Table of Contents

Name

i128 - Number 9 I128 video driver

Synopsis


Section "Device"
  Identifier "devname"
  Driver "i128"
  ...
EndSection

Description

i128 is an XFree86 driver for Number 9 I128 video cards. The driver is accelerated and provides support for all versions of the I128 chip family, including the SGI flatpanel configuration. Multi-head configurations are supported.

Supported Hardware

The i128 driver supports PCI and AGP video cards based on the following I128 chips:
I128 rev 1
(original)
I128-II
I128-T2R
Ticket 2 Ride
I128-T2R4
Ticket 2 Ride IV

Configuration Details

Please refer to XF86Config(5) for general configuration details. This section only covers configuration details specific to this driver.

The driver auto-detects the chipset type and may not be overridden.

The driver auto-detects the amount of video memory present for all chips and may not be overridden.

The following driver Options are supported:

Option "HWCursor" "boolean"
Enable or disable the HW cursor. Default: on.
Option "SWCursor" "boolean"
Enable or disable the SW cursor. Default: off.
Option "NoAccel" "boolean"
Disable or enable acceleration. Default: acceleration is enabled.
Option "SyncOnGreen" "boolean"
Enable or disable combining the sync signals with the green signal. Default: off.
Option "Dac6Bit" "boolean"
Reduce DAC operations to 6 bits. Default: false.
Option "Debug" "boolean"
This turns on verbose debug information from the driver. Default: off.

The following additional Options are supported:

Option "ShowCache" "boolean"
Enable or disable viewing offscreen cache memory. A development debug option. Default: off.

See Also

XFree86(1) , XF86Config(5) , xf86config(1) , Xserver(1) , X(7)

Authors

Authors include: Robin Cutshaw (driver), Galen Brooks (flatpanel support).

Table of Contents