Network Working Group R. Hedberg Request for Comments: 2378 Umea University Category: Informational P. Pomes QUALCOMM, Inc. September 1998 The CCSO Nameserver (Ph) Architecture Status of this Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (1998). All Rights Reserved. Abstract The Ph Nameserver from the Computing and Communications Services Office (CCSO), University of Illinois at Urbana-Champaign has for some time now been used by several organizations as their choice of publicly available database for information about people as well as other things. This document provides a formal definition of the client-server protocol. The Ph service as specified in this document is built around an information model, a client command language and the server responses. 1. Overview 1.1. Basic Information Model At its simplest the Ph database can be thought of as a computer- resident "phone book". However, it can be used to collect arbitrary information about people, and in response to a query about an object named in the database, return information about that entity. It is in short a nameserver for people and objects. It was designed to keep a relatively small amount of arbitrary information about a relatively large number of people or things, and provide access to that information over the Internet. In order to structure the information the manager of the database has to decide which views to present of the real-world objects that are to be represented in the database. Each view is then composed of a number of fields and their values. To support this concept Ph has the notion of named information, i.e., categorizing information into what are called fields and assigning descriptive names to those fields. Hedberg & Pomes Informational [Page 1] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 Even if the database resides and is reachable from the Internet it is local in the meaning that no server is supposed to be able to refer a client to another server which might hold the wanted information. However a server may contain a list of other Nameservers which can be used by clients to query other Nameservers for information. 1.1.1. Fields A field descriptor is associated with each field and is used to describe the type and behavior of the field. A field descriptor includes the fieldname, the maximum length of information the field can store before truncation, keywords describing the properties of the field as well as free text describing what kind of information the field is supposed to hold. The keywords can be any of the following: Always: Forces the field's contents to be always printed in addition to whatever fields specified by the query. Any: This field is always searched by queries. To be most use ful, a field marked as Any should also have the Indexed and Lookup keywords as well. Change: Can be changed by the owner of the entry. Default: Printed if no return clause is given in the query. Encrypt: Must be encrypted before transmission. ForcePub: Viewable/searchable regardless of the content of the suppress field Indexed: Fields that are kept track of in the database's index for efficient lookups. At least one indexed field must be present in each query. LocalPub: May be viewed by anyone in the "local" domain or address space. Fields with this keyword are completely invisible outside of the "local" domain. They will not be shown with the fields command (section 3.3), and are disallowed in query commands or return clauses (section 3.8). Lookup: May be used in the selection part of a query. A Field without this keyword may not be used to select entries. NoMeta: Wildcard searches are disallowed. Hedberg & Pomes Informational [Page 2] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 NoPeople: No entry of type "person" may include this field. Private: Field may be viewed by Heros (section 1.4) only. Public: May be viewed by anyone. Fields not marked with this keyword may only be viewed by the entry's owner or a Hero. Sacred: Changes to the field are prohibited except via non-network invocations of the server, i.e., from a tty, file, or pipe. Turn: Users may turn off visibility of a field to everyone except themselves and Heros by prefixing the field text with '*'. Unique: Any change to the field will be rejected if the change causes the modified field to match the same field in any other entry. 1.1.2. Character Sets Historically Ph has been restricted to only handle printable characters, that is characters with hexadecimal values between 0x20 and 0x7f. Lately with the spreading of 8-bit clean Operating Systems there is no reason to keep this limitation. This document therefore proposes that ISO-8859-1 shall be regarded as an alternative character set for Ph, the default still being US- ASCII. Clients that utilize ISO-8859-1 should request that the server return ISO-8859-1 by using the "set"-command. In the instance that values are stored using ISO-8859-1 and are to be shown to a client expecting US-ASCII, the characters with character codes outside of the US-ASCII range should be displayed in the "Quoted-Printable" content-transfer-encoding form defined in RFC-2045 [MIME]. 1.2. Standardization issues Each Nameserver manager is in essence free to name new fields to suit the special needs of his/her organization. But in order to make the directory service useful outside of the organization it is recommended that a core set of standard fields always should be present. Therefore this document defines a couple of standard collections of fields (Appendix A). Hedberg & Pomes Informational [Page 3] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 Also note that the architecture makes no assumption about the search and retrieval mechanisms used within individual servers. Operators are thereby free to use any kind of dedicated databases, fast indexing software or even gateways to other directory services to store and retrieve the information, if desired. Ph simply functions as a known front-end, offering a simple data model in addition to a well known port and simple query language. 1.3. Conventions Used in this Document In examples, "C:" and "S:" indicate lines sent by the client and server respectively. 1.4. Heros For Ph a Hero is equivalent to a superuser or operator. Being in Hero mode means that some or all artificial limits are removed; full Heros may change any field in any entry in the database, as well as view as many entries as they wish. Heros can also be limited to one field of one other entry. Hero mode is used mostly for administrative purposes, delegation of group authority over selected fields, and is controlled by the acl field. 2. Basic Operation Initially, the server host starts the Ph service by listening on TCP port 105. When a client host wishes to make use of the service, it establishes a TCP connection to the server host. The client and the Ph server then exchange commands and responses (respectively) until the connection is closed or aborted. 2.1. Command syntax Commands in Ph consist of a keyword optionally followed by zero or more keywords or values, separated by spaces, tabs or newlines, and followed by a carriage return-linefeed (CRLF) pair. A more thorough description using BNF is given in Appendix C. Values containing spaces, tabs or newlines must be enclosed in double quotes ('"'). In addition the sequences "\n", "\t","\"" and "\\" may be used to mean newline, tab, double quote and backslash, respectively. Keywords must be given in lower case; case in the values of fields is preserved, although queries are not case-sensitive. Hedberg & Pomes Informational [Page 4] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 2.2. Response syntax Responses consist of a result code followed by additional information possibly separated by entry index and/or field name and are terminated by a CRLF pair. result code:[entry index:][field name:]text Responses to some commands might be multi-lined. In these cases each line in the response, except the last, has the appropriate result code negated (prefaced with "-"). The last line then starts with the appropriate result code without negation. Each line must be terminated by a CRLF pair. If a particular command can apply to more than one entry, then the multilined response must be so organized that all information pertaining to each entry is returned on consecutive lines, and that each of those lines must have one and the same entry index directly following the resultcode. The first entry index should be 1 and incremented each time a new entry is referred to. C: query hedberg return email name title S: 102:There were 3 matches to your request. S: -200:1: email: canheg95@student.umu.se S: -200:1: name: Carl Johan Hedberg S: -200:1: title: Student S: -200:2: email: parheg95@student.umu.se S: -200:2: name: Par Hedberg S: -200:2: title: Student S: -200:3: email: Roland.Hedberg@umdac.umu.se S: -200:3: name: Roland Hedberg S: -200:3: title: Boss of the Network group S: 200:Ok Commands that can apply to more than one field must have the name of the field to which the response applies directly following the entry index. The text of the response will be either an error message in human readable format, or data from the Nameserver. Whitespace (spaces or tabs) may appear anywhere in the response, but the field name and text columns if present must each begin with a whitespace character. Since more than one specific piece of information may be manipulated by a particular command, it is possible for parts of a command to succeed, while other parts of the same command fail. This situation is handled as a single multi-line response with the result code changing as appropriate. Hedberg & Pomes Informational [Page 5] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 As for FTP, the result codes are in the range 100-699 (or from -699 to -100 for multiline responses), where the leading digit has the following significance: 1: In progress 2: Success 3: More information needed 4: Temporary failure; it may be worthwhile to try again. 5: Permanent failure 6: Phquery specific codes Many commands generate more than one line of response; every client should be prepared to deal with such continued responses. Note that a command is finished when and only when the result code on a response line (treated as a signed integer) is greater than or equal to 200. Clients should assume that any numeric response, within the above mentioned ranges, are valid. Also note that the server is allowed to send one or more lines with result codes between -199 - -100 (the leading "-" indicates a continuation line) and 100 - 199, as status information, before the actual results are transmitted. 2.3. Format of a search string Matching is not sensitive to upper or lower case letters and is normally done on a word-by-word basis. That is, both the query expression and the entry information is broken up into words, and individual words are compared using exact matching. If the order of the words is important in a query, then the query string can be surrounded by '"' (double quotes), whereby the complete search string is matched against the information in the Nameserver database. Word delimiters are the following characters: , , , ",", ";" and ":" . These characters are not indexed and should not be part of the search string. However, special symbols, called "wildcard" characters, can be used if the exact spelling is unknown. The '*' (asterisk, 0x2A) is used in place of zero or more characters, '+' (plus, 0x2B) in place of one or more unknown characters, and '?' (question mark, 0x3F) can be used when exactly one character is unknown. If the unknown character can be one of a limited set this can be specified by surrounding the set with brackets, e.g., [ei] means that in that place an 'e' or an 'i' would match. Hedberg & Pomes Informational [Page 6] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 3. Commands 3.1. status status Prints the message of the day and the current status of the nameserver. C: status S: 100:Qi server $Revision: 1.6 $ S: 100:Ph passwords may be obtained at CCSO Accounting, S: 100:1420 Digital Computer Lab, between 8:30 and 5 Monday-Friday. S: 100:Be sure to bring your U of I ID card. S: 200:Database ready 3.2. siteinfo siteinfo Returns information about the servers site. Possible fields are Version Version information for the server. Maildomain The mail domain to use for phquery-type mail. Mailfield The field containing the specific email address. Mailbox Mandatory entry that names the field to use as maildrop. Administrator Guru in charge of service. Passwords Person in charge of ordinary password/change requests. Authenticate Authentication methods supported by the server, ordered in the site-preferred way. Presently the following options are defined: 1 attempt auto login 2 allowed to be interactive if needed 4 use ANSI X9.9 challenge/response 8 use v4 Kerberos login 16 use v5 Kerberos [KRB5] login 32 use GSS-API [GSS-API] login 64 use email login 128 password encrypted response to challenge 256 use clear-text password 512 use HMAC [HMAC] with SHA-1 of challenge string Hedberg & Pomes Informational [Page 7] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 Example C: siteinfo S: -200:1:version:3.1 S: -200:2:maildomain:umu.se S: -200:3:mailfield:alias S: -200:4:mailbox:email S: -200:5:administrator:roland.hedberg@umdac.umu.se S: -200:6:passwords:roland.hedberg@umdac.umu.se S: -200:7:authenticate:64:32:128 S: 200: Ok. The mail fields in the siteinfo command direct how address information stored in the Nameserver is to be used for delivering mail. The specific (username, host) pair to where a user's mail should be sent for final delivery is stored in the field named by {mailbox}. Phquery and like utilities will use this field. To construct a useable email address from Nameserver information, the algorithm below is followed: if ({maildomain} is not null) then address = (contents of {mailfield})@{maildomain} else address = (contents of {mailfield}) Some existing client software will not format email addresses correctly if the value of {mailbox} is set to anything other than "email" when {maildomain} is non-empty. If {mailbox} is set to anything other than {email}, {maildomain} must be reported empty by the siteinfo command. Also reformatting of each record's {mailfield} must be done by the server before reporting it to the client. 3.3. fields fields [field ...] Without an argument, a list of all available field descriptors should be delivered. Any space-separated argument(s) restricts the list to the named fields. Fields marked with the "LocalPub" keyword (section 1.1.1) should not be delivered outside of the local domain. Hedberg & Pomes Informational [Page 8] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 The output of the command consists of two lines describing each field. The first line defines the field in technical terms (max length and field attributes), while the second line is a brief description of what the field is intended to hold. The second number of each response is the field id number. C: fields S: -200:6:alias:max 32 Indexed Lookup Public Default S: -200:6:alias:Unique name for user. S: -200:3:name:max 64 Indexed Lookup Public Default S: -200:3:name:Fullname S: -200:2:email:max 128 Lookup Public Default S: -200:2:email:Account to receive electronic mail. S: -200:16:other:max 256 Lookup Public Default Change S: -200:16:other:Other info the user finds important. S: -200:33:home_phone:max 60 Lookup Public Change Turn S: -200:33:home_phone:Home telephone number. S: 200:Ok. 3.4. id id information Enters the given information in the Nameserver's log. This command is used by the Ph client to enter the user id of the person running it. 3.5. set set [option[=value] ...] Sets the named option for this nameserver session to a value. The default string "on" is used if no value is supplied. Used without arguments it return the settable options and their current value. Some common options are echo If on, echo the client's commands back to the client. limit Changes that affect more than the specified number of entries results in an error. charset Return responses to the client in the character set specified. verbose If on, report interim progress messages to the client. addonly If on, change commands can only create fields in entries, not modify them. nolog If on, disable logging. external If on, make Fields marked as "LocalPub" invisible. Hedberg & Pomes Informational [Page 9] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 Example C: set verbose=off S: 200:Done. C: set S: -200:echo:off S: -200:limit:2 S: -200:charset:iso-8859-1 S: -200:verbose:off S: -200:addonly:off S: -200:nolog:off S: -200:external:on S: 200:Done. 3.6. login, logout, answer, clear, email, and xlogin 3.6.1. login login [alias] The "login" command allows client users to identify themselves to the Nameserver. More specifically it identifies a client user with a particular entry in the Nameserver and allows them to change fields in that entry and possibly other entries. It is also necessary to be logged in to the Nameserver to view certain sensitive fields in the user's own entry. In order to use the "login" command the client must prompt the user for their ph alias and password. The client is then responsible for (optionally) encrypting the password and sending it to the server. This will be covered in sections 3.6.3 (answer) and 3.6.4 (clear). C: login foo S: 301:,:P"_Y$ONU%"SDUQ6&^`ZZ'?*#Y`A_.Z/A>?@SH>*- 3.6.2. logout logout The "logout" command allows a user who is logged in to the Nameserver to logout. C: logout S: 200:Ok. Hedberg & Pomes Informational [Page 10] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 3.6.3. answer answer encrypted-response In response to the login command, the Nameserver responds with a random challenge string. The Nameserver client encrypts the challenge with the password supplied by the user, uuencodes the result into US-ASCII, and returns the printable result in the "answer" command: C: login ppomes S: 301:.%$&.D^67$*1?<.2S@DR:Z@M*)AV-<:4QM>#R>M*HT C: answer M5K'F:NI(a?M?O2+-a9`48RA#ZF=L9)G)/XRS7Q^0>0@-R7X$WGb`50B] S: 200:ppomes:Hi how are you? The encryption algorithm is based on a three rotor Enigma engine. There are known attacks on the security of this approach. The answer command is also used to return method-specific responses to the xlogin command (section 3.6.6). 3.6.4. clear clear cleartext-password The "clear" command can be used instead of the "answer" command to complete a login sequence. It's argument is the user's cleartext password. This command is supplied only to support those clients that have not implemented one of the encryption engines used by the "answer" command. It's use is strongly discouraged. C: login ppomes S: 301:E=@Y&VW^_9YVI;D5.[EB0:B)9Z#_&X$:2)/eL$VJC87 C: clear MySecret S: 200:ppomes:Hi how are you? 3.6.5. email email local-userid The "email" command can also be used instead of the "answer" command to complete a login sequence. The value of local-userid is the user's login name on the local machine. If all of the following conditions are true, then the email command will be accepted by the server: Hedberg & Pomes Informational [Page 11] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 1) The connection to the server originates on port 1023 or less on the client. Note: This is a system port. Port 1023 is not allocated to this use. 2) The canonical name of the client's host matches the right-hand side of the email address of the requested alias specified in the "login" command. 3) The "local-userid" matches the left-hand side of the email address belonging to the requested alias. This is a weak but convenient form of authentication. Depending on the information users are allowed to change about themselves and the threat environment the server operates in, this method may be appropriate. Servers should take care to avoid DNS spoofing. 3.6.6. xlogin xlogin option alias Extended login command for GSS, Kerberos v4 and v5, ANSI X9.9 token devices (e.g., SNK/4), etc. The option is one of the values returned in the Authenticate field of the "siteinfo" command (section 3.2). Alias is the user's alias. C: xlogin 16 ppomes S: 301:DoKrbLogin started; send Kerberos mutual authenticator. C: answer MJa8QO1cJHYz2IdWyg7uhAnixVqgCZQBWr64ciXYku1ktdu.... S: 200:ppomes:Hi how are you? C: xlogin 4 ppomes S: 302:SNK Challenge "024142": C: answer 82344338 S: 200:ppomes:Hi how are you? The answer command returns the requested quantity, Kerberos authenticator, X9.9 device response, etc. Binary quantities are first uuencoded into US-ASCII. 3.7. add add field=value... This command is used to add new entries to the database. You must be logged in and have full Hero privileges (section 1.4) to use "add". C: add name="doe john" id="123456789" alias="j-doe" S: 200:Ok. Hedberg & Pomes Informational [Page 12] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 3.8. query query [field=]value [field=value] . . . [return field1 [field2]] If no field is specified together with a value then the field is assumed to be "name" and/or "nickname". When more than one field- value specification are given in a query, entries matching all specifications are returned (implicit AND). It is possible to define which fields should be returned by adding a "return" clause. If no return clause is defined the Ph server will return a default list of fields. Typical default fields are "alias", "name", "title", "email", "phone", "address", "department", "www", and "other". A return clause consists of the word "return" followed by a list of fields or the word "all". If the word "all" is used then all viewable fields will be returned. C: query name=doe name=john S: 102:There was 1 match to your request. S: -200:1: alias: j-doe S: -200:1: name: doe john S: 200:Ok. 3.9. delete delete [field=]value... This command is used to delete entire entries from the database. You must be logged in and have full Hero (section 1.4) privileges to use "delete". The arguments to the "delete" command are the same as the selection part of a "query" command. "Delete" finds all the entries that match the argument(s) and deletes them. The "delete" command obeys the Nameserver "limit" option, which can be used to prevent deletion of more entries than intended. C: delete name="doe john" id="123456789" alias="j-doe" S: 200:1 entries deleted. 3.10. change change [field=]value [make|force] field="value"... This command is used to change one or more fields in one or more entries to the values specified. The "change" command consists of two clauses, the "change" clause and the "make" or "force" clause. Hedberg & Pomes Informational [Page 13] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 The "change" clause determines which entries will be affected by the command. It uses the same arguments as the selection clause of a "query" command. The "make" or "force" clause specifies which field(s) will be changed and the new value(s) of the specified field(s). The "force" clause is only used to make non-encrypted changes to fields marked "Encrypt". You must be logged in to use "change". The "change" command obeys the Nameserver "limit" option, which can be used to prevent changing the field contents of more entries than intended. C: change alias=j-doe force password=NewSecret S: 200:1 entry changed. C: set limit=500 S: 200:Done. C: change fax="(619) 555-1212" make fax="(760) 555-1212" S: 200: 113 entries changed. 3.11. help help [{native|client} [topic ...]] Prints help on the Nameserver or on specific clients. If client is specified, it should be a valid Nameserver client identifier, such as "ph". The client-specific help will first be searched for topic, and then the native help will be searched. If topic is omitted, a list of all available help texts will be returned. If "native" or client are also omitted, a list of clients will be returned. C: help native 101 -200:1:101: -200:1: The Nameserver echo option is set. The text of this response is -200:1: the command you just gave, which has not (yet) been executed. 200:Ok. 3.12. quit/exit/stop quit Terminates the session with the Nameserver and causes the client to exit. C: quit S: 200:Bye! Hedberg & Pomes Informational [Page 14] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 4. Security 4.1. Transport Layer In the absence of encryption between client and server, all Nameserver traffic is unsecure. Kerberos v4, v5, and the GSS-API all provide encryption mechanisms, however the Nameserver protocol does not support the means to negotiate encryption between client and server. This implies that all traffic can be seen by other machines having access to the network linking the client and server. Furthermore clear-text traffic is subject to modification in transit between client and server. Possible ways of augmenting this would be to use something like TLS [TLS] or IPSec [IPSEC]. 4.2. Server Authentication Unless one of the mutual authentication mechanisms is used, e.g., Kerberos 4/5 or GSS-API, there is no way to prove the identity of a server. Further, there is no mechanism to prove a given server is authoritative for a set of information. 4.3. Secure User Authentication The Ph protocol allows the negotiation of several authentication protocols between client and server, some weak and some strong. It does not prohibit the use of cleartext passwords, something which should be depreciated, but is useful when dealing with some clients. 4.4. Privacy and Access Lists Directory services like the CCSO white pages server that contain information on persons have to consider privacy issues. This paper describes one way of partitioning specific attributes from unwanted access by designating them visible only to the "local" community, visible only to the person connected with the information, or visible only to the database administrator. Hedberg & Pomes Informational [Page 15] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 4.5. References [GSS-API] Linn, J., "Generic Security Service Application Program Interface, Version 2", RFC 2078, January 1997. [HMAC] Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed- Hashing for Message Authentication", RFC 2104, February 1997. [IPSEC] Atkinson, R., "Security Architecture for the Internet Protocol", RFC 1825, August 1995. [KRB5] Kohl, J., and C. Neuman, "The Kerberos Network Authentication Service (V5)", RFC 1510, September 1993. [TLS] Dierks, T., and C. Allen, "The TLS Protocol, Version 1.0", Work in Progress. [MIME] Freed, N., and N. Borenstein, "Multipurpose Internet Mail Extensions, (MIME) Part One: Format of Internet Message Bodies", RFC 2045, November 1996. 5. Miscellaneous 5.1. Authors' Addresses Roland Hedberg Umdac Umea University 901 87 Umea Sweden EMail: Roland.Hedberg@umdac.umu.se Paul Pomes Qualcomm Inc 6455 Lusk Blvd San Diego, CA USA EMail: ppomes@qualcomm.com Hedberg & Pomes Informational [Page 16] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 Appendix A Default fields and suggested lengths connected to different object types. All entries: Information common to all entries type 64 name 256 address 128 proxy 32 password 32 type=phone: Information found in a phonebook phone 64 fax 64 type=person: Information about a human being alias 32 forename 64 surname 64 group 32 email 128 public_key 4096 nickname 128 www 256 acl 128 type=staff: Information about an employee empno 16 department 64 supervisor 64 secretary 64 office_location 128 office_address 128 office_phone 64 title 64 pager 64 hours 128 type=unit: Information about an organizational unit email 128 www 256 public_key 4096 Hedberg & Pomes Informational [Page 17] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 Appendix B Result codes 100 In progress (general). 101 Echo of current command. 102 Count of number of matches to query. 103 No hostname found for IP address. 200 Success (general). 201 Database ready, but read-only. 300 More information (general). 301 Encrypt this string. 302 Print this prompt. 400 Temporary error (general). 401 Internal database error. 402 Lock not obtained within timeout period. 403 Login would have been OK, but database read-only 475 Database unavailable; try later. 500 Permanent error (general). 501 No matches to query. 502 Too many matches to query. 503 Not authorized for requested information. 504 Not authorized for requested search criteria. 505 Not authorized to change requested field. 506 Request refused; must be logged in to execute. 507 Field does not exist. 508 Field is not present in requested entry. 509 Alias already in use. 510 Not authorized to change this entry. 511 Not authorized to add entries. 512 Illegal value. 513 Unknown option. 514 Unknown command. 515 No indexed field in query. 516 No authorization for request. 517 Operation failed because database is read-only. 518 To many entries selected by change command. 520 CPU usage limit exceeded. 521 Change command would have overridden existing field, and the "addonly" option is on. 522 Attempt to view "Encrypted" field. 523 Expecting "answer" or "clear". 524 Names of help topics may not contain "/". 525 Email authentication failed 526 Host name address not found in DNS 527 Reverse DNS lookup does not match forward DNS lookup 528 General Kerberos database error. 529 Selected authentication method not available Hedberg & Pomes Informational [Page 18] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 590 Remote queries not allowed. 598 Command unknown. 599 Syntax error. 600 Ambiguous or multiple match Hedberg & Pomes Informational [Page 19] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 Appendix C Description of the client command language using the augmented Backus-Naur Form (RFC822). response = code [index] [field] text CRLF code = [-] LDIG 2DIGIT ":" index = number ":" field = 1*SPACE attribute ":" 1*SPACE text = 1*( CHAR / LWSP-char ) command = ph-command CRLF ph-command = "status" / a-command / oa-command ph-command =/ av-command / answer-command / query-command ph-command =/ delete-command / change-command / "help" / quit-command a-command = ("siteinfo"/"fields"/"id"/"login"/"help"/"email"/ "clear") [attribute] oa-command = ("xlogin") number attribute av-command = ("set"/"add"/"make") 1*attribute-value answer-command = ("answer") 1*printable query-command = ("query"/"ph") 1*selection ["return" 1*attribute] quit-command = "quit" / "exit" / "stop" change-command = "change" 1*selection make 1*attribute-value delete-command = "delete" selection selection = value / attribute-value attribute-value = attribute "=" value value = 1*(cstring / quoted-string / set) cstring = 1*( ALPHA / DIGIT / S_SPEC / set / quoted-pair ) attribute = 1*( ALPHA / DIGIT / "_" / "-" ) number = 1*(DIGIT) quoted-string = <"> 1*(qtext/quoted-pair) <"> quoted-pair = "\" CHAR qtext = 1*( CHAR / CR / SPEC1 / DELIMIT1 / DELIMIT2 / LWS ) set = '[' 1*(ALPHA/DIGIT) ']' LWSP-char = SPACE / HTAB LWS = 1*([CRLF] (LWSP-char)) CRLF = CR LF Hedberg & Pomes Informational [Page 20] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 S_SPEC = '*'/'+'/'?' SPEC1 = "=" / "*" / "?" / "+" / "[" / "]" SPEC2 = "\" / """ DELIMIT1 = SPACE / HTAB / LF DELIMIT2 = "," / ";" / ":" PRINTABLE = %d32..%d126 CTL = %d0..%d31 / %d127..%d160 ALPHA = %d65..%d90 / %d97..%d122 DIGIT = %d48..%d57 LDIG = %d49..%d54 SPACE = %d32 SEP = (CR LF) / LF CR = %d13 LF = %d10 HTAB = %d9 CHAR = %d33..%d126 / %d160..%d255 OTHER = "(" / ")" / "-" / "." / "/" "@" / "$" / "_" / "!" / "~" / "'" / "#" / "&" / "<" / ">" / "^" / "`" / "{" / "|" / "}" Hedberg & Pomes Informational [Page 21] RFC 2378 The CCSO Nameserver (Ph) Architecture September 1998 Full Copyright Statement Copyright (C) The Internet Society (1998). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Hedberg & Pomes Informational [Page 22]