When given one of the non-toolkit options, xvidtune provides a command line interface to either switch the video mode.
Without any options (or with only toolkit options) it presents the user with various buttons and sliders that can be used to interactively adjust existing video modes. It will also print the settings in a format suitable for inclusion in an XF86Config file.
Normally the XFree86 X servers only allow changes to be made with the XFree86-VidModeExtension from clients connected via a local connection type.
Note: The original mode settings can be restored by pressing the `R' key, and this can be used to restore a stable screen in situations where the screen becomes unreadable.
The available buttons are:
Left Right Up Down
Adjust the video mode so that the display will be moved in the appropriate direction.
Wider Narrower Shorter Taller
Adjust the video mode so that the display size is altered appropriately.
For some S3-based cards (964 and 968) the following are also available:
Set the blank delay values. This affects screen wrapping. Acceptable values are in the range 0-7. The values may be incremented or decremented with the `+' and `-' buttons, or by pressing the `+' or `-' keys in the text field.
For S3-864/868 based cards InvertVCLK and BlankDelay1 may be useful. For S3 Trio32/Trio64 cards only InvertVCLK is available. At the moment there are no default settings available for these chips in the video mode extension and thus this feature is disabled in xvidtune. It can be enabled by setting any of the optional S3 commands in the screen section of XF86Config, e.g. using
blank_delay "*" 0
Table of Contents