdensome for the user to generate all of these MUA headers themselves, so the user's mailer generates many or most of them automatically, typically under configuration control. Of course, the user can always override or replace the automatic MUA headers. The MTA headers, on the other hand, are almost completely automatic and the user almost never can change them. Only under special circumstances should the MTA headers be inserted or modified by the user. >From the user's perspective, however, the e-mail process seems atomic, so that the distinction of these header classes is lost. Even some systems managers or postmasters fail to appreciate that it is during different stages of the e-mail process, that different sets of headers get inserted. To help clarify this distinction, here's a diagram of the e-mail process and its several stages: sender -> MUA -> MTA ->..-> MTA -> MDA ->{maildrop}-> MUA -> reader [1] [2] [3] [4] [5] [6] Headers typically provided by "template" by the MUA to the sender, usually during stage [1] (when composing e-mail): From: # who I am To: # the target Cc: # people to keep informed, but need not respond Bcc: # secret admirers Subject: # what's the mail about Reply-To: # highest priority return address Priority: Precedence: Resent-To: # used for redirecting e-mail Resent-Cc: X-BlahBlah: # personalized headers When the sender is done composing, and says "send it" to his/her mailer, some additional headers may get inserted by the MUA at this stage [2]: Date: Resent-Date: # if being redirected From: # If not already present Sender: # if a From: is already present X-Mailer: # what MUA composed this message Mime-Version: Content-Type: # what kind of stuff is in here Content-Transfer-Encoding: Content-Length: When the MTA receives the e-mail from the MUA at stage [3], it may insert additional headers showing the origination of the e-mail: From # if local e-mail, automatic or by -f option Date # If not already present Message-Id: # unique ID for the e-mail; the first MTA # creates this Received: # shows inter-system e-mail tracking info Return-Path: # shows how to get back to the sender As each MTA hands off the e-mail, additional headers may get added, all as part of the MTA to MTA handoff in stage [3]: Received: # inserted by each MTA As the final MTA hands the e-mail to a delivery agent (MDA), in stage [4], there are still some more header insertions which may occur: Apparently-To: # added if no To: header exists From # may get added if local e-mail Some sites insert special rewrite rules and filtering to occur to support virtual domains, and these header changes will occur at stage [5], just before the incoming mail is dropped. Generally, though, no new headers are added, except possibly one to avoid loops: X-Loop: $USER@$HOST # inserted to avoid filtering loops Finally, at stage [6] when the reader views his/her e-mail, most MUAs will apply a filter to the stored mail causing selected headers to be omitted from the display. In a sense, then, this filtering "removes" the headers from the user's view (although no headers are actually removed by the MUA). The headers typically omitted are those inserted by the MTAs, and those having to do with the transport process and less with the contents. 27.3 Applied to received messages [alan] So, now that we have a common understanding... The first "From" is a Unix-mail `From_' header (note the space). This is inserted automatically by MTAs, unless one is already present and only then if it seems valid. The second `From:' is generated by the MUA (your personal mailer), either by configuration, or by the user. The rewrite rules in sendmail and most filtering programs concern themselves with the `From:', `To:', `Cc:', `Reply-To:' headers. I'll assume that if "From smmi" is not "correct", then you must be trying to hide the delivery process, and implementing something of a virtual domain. In general, it is a bad idea to "correct" the automatic mail headers inserted by the MTAs. This is a different matter than changing addresses to show virtual domains. The `From_' header is part of the history of the message, showing how the mail was originated. Similarly, the "Received:" headers should not be messed with. Changing the history of an e-mail message will make it very difficult to diagnose e-mail delivery errors. That being said, and, since I also believe in the freedom of choice, I will now supply you with "enough rope to hang yourself" :^) There are two places where you can have the `From_' header corrected: just before it gets dropped into the mailbox (for incoming e-mail), or as it gets submitted to the MTA (for outgoing e-mail). Changing the `From_' before it gets dropped is easy. Just use a recipe like this: FROM = `$FORMAIL -zxFrom:` DATE = ...construct the RFC date format :0 fhw | $FORMAIL -I "From $FROM $DATE" The `From_' header is created automatically by the MTA (sendmail) when it receives a piece of mail. If the mail is sent through sendmail without using the '-f' option, then sendmail sets the default `From_' to that of the current user. If you are not root, or a "trusted user" (see the sendmail man page), then sendmail will ignore the `From_' header and either remove it altogether or replace it. Even if you are root, sendmail will replace the `From_', if the e-mail is being received locally (as opposed to from the network). If you wish to change the `From_', you must invoke sendmail, as root or a "trusted user", and use the "-f" option. EG: to set the `From_' to match the `From:' header, use the following recipe, as root: :0 h FROM=|$FORMAIL -zxFrom: :0 ! -oi -t -f"$FROM" Please read the man page on sendmail, noting the use of '-f'. 27.4 Bcc lecture by Alan Stebbens Procmail most typically processes incoming email at a destination site; the BCC formatting (or lack of it) is done on outgoing email, at the originating site. For this discussion, let's make distinctions as to the kinds of mail there are: (a) incoming mail, and (b) outgoing mail. Bcc's are inserted into outgoing mail by the user, and the message is then handed to a MUA. The MUA may then handle the BCC's or defer that to the Mail Transport Agent (MTA), such as sendmail. Whichever agent performs the Bcc function, that function is performed in at least three different ways: o Many MUAs format outgoing mail without the Bcc: headers, so that the same message header can be sent to all recipients. The Bcc: recipients receive an extra line in the message body, indicating the nature of the mail. The text of the message varies from MUA to MUA; The Rand Mailer, MH, for example inserts the lines around the original text: ------- Blind-Carbon-Copy ... ------- End of Blind-Carbon-Copy o Some MUAs will send the message, separately, to each Bcc: recipient, with the recipient address on the Bcc: header. Each Bcc recipient thus knows that they received the message by way of the Bcc, but do not know whom else was a Bcc recipient. All Bcc recipients are private, even to other Bcc recipients. (It would be nice if all MUAs behaved this way). o A few MUAs deliver the message without the Bcc:, but also without any special indication; you must guess that it was a Bcc. The original email standard RFC822 says this about Bcc: 4.5.3. BCC / RESENT-BCC This field contains the identity of additional recipients of the message. The contents of this field are not included in copies of the message sent to the primary and secondary recipients. Some systems may choose to include the text of the "Bcc" field only in the author(s)'s copy, while others may also include it in the text sent to all those indicated in the "Bcc" list. So, procmail *would* handle Bcc's correctly if the sender's MUA included the Bcc in the header in the first place. But, since procmail is most typically used on *incoming* email, it will never have a chance to deal with Bcc: headers. 27.5 Bcc lecture by Philip Guenther The Bcc: header should in general not appear in an incoming message (if procmail is used for processing outgoing mail it may occur there). Most (?) Mail User Agents will send a bcc by just removing the header entirely and putting the address in the envelope recipient list with the other recipients from the To: and Cc: headers. Done this way, the address to which the message was bcc'ed *does not occur in the headers at all*, and you are SOL. By the time procmail is run (in the standard installation), the envelope is lost, which is the only way you would be able to process Bcc's with any possible regularity, and even that's suspect as if an alias at another site that contains your address is bcc'ed, then the envelope, by the time it reaches you site, will only contain your (local) address. Furthermore, the whole point of the Bcc: header is that the people who receive the message do not know the entire list of address to which the message was sent. If an alias is bcc'ed, it is not clear whether the members of the alias should know that it was the alias that was bcc'ed and not just the individual in question alone. There MUST be some trace of the BCC destination that travels with the e-mail. Otherwise, how does it know its destination? If I'm right, then couldn't procmail use this to properly handle the message? [alan] Only the MTA knows the destination address because it is part of the "envelope", the information which is passed on the "RCPT To: some-user" SMTP line. This information is how the MTA knows to deliver the mail, and not by the contents of the headers. Of course, when invoked properly, many MTAs can read the headers to obtain the addresses needed on subsequent "RCPT" commands in the ensuing SMTP connections. In fact, the Bcc: header can be read along with the rest of the destination headers to obtain the recipient addresses, but the Bcc: will also be removed from the headers. The address by which an MTA receives a mail is known as the "envelope address", which may be distinct from any headers in the message itself, or, the same as one of them, for directly addressed mail. With mailing lists, for example, the addressee will never see his/her own address, but will see the mailing list in the To: or Cc: header fields. Even here, when mail is addressed to more than one mailing list, there is a lack of standard for determining *the* address by which a message is received. There are lots of conventions followed, and heuristics, but no clearly defined standard to indicate the cause of delivery. You may be able to configure your MTA to pass along the envelope in a new header, or pass it by argument to the local delivery program (which can be procmail). It is then up to the local delivery program to use (or not) the envelope address information. If you wish to understand the limits of your mail system, you should read RFC822 (email formatting standards) and RFC821, which describes the original language of SMTP. There are several extensions in progress, but the basic commands of "MAIL", "RCPT", and "DATA" should suffice. 28.0 Message headers 28.1 What is correct From address syntax Case 1 is what is in RFC 822, as I recall. I regard Case 2 as "screen syntax" for inclusion in plain-text message-body contexts. It could be used for the interactive presentation of headers, but I would be inclined to think any tool that doesn't accept the original RFC-822 form is broken. 1. login@path.to.host (Personal Name) 2. Personal Name [1998-05-31 FAQ-L Simon Lyall ] Both forms are legit but the way news and standards documents are going is for the first form to be discouraged. This effectively means that software should accept both forms but only generate the second (this is when the article is first created not by someone half way around the world). The problem with the first form is that stuff in brackets is actually a "comment" rather than the name of the poster. This means that there is no way using the first form to actually say what your name is, it is just that most people say their name in the comment field. They could just as easily say something else. This means that software that displays the comment field as th name is just taking a guess. The 2nd format puts the name of the posted in a definite place that software can work with and allows you to leave the use of brackets for comments. The current internet draft that on this that will most likely replace RFC 822 on this point is at: ftp://ftp.ietf.org/internet-drafts/draft-ietf-drums-msg-fmt-04.txt The bit is section 3.4 which says: Note: Some legacy implementations used the simple form where the addr-spec appears without the angle brackets, but included the name of the recipient in parentheses as a comment following the addr-spec. Since the meaning of the information in a comment is unspecified, implementations SHOULD use the full name-addr form of the mailbox if a name of the recipient is being used instead of the legacy form. Also, because some legacy implementations interpret the comment, comments SHOULD NOT generally be used in address fields to avoid confusion. 28.2 What's that X-UIDL header? [philip] o It's not standardized, and will never be standardized by an RFC. (No X- header can be) o Some servers use this to store information for the UIDL command. o Some clients apparently store UIDL information in this header in the locally downloaded copy. (Note: the POP3 protocol doesn't let the client modify the message(s) stored on the server.) o Some spamming software packages include this header in messages they send to make some POP3 clients that support client side filtering think that they've already filtered the message. o Filtering out incoming messages (pre-retrieval via POP3) seems 'fairly' safe, though some legitimate mail may include this header. Using it as a heavy weight (but not enough on its own) in a procmail scoring recipe that detects spam appears to be reasonable. o [philip] If a message comes into your mailbox that has the X-UIDL: header, and doesn't have your address in the header, then I would have strong doubts about its legitimacy. o [ed] comments: E-mails with X-UIDL: headers are almost definitely spam unless they've been Resent-To: me by someone. Also, valid X-UIDL: headers have 32 hexadecimal digits exactly. [David] The advisability of trashing all mail with X-UIDL: headers has been discussed on procmail list recently; apparently it's possible for one to appear in legitimate mail. [Elijah] Yup. Very true. Mostly likely case would probably be for certain types of forwarded mail, including some moderated mailing lists. Fluffy's mod.* list had these until I pointed out the wide-spread file-to-/dev/null problem to Fluffy. 28.3 What is that first From_ header? [philip] the address on the `From_' line is the envelope sender. If the message has a Return-Path: header, then it would probably be easier to use that instead, as then you don't have to deal with the date as found at the end of the `From_' header. DON'T CONFUSE THE ENVELOPE WITH THE MESSAGE. The headers in the message are allowed to contain a list of address in the To: and Cc: headers that are totally irrelevant to where the message it going. For example, a message from a mailing list may simply say "To: procmail@Informatik.RWTH-Aachen.DE", with no visible sign that "guenther@gac.edu" is an address to which the message is being delivered. That information, where the message is currently in the process of being delivered to, is found ONLY in the envelope. Okay, where is this precious envelope? In SMTP the envelope consists of the MAIL FROM: and RCPT TO: SMTP commands. However, when a message is given to the local mailer, this information is typically lost. Well, the envelope sender is usually saved now days in the Return-Path: header, but the envelope recipient usually only appears in the form of the login name that the local mailer was passed on the command line. This can be used, for example, by /etc/procmailrc scripts that check $LOGNAME to see where the message is set to go. A problem arises however when people start creating virtual domains. When sendmail does the aliasing (usually by mailertable I believe?), it totally loses the original envelope recipient address in the rewriting. All the addresses get rewritten to the same thing, and sendmail thus has no reason to differentiate them. Having lost their independent identities, the now-same multiple recipients are merged to form one call to the local mailer. The key point here is that once the envelope recipient is lost by the virtual domain alias, THERE IS NO WAY TO GET IT BACK! You can wave your hands and try faking it, but no one in the virtual domain can ever get onto a mailing list or otherwise receive a piece of mail for which the header doesn't explicitly contain his/her email address. And furthermore, even doing that faking is extremely difficult to do right. What I show below does NOT correctly handle messages with Resent-* headers. This can result in messages being received by people who shouldn't receive them, possibly violating someone's privacy. Please keep all that in mind if you decide to use it. It handles a goodly percentage of the cases, but it'll bite you badly at some point in the future. So you may ask, does this mean that virtual domains are hopeless? The answer is no, you just have to be very careful in the sendmail.cf to keep the envelope recipient stashed somewhere long enough that it can be passed as an argument to the local mailer, usually by putting it in the 'host' part of the mailer triple, though with sendmail 8.7.x, putting it into the local part with a '+' would probably be incredibly clean. In the end, it ends up being passed to procmail (standard /bin/mail has no way of handling this, but we already knew that) as another argument (i.e., -a orig-envelope-recip), though with some work it might be possible to do it via a new header, but that's uglier and no more efficient. I don't have the sendmail.cf (or m4 .mc) mods necessary to do this, but if you post to comp.mail.sendmail (after checking the FAQ, I think it might be there) someone may be able to give you further pointers on saving envelope recipients in virtual domain situations. 28.4 Message-Id header ...Are there known problems with "valid" mails with illegal MessageIDs? For some strange reason, some people are sending out email with bad message id's. That wouldn't be much of a problem, except that our MITS department won't even consider fixing the bad-message-id unless it causes a problem somewhere else. Why would they not consider fixing it? Their e-mail software/gateway is broken, and needs fixing. That's that. Direct them to RFC 822, sec 4.6.1. http://ds.internic.net/rfc/rfc822.txt [Gerald Oskoboiny ] There are problems with Some of the problems with mail containing a bad message id Some people (myself included) run filters to automatically delete incoming e-mail if its message-ID has been seen recently, or if it looks bogus. Some mailing list software (including Smartlist) does not accept e-mail with a message-ID that has been seen recently. Each message must have a unique message-ID. The best way to ensure that msgids are unique in a global context is to include a fully-qualified domain name after the '@'. In particular, a message-ID like <3.0.5.32.19971208192547.007db100@mailhub > is unacceptable for this reason (even if it didn't have a space at the end.) Some mail archive software (including some that I wrote) uses message-IDs as a unique identifier for that message in the archive. It may reject messages that appear to be duplicates because they have a message-ID used by other messages. (as my software does.) [generating message id] [Stainless Steel Rat 1998-03-13 in Emacs Gnus mailing list] ...it is strongly recommended that `Message-Id' strings be generated by the MUA, rather than the MTA. The reason being that a mail hub could be processing several messages at the same time (multiple CPUs), and so could accidentally generate duplicate `Message-Id' strings. The MTA should generate `Message-Id' headers only when the MUA is stupid and fails to do it. [phil 1998-03-19 PM-L] ... let's do a quick work-up of a 'more complete' regexp to match `Message-Id's. I'll take syntax lines from rfc822 with regexps that should match them. For ease of presentation, I'm going to work from the bottom up. Note: any brackets that only contain whitespace should really contain a space and a tab. dq = '"' # (literal) double-quote bw = "\\" # (literal) backwhack ws = "[ ]*" # whitespace atom = "[-!#-'*+/-9=?A-Z^-~]+" word = "($atom|$dq([^$dq\]|$bw.)*$dq)' local_part = "$word($ws\.$ws$word)*" domain = "(\[$ws([^][\]|$bw.)*$ws\]|$atom($ws\.$ws$atom)*)" :0 *$ ! ^Message-Id:$ws<$ws$local_part$ws@$ws$domain$ws> { ...Catched illegal message id } ...I did start logging ids that match that condition. It matched two messages so far. One message-id was clearly bogus, but here's the other one (mailing list with 1 msg/week, no spam): Message-Id: <199803251729.LAA10847@wuarchive.wustl.edu.> Is your regexp incomplete wrt trailing dot in the domain part, or is the MUA/MTA broken? [philip] rfc822 doesn't allow a trailing dot. I just looked at the draft of the new Internet Message Header Standard (the eventual replacement for rfc822) and it doesn't either. Rather, it further restricts the syntax of generated `Message-Id' headers to disallow comments or folding whitespace from occuring in the message-id itself. *however*: before you go tightening that regexp, note that the standard *requires* that programs that process messages *must* accept and parse messages that fit the obsolete syntax. This is because old mail messages can hang around for long periods of time in a way that most other internet data formats don't see. The new requirements are on the _generation_ of new messages, not on old messages. [1998-10-22 comp.emacs Toby Speight ] It's more usual (and useful) to refer to news articles by Message-ID (that's what Message-IDs are for!). In this case If you are so attached to DejaNews: (though for some reason this returns text/plain for something which is clearly a message/rfc822). Either of which is an unambiguous URL, not subject to the same time-dependent changes. URLs were designed exactly to remove the need for such descriptions. 28.5 Received header ...Found another interesting pattern, Received header that are all on one line. Normally a Received: header spans two lines, at least on *all* the mail I get. This filter locates the single line Received: headers and traps on that: :0: *Received:\/( ?[^ ])*$ mail/Spam [Christopher Lindsey ] No guarantees here. I just tried it out on some test mailboxes (all known to have valid mail), and it matched like mad. As far as I can tell, there's no requirement in RFC 822 for multiple lines in a `Received' header. [Reto Lichtensteiger ] The one line header vs. multi-line header is config'ed in sendmail: An older cf file (V8.7): HReceived: $?sfrom $s $.$?_($?s$|from $.$_) \ $.by $j ($v/$Z)$?r with $r$. id $i$?u for $u$.; $b A later (V8.8) one: HReceived: $?sfrom $s $.$?_($?s$|from $.$_) $.by $j ($v/$Z)$?r with $r$. id $i$?u for $u; $|; $.$b 28.6 Return-Path ...I've created a user (lo_mailer) with a .forward and a .procmailrc file to transport incoming mail to the right user. That is working fine, but the Return-Path: Line is set to the local procmail user (lo_mailer) and does not contain the original Return-Path! What can I do to win back the original-line? Please help me :) [david] Normally when you forward mail you should NOT keep the original return path. If the forwarding destination is invalid or unreachable, mail has to be returned to the forwarder, who can fix the forwarding routine, not to the original sender, who can't do anything about it and probably never even heard of the final destination address. But, though you should change the return path, you do not have to lose the information that the original return path contained. You can safely put that into the body or into another header line. Try this in lo_mailer's .procmailrc: :0fwh # if there's a return path, save it as Old-Return-Path: * ^Return-Path:.*<.+> | formail -iReturn-Path: # lower-case i :0Efwh # if there's no return path but there is a From_, use that * ^^From[ ]+\/[^ ]+ | formail -A "Old-Return-Path: <$MATCH>" :0Efwh # if there was neither a Return-Path: nor a From_ | formail -A "Old-Return-Path: unknown" The first set of brackets in the condition line of the second recipe enclose a space and a tab; the second set enclose caret, space, tab. On the forwarding leg from lo_mailer to the final recipient, the return path will be to lo_mailer, as it should, but if the final recipient wants to know where it originated, he or she can look at the `Old-Return-Path' header. There is one caution here. If lo_mailer is taking mail to a general response address and distributing it to specific people based on subject or body content or just by rotation to balance the workload, fine. But if you have a personal domain and your ISP is routing all mail for any address in your domain to your account on the ISP, and you're depending on procmail to deliver it to the right address in your own domain by reading To: or Cc: headers, that is the wrong approach. The correct recipient will be on the envelope, which is removed from incoming mail before procmail can see it. Your ISP has to do something that lets you know the true envelope recipient or recipients of a message, and others here know a lot more about that than I do (and way, way more than I could tell you without making mistakes). [1998-11-11 Gnus-L Karl Kleinpaste ] With regard to the standards for Return-Path, RFC822 observes that it should be a _route_ back to the originator, i.e., it should show relay hops; RFC1123 in turn says that failure notifications should be sent back to the originator with the route information deleted, that is, "If the address is an explicit source route, it SHOULD be stripped down to its final hop." ??? Then what's the point of providing the source route in the first place? It seems to me that Return-Path's value has become very limited in an environment where source-routed mail is vastly deprecated, and just plain not supported by many. I know that, when I did serious sendmail work years ago, I shot all source routes on sight. You could very well substitute the use of user-login-name for the "-f" argument in sendmail with the value user-mail-address; the result should give the effect you need, and not create any interoperability problems -- mail will still show a proper way to return to you. That said, this mailing list's requirement of matching Return-Path is indeed pretty peculiar. 28.7 Errors-To 1) Can somebody confirm that Errors-To: is deprecated? 2) Is there an RFC for this? [1998-09-15 Liviu Daia ] 1) It is an UUCP thing, and it's indeed deprecated. Here's the relevant quote from sendmail's manual. 2) Probably not, since UUCP-related RFCs haven't been updated in a while. If errors occur anywhere during processing, this header will cause error messages to go to the listed addresses. This is intended for mailing lists. The Errors-To: header is officially deprecated and will go away in a future release. 28.8 X-Subscription-Info This is a header that is used by some mailing lists: it contains an email address for un/subscribe, or a URL with said info. Imagine the reduction in bozo messages asking how to unsubscribe from mailing lists. If your mailing list doesn't have it already, make a suggestion to the list's maintainer. 28.9 Reply-To header The existence of a Reply-To: means, "IF you reply to me, send it to this address instead of the one in the From: header." In the case of a mailing list, the list usually is that default mailbox. In that case, a Reply-To header says, "don't send it to the list, send it here instead." Again, it is more a matter of "do what I mean". "ListAdmin: Don't play with Reply-To" http://www.unicom.com/pw/reply-to-harmful.html ... RFC-822 on reply-to is just almost hopeless. The reason people do what they do is more likely because they saw someone else doing that, and imagined it was correct, and copied - perhaps slightly varying things along the way. ...If you use a reasonable mailer, Reply-To munging does not provide any new functionality. It, in fact, decreases functionality. Reply-To munging destroys the reply-to-author. capability. "Reply problems" http://www.cs.utk.edu/~moore/reply-problem-list.txt "Mail-Followup-To" ftp://koobera.math.uic.edu/www/proto/replyto.html ...there are useful things that can be done with these headers. For instance -- on mailing lists where everyone that posts is assumed to be subscribed (like this one), the listserv could add a "Mail-Followup-To: ding@gnus.org" header. It can also be used by the sender as a way to signal "I am subscribed to the list; don't Cc me or anybody else". [Mail-Followup-To problems] Keith Moore Wed, 11 Feb 1998 14:20:25 -0500 commented on the nmh list. Keith is the IETF applications area director, and used to chair the DRUMS working group. Please don't implement support for Mail-Reply-To and Mail-Followup-To in nmh. Not only are they nonstandard, they're a poor fix for the problem. Reply-To is widely misinterpreted as the replacement for the From field in replies, in such a way that "reply all" goes to Reply-To + To + Cc if Reply-To is present and From + To + CC if no Reply-to field is present. RFC 822 has language that appears to support this view. But a careful reading of RFC 822 reveals that this prose does not apply to Reply-To with respect to a "reply all" function, but only with the use of Reply-To in a "reply to author" function. This leaves us with the situation where the author of a message is unable to specify the complete destination for replies. Even if the author specifies a Reply-To field, if the recipient uses "reply all", addresses from the To and CC field are still included. This is the behavior implemented by almost every UA in existence, but it's almost always the wrong thing to do. And RFC 822's examples make it clear that Reply-To is intended as the *complete* destination for replies, not merely a replacement for the From field. The right way to fix this is to correctly interpret Reply-To - not as simply the replacement for the From field in replies, but as the reply destination preferred by the author of the subject message. Adding new headers doesn't fix the problem. It only makes the situation more complex. Dan's proposal is intrinsically flawed. It incorrectly assumes that the sender can reasonably anticipate the recipient's needs in replying to the message, and that such needs can reasonably be lumped into either "reply" or "followup". It doesn't solve the real problem, which is that responders need to think about where their replies go. Mail-Followup-To won't decrease the number of messages that go to the wrong place. If I sent out a message inviting people to a meeting, and want "normal" replies (presumably accepting or declining the invitation) to go to my secretary. Should I put my secretary's address in "Mail-Reply-To" or "Mail-Followup-To"? Say I put it in Mail-Reply-To and a responder wants to send a personal reply to me, perhaps because it's sensitive in nature. So he hits "reply to author" thinking that the message will go to me. Instead, the message goes to my secretary. This is Bad. Say I put my secretary's address in Mail-Followup-To and a responder wants to send a message to the list of recipients of the original message -- maybe that responder wants to let everyone know about cheap airfares to the meeting. So the responder hits "reply to everyone" thinking that the message will go to everyone. Instead, the message goes to my secretary. This is not as bad as the other case, but it's still not desirable. So if some responses are neither "personal" nor "group" replies, why not define an extensible reply header that would include not only the address but the category of reply? Something like: Labelled-Reply-To: secretary; jeeves@cs.utk.edu Labelled-Reply-To: mailing-list; listname@foo.com It turns out that we already have most of this in RFC 822: o The 'phrase' before an address, or a comment, can identify a person by name and/or role. The responder can use this information to decide whether it's reasonable to send a reply to that person. e.g. Reply-To: (my secretary) o Similarly, the 'phrase' after a group name can identify a group of recipients, which can also be used by the responder. e.g. Reply-To: Secretary: jeeves@cs.utk.edu ;, The Gang: a@foo, b@bar, c@zot ; (Unfortunately, phrases are so widely botched, that they probably aren't usable for this.) Summary: o The way to solve most reply problems is to encourage the responder to actually think about where the message needs to go, and make it easy for him to get the behavior he wants. (It also helps if people use the RFC 822 'phrase' to label their header addresses.) o We can build interfaces that help the responder do this without defining any new header fields. o Except for a very few cases, Mail-{Reply,Followup}-To doesn't help. It only provides more opportunities for surprising behavior. Stainless Steel Rat 1998-02-12 commented in Emacs ding mailing list Every mail client is not doing supporting this. Only the badly written ones fail to distinguish between replies and followups. When you get right down to it, this proposed standard has two goals: . To make broken MUAs act less brokenly. Well, broken MUAs are not going to implement this standard, anyway; good MUAs do not need it as they already make the distinction between replies and followups. . To make broken mailing lists act less brokenly. Administrators of broken mailing lists have decided that they like it that way. They claim that it makes it easier for their lists' subscribers to reply to the list. The subscribers that "need" list-bound Reply-To headers are using broken MUAs. See #1. This proposed standard will not solve any of the problems it attempts to address. It creates headers that are ignored by bad MUAs and are redundant for good MUAs. To summarise Keith's statement: From is the originator's mailbox. It is not an 'account'. RFC 822 states that the originator header should contain the correct default reply address. This is the scenario that the proponents of these headers have proposed, and the flaw the IETF has found with it. Joe is subscribed to a mailing list that he reads from his "private" mail account. For whatever reason, Joe posts a message to that list from work, so his work mailbox is in the From header. Joe does not want to override where responses go with a Reply-To header, but he wants personal replies to go to his private mail account instead of his work account. The flaw the IETF found is that Joe is equating his two mailboxes with his private and work accounts. There is no such correspondence as far as RFC 822 is concerned. If Joe is acting in a "private" fashion, the system he is using is irrelevant; his private mailbox belongs in the From header and he should put that mailbox there when he originates the message, regardless of where he physically is when he does so. 28.10 Mail-Copies-To header [Suggested by Lars, the Author of Emacs Gnus] ...Mail-Copies-To: is a header line used in messages on Usenet to direct copies by email of followups to posts. http://www.math.fu-berlin.de/~guckes/rfc/mail-copies-to.html [SL Baur ] The `Mail-Copies-To:' header should control how your email (and Usenet) client prepares a followup message. It gives control to the sender of a message whether `courtesy' duplicate copies of messages should be sent. There are two forms: Mail-Copies-To: never Do not automatically include the sender of the message being responded to. There are two canonical examples. Usenet: From: foo@foo.bar Newsgroups: comp.emacs.xemacs Mail-Copies-To: never A followup in a conforming client should generate in the response message headers: Newsgroups: comp.emacs.xemacs Email: From: foo@foo.bar To: mailing-list@somewhere.com Cc: luser@somewhereelse.com Mail-Copies-To: never A followup in a conforming client should generate in the response message headers: To: mailing-list@somewhere.com Cc: luser@somewhereelse.com The second form includes a properly formed RFC822 email address as the parameter: Mail-Copies-To: someaddress@somewhere.com In this case, the sender of the message is specifically requesting that responses to the message not only go to the main forum (either mailing list or Usenet newsgroup), but a duplicate copy should also be sent to `someaddress@somewhere.com'. There are (again) two canonical examples. Usenet: From: foo@foo.bar Newsgroups: comp.emacs.xemacs Mail-Copies-To: foo@foo.bar A followup in a conforming client should generate in the response message headers: Newsgroups: comp.emacs.xemacs Cc: foo@foo.bar[1] Email: From: foo@foo.bar To: mailing-list@somewhere.com Cc: luser@somewhereelse.com Mail-Copies-To: foo@foo.bar A followup in a conforming client should generate in the response message headers: To: mailing-list@somewhere.com Cc: luser@somewhereelse.com, foo@foo.bar[2] There is no requirement that the address in `Mail-Copies-To' match the `From' address. Footnotes: [1] Or `To: foo@foo.bar' [2] It is also acceptable to put `foo@foo.bar' in the To: line. 28.11 Mail-Followup-To and Reply-To-Personal headers [21 Nov 1997, Mutt Development List comp.mail.headers] ...I'm not saying that the BSD Mailbox format is good. Just that the Content-Length variant of that format is worse. Ok, so someone took the From_ format, and extended it to not require mangling by adding a length indicator to the format. At first glance, this may sound simple and elegant, but it breaks the world, and one shouldn't encourage its use to spread. The thing that breaks is taking an existing, widely-implemented format, and adding a requirement that it have a length indicator. This means that any existing software that already thinks it knows how to manipulate that format is going to damage the file (any change to the data will cause the length indicator to be wrong with respect to the new specification but not with respect to the old specification.) If the content-length-based format was not otherwise- indistinguishable from the ``From '' format, there wouldn't be a problem; the old software would simply fail to work with this new file format, instead of ``corrupting'' the documents (in quotes, because it's really just a matter of which spec you're following.) Also, mailboxes are by their nature a textual format; but, the content-length header measures in bytes rather than lines. This means that if you move the file to a system which has a different end-of-line representation (Windows <=> Mac, or Windows <=> Unix) then the content-lengths will suddenly be wrong, because the linebreaks now take two bytes instead of one, or vice versa. It's impossible for a mail client to look at a file, and tell which of the two formats (From_ or Content-Length) it is in; they are programmatically indistinguishable. The presence of a Content-Length header is not enough, because suppose you were on a system which knew nothing at all about that header, and some incoming message just happened to have that header in it. Then that header would end up in your mailbox (because nobody would have known to remove or recalculate it), and it would possibly be incorrect. (Presume further that the header was not just incorrect, but intentionally malicious...) Stricter parsing of the ``From '' separator line doesn't help either, because there are many, many variations on what goes in that line (since it was never standardized either); and also, some mail readers include that line verbatim when forwarding messages (Sun's MailTool, for example) so a stricter parser wouldn't help that case at all, because message bodies tend to contain valid matches. Some mail readers attempt to cope with this by recognizing the case where the Content-Length is not obviously spot-on-target, and then searching forward and backward for the nearest message delimiter; but this is obviously not foolproof, and makes one's parser much more inefficient (requiring arbitrary lookahead and backtracking.) Conventional wisdom is, ``if you believe the Content-Length header, I've got a bridge to sell you.'' 28.13 Moral about CC copies in usenet Sending CC There has been very heated discussion in the gnu.emacs.gnus (eg. around 1999-03-20) newsgroup where many people argue for sending CC replies to the person thet posted the question to the newsgroup. The benefit of sending CC has been seen as: o The person gets fast answer. o The person may not read the newsgroup regularly and appreciates the private answer o The newfeed for him may not be very reliable, so the answer may not appear fast in the group (but we don't know this for sure) o The newgroup expiry period may be too fast for him to catch the reply (but we don't know this for sure). In recent years the netnews has changed a lot and many people have started using non-existing email address in order to prevent getting UBE mail. This has made the "CC" senders annoyed, because they get bounced mail from these non-existing addresses. Not sending CC Usenet is considered a public forum, which does not force anyone to reveal their "real" address if they don't want to. It's the same as lock in their doors. Some people don't want to see non-invited people in their doors and that's why they don't like CC messages too: o The CC is superfluous: The answer has already posted to newsgroup o a CC won't help following a thread. Person has to visit the newsgroup to see the whole discussion anyway. o A CC is subjected to mail delivery problems: Person has moved, mail delivery problem (keep trying for N days), transient failure.. o He always wants to read the newsgroup and doesn't like CC copies to fill in his mailbox in expensive ISP account. A Clear munged address An clear non-existing email address that indicates that it is not the real destination is usually considered good manners: john.doe@nowhere.net b.gates@vatikan dummy@no-replies.com Or partially modified, that a human mind can "decode" if a direct contact is wanted (but somewhat hard to programs, because there are more creative choices that what program can ever expect to see): johnx.you-know-what-todo@not-here.skynet.com door.lock.mike@chevanix.com nospam.xavier@ube-stop.aol.net A valid looking address But an address that looks like a "real", but is bogus, is not a polite way to participate in usenet. This address wold give an impression that persn is really there: mike@future-domain.com The MORAL learned about automatic CC copies is: An automatic CC is a bad thing. Don't guess people's minds. An open email (real email addresss) is not an invitation to visit his door. It is only a hint where the message comes from (valid or not). The only thing we can be sure of is that a A clear anti-UBE address is a stop sign, not to send any CC copies. When people want CC, they indicate it by saying it in mail or adding some header that can hopefully be understood by newsreaders, like `Mail-Copies-To' or `Followup'. 29.0 Other interesting code 29.1 Misc email related pointers "ProcLog" http://www.best.com/~aturner/proclog/ Aaron Turner ...ProcLog is a set of Unix shell and Perl 5 scripts that provide an easy to use and fast reporting tool for detailing where mail goes after Procmail sorts it. ProcLog reports on current email in your Procmail Log file, any new email that has come in since ProcLog was last run, and the size of your Procmail log file. What makes ProcLog unique is its ability to help you keep track of email you've read. "Xbuffy -- biff log" http://www.fiction.net/blong/programs/#xbuffy 29.2 Expire mail pointers "Perl mail expire" http://www.oasis.leo.org/perl/scripts/net/mail/expire_mail.dsc.html Phil Male ...This program removes old messages from system mailboxes. It assumes the format of mailboxes to be standard sendmail format mail with a blank line followed by a `From ' line starting each and every message. Mailbox locking is via flock. Works under SunOS. "Sh expire mail" This script will delete messages older than $AGE days from the mailbox specified on the command line. It requires that you have formail installed on your system, and if formail is in a directory other than /usr/bin, you must change the value of $FORMAIL. "Gawk expire mail" by Roman Czyborra ...Using GNU version 2.15 of awk: This filter deletes all messages older than expire days from a Unix mailbox. Sample call: gawk -f expire.awk expire=21 box > new && mv new box [See old procmail archive, BestOfProcmail] "pick -- Auto deleting old messages" [Brian Dockter ] ...Once the messages were in the correct folder, I would suggest using cron and mush. mush is able to manipulate messages on a wide variety of criteria, but works with them once they are already in the folder. Here is a command which would delete all messages that are one week old or more: pick -ago -1w | delete IMHO, with procmail to do the pre-processing, and mush to do the post-processing, I have an unbeatable mail combination. 29.3 Usenet News related pointers "Perl Get News (perl4)" ftp://pittige-tijden.ml.org/pub/procmail/pgnews.gz 29.4 Code: Perl Extract procmail man pages from 3.11pre7.tar.gz Contact: for code. Procmail-3.11pre7.tar.gz has some .man files that can't be used right away. You have to run the whole make process before you can get the ready man pages. However, this small perl script takes care of only creating the man pages if that is the only thing you want to grab from the tgz kit. Be in the procmail tar.gz kit's "man" directory and run this script with command below and the *.1 pages will appear in the directory. % pm-man.pl *.man 29.5 Code: Sh remove matching lines from file [era] The name "gred" is rather obscure if you don't know what "grep" stands for. Anyway, this is also really too specialized a script to get such a general-sounding name. Incidentally, I timed this against a Perl one-liner on my /usr/dict/words (which is rather small, though; some 25,000 lines) and found the shell version to be quicker, even with the locking. A good citizen would take care to remove the temp files when done, but since Wotan thought it would be valuable to keep them around for backup, I left implementing that as an exercise. (Hint: they should be cleaned up even if the script is interrupted with ctrl-C.) #!/bin/sh # gred -- like grep, but remove matching lines # syntax: gred regex file # locks file while gredding using dotlocking # case "$#" in 2) ;; *) echo "Syntax: gred regex file" >&2 ; exit 1 ;; esac LOCK="$2.lock" TMP=/tmp/$$.temp if lockfile "$LOCK"; then mv "$2" "$TMP" grep -v "$1" "$TMP" >"$2" rm -f "$LOCK" fi # # end of file End